Experience

Bradley Construction Management

• United States
• Construction
• 1 - 100 Employee

• Construction Manager

  • Jan 2023 - Present



Consumer Energy MI

• Michigan, United States

• Construction Manager

  • Apr 2021 - Sep 2022

  EI&C, Mechanical, Civil, Oversite of Inspection, FAT/PSSR/Commissioning, drawing reviews, P&ID's, ISO's, Site Walkdowns, RFI/Change Orders, Environmental, tracking cost, time & Materials, verifying proper permitting is in place, Standards, API, NEC, SCADA/Automation, Cathodic's, Coordinating with Engineering, Coordinating & Tracking vendor progress. EI&C, Mechanical, Civil, Oversite of Inspection, FAT/PSSR/Commissioning, drawing reviews, P&ID's, ISO's, Site Walkdowns, RFI/Change Orders, Environmental, tracking cost, time & Materials, verifying proper permitting is in place, Standards, API, NEC, SCADA/Automation, Cathodic's, Coordinating with Engineering, Coordinating & Tracking vendor progress.



Airswift

• United States
• Staffing and Recruiting
• 700 & Above Employee

• Lead Electrical Construction Specialist

  • Feb 2017 - Apr 2021



Epcon

• United States
• Oil and Gas
• 1 - 100 Employee

• Electrical Inspection

  • Jul 2016 - Nov 2016

  Sole E&I Inspector for Oneok Future Site Compressor Station Build. Preforming oversite for all site electrical and grounding as per NEC. Monitoring and providing direction for two electrical contractor on location doing site build up. This is a small compressor station with 2 gas turbines being installed. I verify contractors are following Engineered Electrical & Grounding drawings and that all work conforms to the NEC. I monitor site material, contractor hours and equipment charges on all T&M work. I attend all safety and JSA meeting daily to verify that they are performed in a profession manor. I assure that all work is completed safely and timely. Show less



Double M Inspection

• Odessa/Midland, Texas Area

• Sr E&I Inspector

  • May 2015 - Jun 2016

  Lead E&I Inspector for Vitol Energy’s. I preformed oversite on new construction projects in the Crud Oil industry. I have been Sr E&I Inspector on 9 Pump Stations, 3 Truck Stations, 1 Tank Station along with misc related smaller projects. I have been tasked with preforming oversite for electrical and instrumentation construction for these projects. Also preforming oversite on site primary power installs, overhead utility feeder lines from utility services providers (25 kva – 1500 kva)(480 vac - 4160 vac).I have had to verify accuracy of drawing, materials list, construction personnel’s qualification, keep up with job books and safety related paperwork ie, JSA”s, safe work permits, hot work permits, one calls and excavation permits. Verify calibrations on gas meters and various electrical meters used for construction purposes. I have been required to performed electrical audits on existing pump and truck stations for Vitol and provided them with an itemized list of corrective action for any issues noted during the walk through. Show less



Energy Inspection Services

• United States
• Oil and Gas
• 100 - 200 Employee

• Lead I&E QA Coordinator

  • Mar 2015 - May 2015

  Electrical and Instrumentation Inspection For P66 Project in Sweeny Tx. Electrical and Instrumentation Inspection For P66 Project in Sweeny Tx.



Applied Consultants

• Oil and Gas
• 300 - 400 Employee

• Sr Lead E&I Inspector

  • Oct 2013 - Mar 2015

  Currently doing in house Electrical Audits for Chesapeake's SWD's and Productions Sites in Northern OK. Taking pictures of issues needing correction, Labeling those pictures to match up with the Write up. So a Scope Of Work can be created for a contractor to follow up with corrective actions related to the Audit. Then doing a follow up walk through to verify all noted issues were corrected. We are also scoping out and doing injection pump installs on SWD sites. Currently doing in house Electrical Audits for Chesapeake's SWD's and Productions Sites in Northern OK. Taking pictures of issues needing correction, Labeling those pictures to match up with the Write up. So a Scope Of Work can be created for a contractor to follow up with corrective actions related to the Audit. Then doing a follow up walk through to verify all noted issues were corrected. We are also scoping out and doing injection pump installs on SWD sites.



