I/C Technician

• May 2021 - Present

Instrument & Controls TestingDCS cutovers, Perform Loop checks, function checks, & Trouble shoot loops. Instrument & Controls TestingDCS cutovers, Perform Loop checks, function checks, & Trouble shoot loops.

I/C Technician

• Feb 2021 - Apr 2021

Instrument & Controls Testing Perform Loop checks, & function checks,Trouble shoot loops and repairs as needed, Instrument & Controls Testing Perform Loop checks, & function checks,Trouble shoot loops and repairs as needed,

Senior Instrument Technician

• Nov 2020 - Feb 2021

I&C Technician / Automation Technician

• Jan 2020 - Sep 2020

I&C Technician

• May 2019 - Nov 2019

Work on Instrumentation & commissioning.Perform Loop checks & function checks,Trouble shoot loops and repairs as needed,assist on Instrument Inspections QA - on Valves,Level/ pressure switches, Transmitters, gas detector. Work on Instrumentation & commissioning.Perform Loop checks & function checks,Trouble shoot loops and repairs as needed,assist on Instrument Inspections QA - on Valves,Level/ pressure switches, Transmitters, gas detector.

I/C Tech

• Nov 2018 - May 2019

Perform I/O check out for DCS and PLC-SIScheck wireing, verify points ready for loop checksverify and view process values EU scaled on DCS, Honeywell Experion Automation support, make sure loop is good before loop testing. Perform I/O check out for DCS and PLC-SIScheck wireing, verify points ready for loop checksverify and view process values EU scaled on DCS, Honeywell Experion Automation support, make sure loop is good before loop testing.

I/E&C Technician/ Automation Technician

• Jul 2015 - Nov 2018

Currently part of a highly experienced Team.......SIS testing, Loop checks, procedure testing withAutomation " PLC Triconex & DCS Honeywell "- Performing Instrument, Electrical & Controls QC Inspections and P&ID walk downs,Providing support and assisting process operationfacilities on their maintenance & testing, prof test and validations on their safety operating control systems (SIS), Instrument Loop checks,We provide to our client's unit SIS test procedures to verify safety controls, Alarms, Interlocks, andSIS systems, providing service on Automation- PLC. (Triconex) & DCS.

I/E&C Technician /I&E QA Inspector

• Jul 2015 - Oct 2015

Perform Quality Control inspections & verification of Instrument, Electrical and Controls installationswalk down package to inspect control devices such as valves and transmitters verify direction for flow, verify orifice plate direction, Inspect impulse lines Hi/Loverify function of I/P or I/I transducers, Inspect proper metallurgic connections to instrument devices,verify proper conduit size, check and inspect wire terminations, check for proper tagging,verify I/O point in control cabinets to DCS & PLC. etc....perform Instrument loop checks, function test cause and affect.

Senior Instrument Technician

• Nov 2015 - Dec 2015

Perform Commissioning and start up for gas plantcheck/verify instrument calibrations, function test SIS devices for S/Dset up flow turbine meters on in-port/exports skids,set up calibration on radar level transmitters on vessels and storage tanksstart up support. Perform Commissioning and start up for gas plantcheck/verify instrument calibrations, function test SIS devices for S/Dset up flow turbine meters on in-port/exports skids,set up calibration on radar level transmitters on vessels and storage tanksstart up support.

Senior Instrument Technician

• May 2015 - Jul 2015

Review & verify installation of Instruments - model, type, range etc.. per specs.and detailsCheck & verify points to I/O cards, Calibrate Instruments, Loop checksWalk down packages review Loop drawings & P&ID drawings Perform verification on systems for cause & affect Assist on Commissioning & start up. Review & verify installation of Instruments - model, type, range etc.. per specs.and detailsCheck & verify points to I/O cards, Calibrate Instruments, Loop checksWalk down packages review Loop drawings & P&ID drawings Perform verification on systems for cause & affect Assist on Commissioning & start up.

I/E Designer

• Sep 2014 - May 2015

Quality & Excellence E&C Firm Designing Electrical and Instrument drawings for Natural Gas Industries,Performing voltage calculations, use AutoCAD to prepare power & Instrument location plans, Design grounding and cable tray layout, one lines, wiring diagrams for MCC, J-Box, PLC, DCS,Use of Navis Works, CAD Works and Microsoft OL.Create conduit and cable schedules using Excel spread sheet, work with Engineers on preparing deliverables for review and issuing to construction. Quality & Excellence E&C Firm Designing Electrical and Instrument drawings for Natural Gas Industries,Performing voltage calculations, use AutoCAD to prepare power & Instrument location plans, Design grounding and cable tray layout, one lines, wiring diagrams for MCC, J-Box, PLC, DCS,Use of Navis Works, CAD Works and Microsoft OL.Create conduit and cable schedules using Excel spread sheet, work with Engineers on preparing deliverables for review and issuing to construction.

