Experience

• 

  TECO Australia & New Zealand

  • New Zealand

  • Sales Engineer

    • Jul 2023 - Present
    • New Zealand

• 

  TRind Service Limited - Matamata

  • Matamata, Waikato, New Zealand

  • Service Center Manager Waikato/BOP

    • Jul 2021 - May 2023
    • Matamata, Waikato, New Zealand

    Manage all aspects of the day to day running of the branch.Overseeing the maintenance, repairs, and rewinding of all types of electrical apparatus and associatedmechanical equipment repairs.Ensure all work is performed in accordance with company quality and safety expectations.Perform onsite maintenance, repairs and replacement of parts as required by customers.Liaise with customers and staff at all levels.Preparation of estimates and firm quotations to customers when required.Manage all major rewind and service projects which could involve coordinating work through third parties.Manage and administer the financial information within the branch to ensure the smooth and accurate management, billing and charging of clients and ensure all financial information is accurate and up to date at all times.Resolving customer problems as needed.Performing staff training as required.

• 

  Trind Service Ltd - Matamata

  • Service Centre Manager Waikato

    • Feb 2021 - Jul 2021

    Manage all aspects of the day to day running of the branch.Overseeing the maintenance, repairs, and rewinding of all types of electrical apparatus and associated mechanical equipment repairs.Ensure all work is performed in accordance with company quality and safety expectations.Perform onsite maintenance, repairs and replacement of parts as required by customers.Liaise with customers and staff at all levels.Preparation of estimates and firm quotations to customers when required.Manage all major rewind and service projects which could involve coordinating work through third parties.Manage and administer the financial information within the branch to ensure the smooth and accurate management, billing and charging of clients and ensure all financial information is accurate and up to date at all times.

  • Service Centre Supervisor

    • Aug 2020 - Feb 2021

    PURPOSEManage all aspects of the day to day running of the branch.This encompasses the repair, rewinding and servicing of all types of electrical and mechanicalequipment: this also encompasses sales of the company’s service capabilities and the productsrelating to the service it provides its customers.Administration activity to ensure the profitability of the companySPECIFIC DUTIES & RESPONSIBILITIESSolely responsible to oversee all electrical/mechanical work done at branch and on siteInstallation, Commissioning, Fault Finding, Repairs and Sales of WEG Drives and MotorsConvert and Upgrade Motors for Explosive Areas, Totally Enclosed Air Over Motors and Brake MotorsService Work done on OFF-SHORE Oil Rigs & Production Platforms Carry out maintenance, repairs, and rewinding of all types of electrical apparatus and associatedmechanical equipmentCarry out onsite maintenance, repairs and replacement of components Organizing the day to day activities of the branch, by way of job management and sales activity.Preparation of estimates and firm quotations to customers when required.Liaise with customers and staff at all levels.Overseeing all major rewind and service projects which could involve coordinating work through 3rd parties.Efficiently administering the financial information within the branch to ensure the smooth and accurate management, billing and charging of clients and ensure all financial information is accurate and up to date at all times.GENERAL DUTIES & RESPONSIBILITIESPrioritize workload to ensure work of the greatest importance to the business is undertaken with urgency and to a high standard.Support and help develop a positive workplace culture.Demonstrate excellent interpersonal communication skills.Responsibly manage all business resources within accountability levels.

• 

  TRind Services Ltd - Matamata

  • Electrical/Mechanical Service Technician

    • Jan 2018 - Aug 2020

  • Service Technician

    • Jan 2018 - Jan 2018

    Technician for WEG equipment - Installation, Commissioning, Fault Finding, Repairs and Sales of WEG Drives and Motors. Laser Alignment and Vibration Analysis of Equipment (WEG and other). Convert and Upgrade Motors for Explosive Areas, Totally Enclosed Air Over Motors and Brake Motors. Service Work done on Oil Rigs & Production Platforms - Puhukura Wellhead OFF-SHORE Platform(COSL BOSS - PPB Project), MAARI Platform & KUPE Production Station.

• 

  P Electrical

  • Waikato, New Zealand

  • Electrician

    • Sep 2016 - Dec 2017
    • Waikato, New Zealand

    Electrical installations – new domestic dwellings from ground up to fit-off-Laying of ducting for mains cables and data/fibre cables-Layout of house, pre-wiring, wiring of electrical and data cables-Installing and terminating of Meter Boards, Data Boards, Switch boards-Installing and positioning of ventilation ducts-Fitting off all new electrical equipment and data connection (RJ45 & COAX)

• 

  National Oilwell Varco

  • United States
  • Oil and Gas
  • 700 & Above Employee

  • Project Planner

    • Oct 2015 - Jul 2016

    Project Planner - Electrical & Mechanical.Manage cost, on-time delivery and quality control of projects Attend Planning & Production MeetingsProject management of jobs: Obtaining quotations from vendors & ordering of partsCustomer liaison: Provide customer with constant updates Compiling job procedure files & summary reports Any additional activity required to ensure project is done on time, within cost and at the required quality If repair is required for project, initiate and co-ordinate the repair Performing any other duties as reasonably required by Management. Carrying out all duties in accordance with the quality assurance procedures / departmental works instructions Conduct operations in a manner that promotes safety & comply with OHS standards Report and action all deviations found on work performed.

  • Repair Technician (BOP/PCE)

    • Nov 2013 - Oct 2015

    As a repair technician at NOV we maintain and refurbish all NOV assets owned by the oil rig company. We are exposed to all types and makes of equipment related to the oil rig. We are responsible for the disassembly, inspection, servicing, repairing, rebuilding, testing and certifying the equipment to the required quality standards and in accordance with documented standards and procedures before being placed in service.In a busy workshop environment we adhere to all HSE standards to ensure the safe working of all work done. We completed all relevant documentation relevant to the work such as inspection and test reports before handing over the jobs.We maintain and repair facility equipment; maintain department records as required and assist in creating & maintaining accurate working instructions.

• 

  Electri-Care

  • Managing Member

    • Sep 2007 - Oct 2013

    Overseeing all departments of the company, Business marketing, sales and development, Technical areas, Health & Safety, Tendering and Costing, Skills development, Project management etc.

• 

  Calsonic

  • Port Elizabeth Area, South Africa

  • Maintenance Supervisor

    • Jun 2005 - Dec 2007
    • Port Elizabeth Area, South Africa

    Responsible for the entire plant maintenance and machinery, being the only electrician on site, over seeing the mechanical fitters and setters, over seeing the tool making contractors. In charge of the plants security. Acting engineering manager, reporting to the Managing Director.

• 

  Faurecia

  • Electrical Technician

    • Jun 2002 - Jun 2005

    As shift electrician I was responsible for the plant machinery in an production environment. Responsible for the machinery and plant Health & Safety division. Part of the Kaizen group responsible for systems improvements in the factory layouts and productivity of the lines. Reporting to the Managing Director, later the company appointed an Engineering Manager.

• 

  Dana Holding Corporation

  • Uitenhage Area, South Africa

  • Electrician

    • Jun 1996 - Jun 2002
    • Uitenhage Area, South Africa

    4 year RED SEAL apprenticeship - passed with distinction. Worked for 2 years as qualified electrician in the plant after I completed my trade test.