MBF Inspection

• Hobbs New Mexico

• Sr. Project I & E Inspector

  • Apr 2013 - Oct 2013

  Work locations were in the Loco Hills New Mexico for AKA Energy's as the Projects Lead I & E inspector. We are construction a new 6 unit Station along with upgrades on 4 existing Stations. This will be followed by a PH2 and PH3 at their main gas processing facility for this area. My job includes but is not linited to, Direction of the contractor to follow drawings and code for this job. Making changes to the drawing as work dictates and issuing the required change orders. Making sure I have the right people for the job and assuring they do the job in the most cost effective way while not deviating from the requirments established be the NEC. Above all else making sure the job is do safely. Show less



QIS

• EL RENO, OK CANA PLANT (COMPLETED CONTRACT)

• I & E INSPECTOR

  • Feb 2013 - Apr 2013

  I & E Inspector at Devon CANA Plant working on the PH2 Expansion. Monitoring installation of all electrical and Instrumentation Systems. Some of these systems were Cryo and Cryo support, Air Compressor Units, PLC and SCADA Systems, Natural Gas Engine Compressors, Gas Turbine Compressors, Plant Lighting, Emergency Systems, Heat Trace, Insulation, Conduit Run’s and Reclamation & Regeneration Systems. All Work Held to NEC Code and Spec’s. I & E Inspector at Devon CANA Plant working on the PH2 Expansion. Monitoring installation of all electrical and Instrumentation Systems. Some of these systems were Cryo and Cryo support, Air Compressor Units, PLC and SCADA Systems, Natural Gas Engine Compressors, Gas Turbine Compressors, Plant Lighting, Emergency Systems, Heat Trace, Insulation, Conduit Run’s and Reclamation & Regeneration Systems. All Work Held to NEC Code and Spec’s.



T.J. INSPECTION

• LINDSAY, OK (ENOGEX) CONTRACT

• INSPECTOR

  • Nov 2012 - Feb 2013

  Inspector Working for Enogex Job. Worked on construction of the Lindsay and Foster Station,a 9 mile 12” line and 11 mile 16” line, along with tie-in, Pig Traps & Launcher installation’s. Inspection on Right Of Way, Stringing, Bending, Coating’s, Tie-ins, X-Ray, Line Locates, Boring, Lowering In, Back Fill, Clean Up and reclamation. Station work installation work. I have been to several courses while working for this company. E05 - Perform Non-Destructive Tests on Steel Welds, I07 - Inspecting for External Corrosion and Inspecting, M08 - Preventing Accidental Ignition, M16 - Recognize and React to Generic Abnormal Operating, Show less



SMITH POWER SYSTEMS

• SALT LAKE CITY, UT (CONTRACT)

• FIELD SERVICE ELECTRICAL SPEC

  • Mar 2011 - Nov 2012

  Field Service Spec. New installation and New Commissioning to GE Spec’s. Installation, trouble shooting and repair on SCADA, PLC, Control systems and various power systems. I Certified on Jenbacker power Generation systems by GE Jenbacker in Austria. I was involved with all aspects on these units from new installation and commissioning to R&D and Trouble shooting and repair. I assured that the safety protocols were followed on all jobs. Field Service Spec. New installation and New Commissioning to GE Spec’s. Installation, trouble shooting and repair on SCADA, PLC, Control systems and various power systems. I Certified on Jenbacker power Generation systems by GE Jenbacker in Austria. I was involved with all aspects on these units from new installation and commissioning to R&D and Trouble shooting and repair. I assured that the safety protocols were followed on all jobs.



R & J TECH

• WILLISTON, ND (CONTRACT JOB)

• SR I & E FIELD TECH FOR DRILLING INDUSTRY

  • Jan 2010 - Jul 2011

  SR I&E Field Tech for Drilling Industry . Trouble Shooting and repair for all electrical aspects of Drilling Rig. SCR’s (IE Ross Hill, Baylor,), VFD’s (IE Ross Hill, IDM, Flex Rig), Power Generation (Cat, Onan, Detroit, Baylor, MQ, up through 2 Meg), Control Systems (low voltage through 4160), PLC’s (A/B, Semen’s), Top Drives (Varco, Canrig, TDS). Baylor Braking systems, Hydraulics’. Lighting, Power Transformers/Filters, AC/DC motors up through 2000HP. Final Electrical Inspections on Compressors and Pump Jack in ND area. Show less



HOUMA ARMATURE WORKS

• HOUMA, LA, (CONTRACT)

