Experience

• 

  Taweelah Asia Power Company (TAPCO)

  • Utilities
  • 100 - 200 Employee

  • Senior Operation Engineer

    • May 2007 - Present

    Mechanical Engineer, • As Central Control Room Operation Engineer at Al —Taweelah Power Company The phase "IB",Imtial B consists of six steam power units. The steam turbine of the first six units Boiler manufactured by Babcook has capacity of 150 MW when the ABB turbine working on condensing mode, but when the unit operates on Extraction Mode to feed Desalination unit (12.5 MIGD) its capacity is 131 MW The operations of Power and Desalination units through Human Interface System (HMI). The Phase "IBE" is Combined Cycle consists of two gas turbines and one steam turbine The gas turbine is Frame 9 operated through Mark 5 has capacity of 110 MW and the steam turbine capacity of 147 MW, there are two Heat Recover Steam Generators (HRSG), each receives the exhaust of its own gas turbine in addition to duct burners to produce the required steam for the steam turbine and three desalination units of capacity 7.5 MIGD each.New B Extention, SIEMENS 3xSGT5 4000 Gross Output/Unit 237 MW at RSC Back Pressure Steam Turbine Gross Steam Output 330 MW• Doing start- up for power units from cold, warm and hot conditions this includes boiler, turbine and the generator taking into consideration the technical basis, also doing shutdown for the power unit as request of Load Dispatch Centre.• Keeping the units running safely according to technical basis during normal and emergency conditions.• Keeping the generator and step-up transformer parameters during normal and emergency operation within operating limits.• Implementing all the isolation for any equipment from control room and supervise local isolation work for permit to work.• Issuing work requests for units problems to all maintenance sections mechanical, electrical and instrumentation/control through maximo program.• Perform also as HSE Engineer with the responsibility of ensuring the safety and security of the unit.

  • HSE Engineer

    • Feb 2007 - Sep 2007

    Doing safety tour and follow up results, emergancy evacuation plan, install safety signs and other saftey equipment like breathing apparatus, doing the monthly safety reports includes, prepare and coordinate for safety training.

• 

  Process Milan, Italy

  • UAE

  • Inspector

    • Jan 2005 - Apr 2013
    • UAE

    Since 2005 to dateActing as Mechanical shop inspection engineer at UAE area. Recent assignment for inspection of Main materials are :- 10 km length of Galvanized + PVC coated chainlink Fencing system at Link Middle East , Dubai (UAE) for Waha Oil Co. , Libya (2010)- Deaerators at Perfect International Sharjah ( UAE) for Shoaiba Steam Power Plant III, on behalf of Saudi Electricity Co , Jeddah (2011)- Evaporator , Pre-heaters and Condenser at Quality International Corp., Sharjah (UAE) for Shoaiba Steam Power Plant III, on behalf of Saudi Electricity Co , Jeddah (2011).- Steam Transformer (Tube & Shell Sides) Units I and II at Quality International Corp., Sharjah (UAE) for Shoaiba Steam Power Plant III, on behalf of Saudi Electricity Co , Jeddah (2011)- Piping Materials (valves . Fittings – tubing) at Econosto Mideast, Dubai for Veba Oil Operations , Libya (2008 – 2010)Ball Valves Fire Safe to API RP-6FA. rating 600# to 3000#, size 6” to 18” , size 32” (motorized) as per BS 5351 / ASME B16.34.Trunnion mounted Ball Valves 8”, 1500#Check Valves, rating 600#, size 2” to 6” to API 6DGlobe Valves full bore RTJ ends, fire safe to API RP-6FA, ASME B16.34, Gear Operated, 1500# various sizes- PVC Thickwalled Casings at National Plastics Sharjah (UAE) for Waha Oil Co, Libya (2007)- Vertical Degassing Boot at Fabtech International , Dubai for Veba Oil Operation, Libya- KO drums & Filter Separator Vessels at Gulf Steel, Jubail for Oil and Gas Systems Ltd.

• 

  ABB

  • Altaweelah, Abu Dhabi, UAE

  • Site & Commissioning Operation Engineer

    • Jan 1994 - Feb 1997
    • Altaweelah, Abu Dhabi, UAE

    Boiler site construction supervision.Boiler commissioning & operation• Supervised the site with 120 workers involved in the installation of 6 boilers 150 MW each as rotating equipment, soot blowers, ductwork and auxiliary piping.• Served as Team Leader of Punch List Work; finished mechanical work and fire fighting HVAC.• Coordinated mechanical, electrical and civil engineering areas and ensured the proper performance.• Commissioned and started up the rotating equipments, pipelines, boiler and turbine and further arrange the chemical cleaning of same.

• 

  Mitsubishi Heavy Industries

  • Mitsubishi, Assiut, Egypt, 2 UNITS of 320 MW

  • Site & Commissioning Engineer

    • Jan 1990 - 1991
    • Mitsubishi, Assiut, Egypt, 2 UNITS of 320 MW

    •As a piping engineer, supervised site installation of the pipelines, high pressure piping system and gas piping.• Managed the preparation and arrangement of required materials such as pipes, valves and fittings as per technical specification for the site.