Electrical Designer | I&E Coordinator

• Aug 2013 - Sep 2014

ExxonMobil - BOP & MBPP - NA grouth projectWork with client reviewing packages, Work with engineering assist in Design/Draft using AutoCad to prepare drawings for deliverables, Coordinate I&E work to subcontractor, perform I&E Inspections for turn over packages, Involved in schedule & progress meetings, use of excel, prepare RFI's & FDN's for approval.

Electrical Designer

• Apr 2013 - Aug 2013

Working on electrical upgrade and modernization project at Motiva PA TX, Walk downs, Designing & Drafting using AutoCAD one line Dwg's. of power distribution lines, Create spread sheet using Microsoft excel and preparing deliverables for client to use as project estimate and cost.

Instrument commissioning Technician

• Dec 2012 - Apr 2013

Commission Instruments on Delta-V systems for unit start-up, Instrument system check out, Calibrations and loop checks, Perform inspections and package walk downs review drawings to verify proper wiring and tagging equipment and devices, procedure testing cause and affect, fill out calibration documents for client. Commission Instruments on Delta-V systems for unit start-up, Instrument system check out, Calibrations and loop checks, Perform inspections and package walk downs review drawings to verify proper wiring and tagging equipment and devices, procedure testing cause and affect, fill out calibration documents for client.

I&E Technician

• Apr 2012 - Sep 2012

Perform loop checks and calibrations on Instruments, transmitters and valves, verify connections on triconex safety system cabinets, PLC's and DCS, Verify Instrument taging and connections, Perform testing, cause and affects for Commissioning. Perform loop checks and calibrations on Instruments, transmitters and valves, verify connections on triconex safety system cabinets, PLC's and DCS, Verify Instrument taging and connections, Perform testing, cause and affects for Commissioning.

Instrument Technician

• Mar 2012 - Apr 2012

Perform calibrations on valves and transmitters,Trouble shooting, Review drawings like wire sckematics and P&ID's, Testing devices shoot and verify loops to DCS, Commisioning and start up support. Perform calibrations on valves and transmitters,Trouble shooting, Review drawings like wire sckematics and P&ID's, Testing devices shoot and verify loops to DCS, Commisioning and start up support.

Field Engineer - Process marking & labeling

• Nov 2011 - Mar 2012

Walk down units CEP/Expansion project @ Motiva Port Aurther,Tx.P&ID walk downs for material list Process lables and markings . Walk down units CEP/Expansion project @ Motiva Port Aurther,Tx.P&ID walk downs for material list Process lables and markings .

Instrument Technician

• Sep 2008 - Nov 2011

Work on various projects/ sites for oil and petrol chemical. revamps, shut downs, T/A up grades, expansions & new construction. walk down packages, perform instrument calibration on transmitters and valves, Trouble shoot & perform loop checks for commissioning and unit start up. Work on various projects/ sites for oil and petrol chemical. revamps, shut downs, T/A up grades, expansions & new construction. walk down packages, perform instrument calibration on transmitters and valves, Trouble shoot & perform loop checks for commissioning and unit start up.

Electrical Supervisor

• Jan 2008 - Sep 2008

Supervise an electrical crew guide and verify the electrical installations and wire connections,Review I&E drawings, follow Engineer specs, turn in production and quality reports, maintain and follow construction schedule, prepare electrical material list and submit to request for P.O.'s Supervise an electrical crew guide and verify the electrical installations and wire connections,Review I&E drawings, follow Engineer specs, turn in production and quality reports, maintain and follow construction schedule, prepare electrical material list and submit to request for P.O.'s

I&E Tech

• Sep 2006 - Jan 2008

Perform I/O terminations in DCS rack room, perform Instrument calibrations and loop checkswork on Instruments and controls. Perform I/O terminations in DCS rack room, perform Instrument calibrations and loop checkswork on Instruments and controls.

Telecommunications Technician

• May 2005 - Sep 2006

Perform walk downs and surveys for equipment on cell sites for equipment growth,verify sufficient space and capacity for new proposed communication equipment (GSM)make installations and connections to new equipment like... Cat 5 wire, coax connections, power connections to DC power panel, perform and satisfy T 1 testing with main switch hub. Perform walk downs and surveys for equipment on cell sites for equipment growth,verify sufficient space and capacity for new proposed communication equipment (GSM)make installations and connections to new equipment like... Cat 5 wire, coax connections, power connections to DC power panel, perform and satisfy T 1 testing with main switch hub.

Electrical Specialist

• Jan 2004 - Apr 2005

Perform electrical installations and Commissioning...MCC wire terminations for motors and pumpsPerform electrical testing on switch gears and motors, bump- run and check verify correct motor rotationTest trip reset. Perform electrical installations and Commissioning...MCC wire terminations for motors and pumpsPerform electrical testing on switch gears and motors, bump- run and check verify correct motor rotationTest trip reset.