• FIELD SERVICE ELECTRICAL SPEC

  • Aug 2010 - Feb 2011

  Field Service Electrical Tech. I Performed Electrical trouble shooting and repair work on various types of equipment in the Gulf of Mexico and overseas. Offshore Platforms, Drilling Rigs, Inland Barges and Ships/Boats. T/R on electrical control systems, AC/DC Drive systems, Top Drive Systems, AC/DC Motors and Power Generation Systems. Determine what was needed then Build and Install new Electrical Enclosures and Systems that are rated for the environment they are in. Inspected all new installations Show less



NOMAC DRILLING

• EAST TEXAS

• SR FIELD ELECTRICAL

  • Sep 2008 - Dec 2009

  Sr. Field Electrical for 30 Plus Drilling Rig’s/Power Generation Equipment. I maintained and repaired all electrical systems that can be found relating to drilling rigs, as well as the new installation of electrical control and machinery. I understand the importance of keeping down time to a minimum and doing a professional job the first time around. I have experience with SCR, VFD and diesel electric rigs, SCADA and controls. I Preformed HV connections of drilling rig power systems to main power grids in areas that diesel engines were not operated because of noise or emissions. Performed monthly and annual Electrical Inspections on all electrical Show less



United States Department of Defense

• United States
• Armed Forces
• 700 & Above Employee

• FIELD LEAD

  • Jan 2009 - Nov 2009

  Field Lead. Provided Electrical, Mechanical and admin support for over 200 portable and stationary power generation unit in country. Units ranged from 20 KW to 2 MEG. Preformed all Installations, Preventive Maint, Trouble Shooting of electrical and mechanical problems, and repairs. Supervised 10 Technician, responsible for their performance, evaluations, and all D.O.D. safety surveys related to contact. Completed contract. Field Lead. Provided Electrical, Mechanical and admin support for over 200 portable and stationary power generation unit in country. Units ranged from 20 KW to 2 MEG. Preformed all Installations, Preventive Maint, Trouble Shooting of electrical and mechanical problems, and repairs. Supervised 10 Technician, responsible for their performance, evaluations, and all D.O.D. safety surveys related to contact. Completed contract.



EXTERRAN/ENERVEN WORLD WIDE ENERGY

• TEXAS

• SR I & E FIELD TECH

  • Jun 2007 - Sep 2008

  Sr I&E Field Tech for Next Generation Duel Drive Gas Compressor Systems. I maintained and repaired all electrical and electronic systems on these units. I also maintained all backup power systems and SCADA on these units. Preformed basic programming for PLC’s and control system RS Logic. I perform mechanical repairs when necessary. Performed new installation and upgrades of outdated systems. Involved in the RESEARCH AND DEVELOPMENT on new sites and new units. Maintained, serviced and replaced main drive motors 4160 VAC, 1500 HP plus the repair and maintenance of the VF Drives for these motors. I/T/R of Hydraulic systems and controls. AC/DC motors and controls up 480 VAC and 500 HP for backup power systems. I Keep detailed records on all repairs and upgrades. Supervised all contractor work related to the units under my charge. I Performed safety meetings and keep record of all JSA’s on file. I/T/R of 1500 HP Natural Gas Engines. Responsible for all MCC equipment, SCADA systems, Electronics, Electrical systems, alignments of engines, compressors and motors. I assured that all standards were followed and performed the finial inspections before units went on line. Show less



Recyclage Granutech

• Canada
• Renewable Energy Semiconductor Manufacturing
• 1 - 100 Employee

• COMMISSIONING TECH

  • Jan 2007 - Jun 2007

  Installation of new recycling equipment. Responsible for all aspects of electrical, electronic, mechanical, and SCR and VF Drives. Position required stateside and overseas travel. Charged with training all new operators and mechanics on equipment, coordinating downtime, repairs and supplies for field equipment. Preformed Basic programming for all safety devices motor controls and drives (Allen Bradley RS Logic). Worked with Research and Development for new units and for the upgrade of old systems. I/T/R of hydraulics and control systems, motors and control systems up through 600 Volts and 500HP Show less



United States Department of Defense

• United States
• Armed Forces
• 700 & Above Employee

• MASTER POWER GENERATION SPEC

  • Oct 2006 - Jun 2007

  Master Power Generation Specialist overseas in Kuwait and Iraq. Worker as lead person with a 8 man crew. Maintained 150, 20 to 2000 KW units. I was responsible for all aspects of the operations, troubleshooting problems, new installations, ordering parts, keeping parts in stock, coordinating all downtime with DOD personal, and handled all electrical, mechanical and electronic issues. Maintained all switch Gear, Transformers both step down and constant voltage. Maintained JSA program for my team, preformed daily, weekly and monthly safety meetings along with keeping all MSDS information up to date and on file. Show less



