Experience

• 

  PRETECT Qatar

  • Doha, Qatar

  • Rope Access Supervisor with advance NDT Techinican

    • Nov 2022 - Present
    • Doha, Qatar

    Carrying out Maintenance Assessment and On-Stream Inspection utilising non-destructive testing (NDT) such as Visual, Ultrasonic, Magnetic Particle, and Dye Penetrant on offshore facilities to ascertain their integrities and recommend necessary action are taken as per required codes, standards, and specification.All work was carried out by the use and following of the isometric drawing.Carried out NDT method like VT/MT/PT/UT Prepare final document reports accordance to client reporting and document system.Assisting the API inspector for inspection data evaluation, recording, corrosion rate assessment, Remaining life calculation and minimum required thickness determination.Coordinate with a team of Multi-disciplined NDT technicians in their completion of specific inspection and testing tasks and to monitor and perform periodic verification of test results. Perform Safe Work While on Client Sites.Leadership of Field Technicians assigned.Work Involve the inspection of welding of various sized Nozzles and Nodes and pipe using UT and MT Method, also inspection work involves Ultrasonic scans on the welding covering the full circumference of various vessels and ultrasonic corrosion survey on pipelines.

• 

  SGS

  • Angola

  • Rope Access level 3 Supervisor with Multi techinican

    • Jan 2021 - Mar 2022
    • Angola

    Corrosion inspection of pressure vessel (separators, exchangers, filters, tower, drums and scrubbers and pressure relieving devices by various NDT methods.Performed ultrasonic testing of Piping/pressure vessel in detection of corrosion, erosion, and pitting.UT thickness survey thickness gauge meter for pipe and equipment.Carried out Dye Penetrate Inspection on vessels, Exchanger, Heat radiant coil, Column and Boiler Components.

• 

  Global Energy Ventures

  • Côte d'Ivoire

  • Rope Access Supervisor

    • Jul 2019 - Jan 2020
    • Côte d'Ivoire

    Eddy current inspection in defect detection of leg node connection, Crane weld and Vent boom weld.Assisting the API inspector for inspection data evaluation, recording, corrosion rate assessment, Remaining life calculation and minimum required thickness determination.Preparation of inspection report, thickness survey report and pressure vessel inspection record. Responsible for communicating and enforcing site safety procedures, daily toolbox meetings within inspection group.Work Involve the inspection of welding of various sized Nozzles and Nodes and pipe using UT and MT Method, also inspection work involves Ultrasonic scans on the welding covering the full circumference of various vessels and ultrasonic corrosion survey on pipelines.Complying with Permit to work systems & report writing with MS- Office word & Excel.

• 

  OES Asset Integrity Management

  • Saudi Arabia

  • Rope Access Supervisor

    • Mar 2019 - Jul 2019
    • Saudi Arabia

    Rope access level 3 supervisor

• 

  DNV GL

  • Al Khor, Qatar

  • Rope access Level 3 Supervisor

    • Nov 2018 - Feb 2019
    • Al Khor, Qatar

    Carrying out Maintenance Assessment and On-Stream Inspection utilising non-destructive testing (NDT) such as Visual, Ultrasonic, Magnetic Particle, and Dye Penetrant on offshore facilities to ascertain their integrities and recommend necessary action are taken as per required codes, standards and specification.Have Done As A Assistant of LRUT Operation on Pipes and Pipe Lines At Offshore Platform.Connect The Probe Set At Overhead Pipes and Scanning The Required Area By Manual UT For Confirmation of Defect Using Rope Access.

• 

  RusselSmith Group

  • NIGERIA

  • ROPE ACCESS L3 SUPERIVICIER

    • Dec 2015 - Feb 2018
    • NIGERIA

    Carrying out Maintenance Assessment and On-Stream Inspection utilising non-destructive testing (NDT) such as Visual, Ultrasonic, Magnetic Particle, and Dye Penetrant on offshore facilities to ascertain their integrities and recommend necessary action are taken as per required codes, standards and specification.Have Done As A Assistant of LRUT Operation on Pipes and Pipe Lines At Offshore Platform.Connect The Probe Set At Overhead Pipes and Scanning The Required Area By Manual UT For Confirmation of Defect Using Rope Access.

