Experience

• 

  SKD Group of Companies

  • Bahrain
  • Construction
  • 200 - 300 Employee

  • QA/QC Engineer_ Project

    • Jan 2022 - Feb 2024

    2nd Project Name: Wadi Al Buhair Roads & Infrastructure Works Stage-1, Grading and Stormwater WorksClient: Ministry of Works (MoWMAUP) Consultant: AECOM Middle East Limited Dated Started: January 3, 2022- to February 29, 2024Job Profile (Responsibilities include but are not limited to :)To ensure quality control systems are implemented in the project.To prepare & submit MS,ITP,MAC, related to particular activities in the project. Submit to consultant for approval.To raised an IR, MIR, RFI, and submit to consultant along with supporting documents.To maintain and monitor the register log (i.e test log, IR log, concrete log) & other related QC log. And ensure daily updated.To ensure and do surveillance on site activity and report if any non-conformance works observed. And issue NCR.Carry out inspections on site with consultant and ensure to get an approval prior proceeding to next activity. To checked & ensure site activities has executed as per approved method Statement, ITP, drawings, & specifications.Conduct Inspection of different works[Storm water pipeline, earthworks, excavation, blinding, paving blocks, Asphalt works (sub base, road base, Asphalt base course, Asphalt wearing course).Conduct site material Inspections w/c delivered and used at site with consultant.

  • QA/QC Engineer

    • Feb 2019 - Jan 2022

    Position/Designation: Qa/Qc Engineer1st Project Name: Sub-con of Aldur Phase 2 Independent Water and Power EPC Contractor: SEPCO III Construction CompanyClient: HAYA Power and Desalination Company Consultant: ILF Consulting Engineers Date Started: March 2, 2019, to Jan.03, 2022Job Profile (Responsibilities include but are not limited to :)To ensure quality control systems are implemented in the project.To prepare & submit MS,ITP,MAC, related to particular activities in the project. Submit to consultant for approval.To raised an IR, MIR, RFI, and submit to consultant along with supporting documents.To maintain and monitor the register log (i.e test log, IR log, concrete log) & other related QC log. And ensure daily updated.To ensure and do surveillance on site activity and report if any non-conformance works observed. And issue NCR.Carry out inspections on site with consultant and ensure to get an approval prior proceeding to next activity. To checked & ensure site activities has executed as per approved method Statement, ITP, drawings, & specifications.Conduct Inspection of different works[Storm water pipeline, earthworks, excavation, blinding, paving blocks, Asphalt works (sub base, road base, Asphalt base course, Asphalt wearing course).Conduct site material Inspections w/c delivered and used at site with consultant.

• 

  NASS Group & Corporation

  • Bahrain

  • Qa/Qc Engineer

    • Jul 2017 - Feb 2019
    • Bahrain

    Company: Nass Contracting Company Project/Location: Alba Power Station 5 (GAMA Project) - Civil Works / BahrainClient: Aluminum Bahrain B.S.C. (ALBA)Position level: Qa/Qc EngineerIndustry: Construction/Building/ EngineeringDate Joined: July 1, 2017- to Febuary 10, 2019Job Profile (Responsibilities include but are not limited to :) To ensure quality control systems are maintained in accordance with recognized working practices and the Company’s Quality Control Manual. Receive details of any test/trials carried out and that the methods used to achieve such information have been correctly applied. To check Technical details and to discuss with Client any discrepancies where minimal/excess limits are outside designed parameters or will in any way impair operating performance. To discuss all readings/results with Client’s Representative and to ensure his understanding of the same. To ensure liability exemption forms are prepared and issued to the correct authority in all cases where specifications/instructions/materials are contrary to normal working practice, or does not conform to the Company’s Quality Control Procedures. To collect all relevant information in accordance with contract completion procedures for purposes of maintaining Services records as detained within the Company’s Quality Control Procedures. To ensure all diagnostic equipment is correctly used, stored, maintained and re-calibrated within the parameters laid down in the relevant Quality Control Procedure. To maintain a register of all the Services diagnostic equipment as laid down in the relevant Quality Control Procedure. To stop any job that considers is being done contrary to normal working practice or does not conform to the Company’s Quality Control Procedures. Supervision received/General guidance from Project Manager, Qa/Qc Manager & Contract Manager. Prepare NFI/IR and other documents pertaining to Inspection.

• 

  BESIX

  • Belgium
  • Construction
  • 700 & Above Employee

  • QA/QC Engineer

    • Mar 2016 - Jun 2017

    Project: Hamad International Airport Extension of Taxiways and Parking standsLocation: Hamad International Airport, QatarPosition level: Qc EngineerSpecialization: International building & civil contractorsIndustry: Construction/Building/ EngineeringDate Joined: March 12, 2016- to presentJob Profile (Responsibilities include but are not limited to :) Conduct Inspections on Earthworks, Subgrade, Subbase, Base course, Portland Cement Concrete pavement. Prepare RFI and other related documents pertaining to Inspection. To witness and inspect concrete trial mix, compaction test, MDD proctor, CBR, CPT. To carry out inspections with the consultant, witnessing, monitoring, all as per the requirements of Inspection and Test Plan (ITP). Organizing quality control inspections for materials received by the site stores Inspecting the quality of the material produced or processed on site ( such as concrete or ready to place steel reinforcement bar) Report all Non-conformities. Take corrective and preventive actions. Supervise the laboratory and all testing’s. Maintaining QA/QC records. Weekly inspection report to the Quality manager. Monthly report and logs to the Quality Manager. Update Inspection Request, Material Inspection Log and other related QC items. Monthly updated IR and NCR log given to planning department as per request. Implement the requirements of the specifications and the manufacturer’s recommendations Implement quality control works to be done on site. Implement the requirements as per specifications and approved shop drawings on site.