GUILD ELECTRICAL POWER SYSTEMS

• SOUTH CENTRAL US (COMPANY LOST CONTRACT)

• FIELD SUPERVISOR ELECTRICAL

  • May 2005 - Oct 2006

  Emergency Response Team—Field supervision of emergency response for cellular communication systems following Hurricanes Katrina and Rita. Directed maintenance and repair of 300 plus portable and stationary generators across Texas, Louisiana, and Mississippi. This included units that had been flooded and were in very bad condition and required major overhaul and complete engine rebuild along with annually load banking units. Returned to North Texas are and initiated maintenance and repair procedures for emergency power systems ranging in size from 25-1500 KW. Duties included complete annual inspections, emergency repair and preventive maintenance for all AT&T cell sites across north Texas. Show less



MID SOUTH POWER

• TEXAS

• POWER GENERATION SPEC

  • Apr 2004 - May 2005

  Field Service, Repair and maintenance of 20KW-750 KW portable power generation systems. Maintained fleet of approximately 50 portable generators plus field service for several Oil Field Drilling Co. Established maintenance records and parts acquisition procedures for MidSouth. Primary type of units worked on was Cats. Preformed all repairs on these units, electrical and mechanical, load banking and complete engine overhauls. Field Service, Repair and maintenance of 20KW-750 KW portable power generation systems. Maintained fleet of approximately 50 portable generators plus field service for several Oil Field Drilling Co. Established maintenance records and parts acquisition procedures for MidSouth. Primary type of units worked on was Cats. Preformed all repairs on these units, electrical and mechanical, load banking and complete engine overhauls.



United States Department of Defense

• United States
• Armed Forces
• 700 & Above Employee

• FIELD SERVICE ELECTRICAL

  • Mar 2003 - Apr 2004

  Field Service Technician—Airfield electrical repair, installations setup and repair of various electrical and electronic devices. Base emergency lighting, fire prevention systems, aircraft incident emergency response team. Field Service Technician—Airfield electrical repair, installations setup and repair of various electrical and electronic devices. Base emergency lighting, fire prevention systems, aircraft incident emergency response team.



PMC, USAF CONTRACTOR

• SHYEMA, ALASKA (CONTRACT

• FIELD SERVICE MAINT

  • Apr 2000 - Mar 2001

  Field Service Maintenance—Troubleshoot and repair of airfield high-voltage electrical systems, generator and power systems, emergency lighting, fire-prevention systems, boilers, facility repairs, installation of new equipment, metal fabrication, operation and repair of heavy construction equipment, and assigned to incident emergency response team. Field Service Maintenance—Troubleshoot and repair of airfield high-voltage electrical systems, generator and power systems, emergency lighting, fire-prevention systems, boilers, facility repairs, installation of new equipment, metal fabrication, operation and repair of heavy construction equipment, and assigned to incident emergency response team.



United States Department of Defense

• United States
• Armed Forces
• 700 & Above Employee

• CONTRACTOR

  • Dec 1996 - Apr 2000

  CONTRACTOR Performed overseas movement and security for D.O.D. and Private organizations. Deployment and Installation of specialized equipment in various locations around world. More information available upon request CONTRACTOR Performed overseas movement and security for D.O.D. and Private organizations. Deployment and Installation of specialized equipment in various locations around world. More information available upon request



US Army

• United States
• Armed Forces
• 700 & Above Employee

• SOLDIER

  • Jun 1985 - Dec 1998

  Special Operations Enlisted Qualification Course, Mobile Combat Trainer, Leadership and Development Schools, Specialized Electrical, Electronic courses, COOL School, SCER School, International Weapons Permit, EOD Certified, Load Master Certified, Overseas Travel and Security training. Current Military CAC Card for Working in Middle East. Current US Passport, Advanced Communication and Computer Skills, CQCT, Instructor PPCT, SERE Course, MOS: 18 Series, 11B30, 11M30, 62E10, and 93P20. Special Operations Enlisted Qualification Course, Mobile Combat Trainer, Leadership and Development Schools, Specialized Electrical, Electronic courses, COOL School, SCER School, International Weapons Permit, EOD Certified, Load Master Certified, Overseas Travel and Security training. Current Military CAC Card for Working in Middle East. Current US Passport, Advanced Communication and Computer Skills, CQCT, Instructor PPCT, SERE Course, MOS: 18 Series, 11B30, 11M30, 62E10, and 93P20.