• 

  MOZZAT ENTERPRISE SDN BHD

  • Brunei Darussalam

  • ROPE ACCESS L3 With NDT INSPECTOR

    • Sep 2014 - Nov 2015
    • Brunei Darussalam

    Ultrasonic corrosion monitoring of defined process piping to detect internal wall Loss.UT thickness survey of tanks & pressure vessels. Close Visual Inspection of riser, small bore piping,vessels,tank.Familiar with isometric & updating of as built.Complying with Permit to work systems & report writing with MS- Office word & Excel.

• 

  PACIFIC HIGH TECH ENGINEERING SERVICES

  • MYANMAR

  • ROPE ACCESS WITH MULTI NDT INSPECTOR

    • Apr 2014 - Jul 2014
    • MYANMAR

    Ultrasonic corrosion monitoring of defined process piping to detect internal wall loss.UT thickness survey of tanks & pressure vessels.Close Visual Inspection of defined pressure piping systems ,support & pressure vessels.Familiar with isometric & updating of as built. Complying with Permit to work systems & report writing with MS- Office word & excel.

• 

  Megarme

  • QATAR

  • ROPE ACCESS WITH MULIT NDT INSPECTOR

    • Feb 2014 - Mar 2014
    • QATAR

    Ultrasonic corrosion monitoring of defined process piping to detect internal wall loss. UT thickness survey of tanks & pressure vessels. Close Visual Inspection of defined pressure piping systems ,support & pressure vessels. Familiar with isometric & updating of as built. Complying with Permit to work systems & report writing with MS- Office word & excel.

• 

  Seatek

  • mumbai

  • ROPE ACCESS WITH MULTI NDT INSPECTOR

    • Nov 2013 - Dec 2013
    • mumbai

    Eddy current inspection of crack detection. Eddy current inspection in heat exchanger Eddy current inspection of material identification. Carried out MPI on socket weld, nozzle, fillet weld and inspection on mechanical components by using different methods like wet method, dry method and fluorescent method using Yoke.UT lamination check on raw materials. Carried out UT Scanning on Butt weld joints, Tee joints. MPI carried out on field pressure piping welded area. PT of field bevel and completed assemblies. PT on condenser, strippers on welded joints.

• 

  Global Remote Integrated access solutions

  • OMAN

  • NDT inspector WITH ROPE ACCESS TECHNICIAN

    • Sep 2011 - Jun 2013
    • OMAN

    Ultra Sonic lamination survey & corrosion survey for on pipelines, Storage Tanks & Pressure Vessels and Welds.Ultra Sonic thickness measurement on pipelines, plates, storage tanks, and industrial components.Familiar with isometric & updating of as built.Complying with Permit to work systems & report writing with MS- Office word & excel.

• 

  international inspection services ltd

  • UAE

  • NDT MULIT TECHNICIAN

    • Aug 2011 - Oct 2012
    • UAE

    Visual inspection Reporting & Documentation as per client specification.VT of Piping, process piping & structure.MPI carried out on field pressure piping welded area.MT of equipments on running plants.PT of field bevel and completed assemblies.PT on condenser, strippers on welded joints. On-line inspection thickness gauge measurement for various products & corrosion monitoring. UT Thickness of pressure vessel & process piping.Ultrasonic testing of plates pipes for lamination.Carried out UT thickness survey, corrosion monitoring & as well as weld scan in Columns, Vessels, Tanks, Exchangers Separators, Fuel Gas Drum, nozzles & equipment’s etc.Carried out RT on Weld Joints of Pipes, plates and industrial components.Job scope include the radiographic on tanks, vessels, pressure parts pre-fabricated weld joints using gamma ray. Carried out RT works, like preparation Shooting, Developing, and reporting on weld joints, pipe lines, plates and industrial components etc.Carried out MPI on socket weld, nozzle, fillet weld and inspection on mechanical components by using different methods like wet method, dry method and fluorescent method using Yoke.

• 

  NDT& Corrosion Control Services. Damma, Saudi Arabia

  • Saudi Arabia

  • NDT MULIT TECHNICIAN

    • Apr 2008 - Aug 2009
    • Saudi Arabia

    Carried out Ultrasonic Lamination Check for Raw Materials, Weld Scan, Thickness Measurement & Corrosion Check on Pipe Lines, Pressure Vessels & Tanks.Carried out Radiographic Testing on Welding seems of pipe lines having various sizes. Carried out RT on various components and plates.Familiar with film interpretation.Liquid Penetrant and magnetic particle examination of nozzle joint, fillet weld and valve castings, evaluation and reporting. Penetrant inspection on pump casings, pipe lines and shafts etc.