  • QA/QC Engineer

    • Oct 2014 - Mar 2016

    Company: Six Construct Limited, Qatar Project/Location: Salwa Resort (Marine Works)-Breakwater &beaches/QatarClient: Private Engineering OfficePosition level: Qa/Qc EngineerSpecialization: International building & civil contractorsIndustry: Construction/Building/ EngineeringDate Joined: October 8, 2014 to March 11, 2016Job Profile (Responsibilities include but are not limited to :) Conduct Inspections on Quay wall Installations such as geotextile, armour rocks, 50/150 aggregates, quarry run, quay wall blocks. To carry out inspections with the consultant, witnessing, monitoring, all as per the requirements of Inspection and Test Plan (ITP). To be vigilant and active on site and to pick-up deficiencies, faults, non- compliance of any work on the job site, and report immediately to Qa/Qc manager. To check and verify that the latest approved documents are being employed at the work place on site. Only drawings stamped ‘For Construction’ are at the work place and must be latest revision. To ensure ‘Safety’ is practiced on site. Any safety hazard noticed will be reported immediately to safety officer or personnel concerned on site. To adequately use the “Inspection Request Form” and ensure that the results of the inspection are clearly indicated on the inspection request. Any non-conformity observed on site shall immediately be reported to the concerned personnel for immediate rectification. In case rectifications are not immediately possible, an “Improvement Action Reports” will be raised. Carry out Inspections on quay wall block formworks, rebar, and monitored the concreting works and checked the concrete suitability test. Carry out Inspections such as infrastructure works, earthworks, to witness (Field density test, plate load test, concrete suitability test, rebar test)

  • QA/QC Engineer

    • Feb 2012 - Oct 2014

    Project: Four Seasons HotelLocation: Bahrain BayPosition level: Qa/Qc InspectorSpecialization: international building & civil engineering contractorsIndustry: Construction/building/engineeringDate Joined: February 19, 2012 – October 7, 2014Job Profile (Responsibilities include but are not limited to :) Conduct Inspection on building structures such as waterproofing, rebar, formworks, and concreting and MEP services.  Earthworks, backfilling, compaction test, road works such as base course, asphalt. To assists and advises the construction team to ensure adherence to the drawings, specifications and procedures. Ensures that proper and effective coordination is developed with sub-contractors and consultants in relation to inspections and Quality control procedures. To inspect the works and materials with respect to specifications, latest approved drawings and approved relevant documents. To be vigilant and active on site and to pick-up deficiencies, faults, non-compliance of any work on the job site. And report immediately to the concerned personnel and initiate to rectify/correct the work. To check and verify that the latest approved documents are being used at the work place on site. All drawings stamped “FOR CONSTRUCTION” are at the work place and must be of latest version/revision. To liaise with the Consultant when required to carry out inspection and obtain approval as per ITP for relevant activity. To ensure “Safety” is practiced on site. Any hazard noticed shall be reported immediately to the Safety Officer. Prepare “Inspection Request Form” and ensure that the results of the inspection are clearly indicated on the inspection request. Conduct inspection on Structural & infrastructure works. To witness/ check concreting works.

• 

  Joannou & Paraskevaides (overseas) Ltd. Qatar W.L.L.

  • Al Wakra Qatar

  • Site-QC Engineer

    • Mar 2009 - Mar 2011
    • Al Wakra Qatar

    Project: Al Wakra HospitalLocation: al wakra, QatarPosition Level: QC-Site EngineerSpecialization: International building & civil engineering contractorsIndustry: Construction/building/engineeringDate Joined: March 28, 2009- March 29, 2011Job Profile (Responsibilities include but are not limited to :) Implement and supervise the activities under my responsibility and ensure that the work is being done as per required plans and specifications. Oversee and monitor infrastructures works under my area of responsibility. Plan daily activities and weekly look ahead programs of manpower, materials, & equipments. Coordinates with section engineer and also to construction manager any change of works based on plans and shop drawings. Supervised and monitor ASPHALT works, road works, preparations, FDT, and levels. Check and monitor road Curbstones’ & Edgekerbs works and backfilling works. Coordinate sub contractors under my area of responsibility. Reports any discrepancy of plans to actual condition. Review plans prior to implementation. Ensure safety procedure and followed at the course of execution. Conduct field density test with the site laboratory and ensure that will passed Accordance with the percent density required. Conduct Inspection with the consultant in times of site inspections.

• 

  D.M. CONSUNJI, INC. (DMCI)

  • Pasig City, Philippines

  • Site Supervisor

    • Mar 2007 - Feb 2009
    • Pasig City, Philippines

    Project: 12 Five-Storey Condominium Buildings with Amenities Location: Dr. Sixto Antonio ave. Caniogan Pasig CityPosition level: Field Engineer/ SupervisorSpecialization: Engineering-civil/ConstructionIndustry: Construction/building/EngineeringDate Joined: March 21, 2007- February 28, 2009Job Profile (Responsibilities include but are not limited to :) Execute and monitors a particular phase of work with respect to sequence, plans schedule. Coordinates with superintendent of any variations change in work method that may arise during constructions based on plans and shop drawings. Implement effective usage of labor, material, and equipment to increase productivity of resources at his disposal. Trains and develop skills efficiency of workers under my command. Responsible in setting up strict compliance with safety practices, internal policies, rules and regulations of the company. Conduct Inspection of Rebar’s installed before the concreting of structure.  Supervise & monitor of structural work, formworks, concreting and architectural works. Conduct punch listing, snagging.