Quality Manager

• Aug 2023 - Present

Enefit Power As, Condensation Unit Enefit Power As, Condensation Unit

Senior Quality Assurance Quality Control Engineer

• Aug 2022 - Aug 2023

NORTHVOLT GIGAFACTORY PROJECT NORTHVOLT GIGAFACTORY PROJECT

Quality Assurance Quality Control Engineer

• Jun 2019 - Aug 2022

• Utilize appropriate processes for the effective resolution of internal product quality issues. • Contribute to the development and improvement of systems, processes and procedures to support these key responsibilities. • Closely monitor quality records for general compliance, completeness and correctness. • Participate in planning and conducting the understanding phase as a part of preparing the risk assessment plan through interviews, questionnaires, process mapping, and data… Show more • Utilize appropriate processes for the effective resolution of internal product quality issues. • Contribute to the development and improvement of systems, processes and procedures to support these key responsibilities. • Closely monitor quality records for general compliance, completeness and correctness. • Participate in planning and conducting the understanding phase as a part of preparing the risk assessment plan through interviews, questionnaires, process mapping, and data analysis. • Prepare the list of initial requirements and develop an audit plan for the selected scope. • Develop audit programs that reasonably covers the controls and risks within the scope. • Independently conduct audit fieldwork including onsite observations, interviews with management and staff personnel, analytical procedures, and detailed analysis and testing of data. • • Prepare audit reports with supportive evidence to ensure client understanding of the audit decision. • Utilize appropriate processes for the effective resolution of internal product quality issues. • Conduct understanding & walkthrough meetings with process owners. Show less • Utilize appropriate processes for the effective resolution of internal product quality issues. • Contribute to the development and improvement of systems, processes and procedures to support these key responsibilities. • Closely monitor quality records for general compliance, completeness and correctness. • Participate in planning and conducting the understanding phase as a part of preparing the risk assessment plan through interviews, questionnaires, process mapping, and data… Show more • Utilize appropriate processes for the effective resolution of internal product quality issues. • Contribute to the development and improvement of systems, processes and procedures to support these key responsibilities. • Closely monitor quality records for general compliance, completeness and correctness. • Participate in planning and conducting the understanding phase as a part of preparing the risk assessment plan through interviews, questionnaires, process mapping, and data analysis. • Prepare the list of initial requirements and develop an audit plan for the selected scope. • Develop audit programs that reasonably covers the controls and risks within the scope. • Independently conduct audit fieldwork including onsite observations, interviews with management and staff personnel, analytical procedures, and detailed analysis and testing of data. • • Prepare audit reports with supportive evidence to ensure client understanding of the audit decision. • Utilize appropriate processes for the effective resolution of internal product quality issues. • Conduct understanding & walkthrough meetings with process owners. Show less

QA/QC Inspector

• Jun 2017 - Jun 2019

Key Responsibilities and Achievements • Responsible for welding activities during prefabrication/fabrication stage, structures and equipments installation on site, subcontractor supervision. • Participate at Factory Acceptance Test (FAT) for the end customer, in Finland and Sweden (Factories: ABB, Sulzer Pumps, Atlas Copco, Siemens). • Ensure correct installation of the equipments according to the project specifications and applicable international standards and codes for… Show more Key Responsibilities and Achievements • Responsible for welding activities during prefabrication/fabrication stage, structures and equipments installation on site, subcontractor supervision. • Participate at Factory Acceptance Test (FAT) for the end customer, in Finland and Sweden (Factories: ABB, Sulzer Pumps, Atlas Copco, Siemens). • Ensure correct installation of the equipments according to the project specifications and applicable international standards and codes for piping and pressure equipment. • Prepare weekly welding performance record. • Perform visual inspection of the spare parts and piping components before site installation. • Create and record NCR’s, recommend repair procedure. • Review Installation Procedures, Inspection and Test Plan, WPQR and WPS (welding) issued by the subcontractors. • Controlling & monitoring the work performance of subcontractors, taking corrective action where necessary, to solve the deviations early. • Control the correct storage and distribution of filler material. Carry out inspection, surveillance witnessing/hold of subcontractor’s activities. • Check and record material certificates, dimensional control reports, NDE reports, welder qualifications, NDE qualifications, WPS/WPQR from subcontractors. Show less Key Responsibilities and Achievements • Responsible for welding activities during prefabrication/fabrication stage, structures and equipments installation on site, subcontractor supervision. • Participate at Factory Acceptance Test (FAT) for the end customer, in Finland and Sweden (Factories: ABB, Sulzer Pumps, Atlas Copco, Siemens). • Ensure correct installation of the equipments according to the project specifications and applicable international standards and codes for… Show more Key Responsibilities and Achievements • Responsible for welding activities during prefabrication/fabrication stage, structures and equipments installation on site, subcontractor supervision. • Participate at Factory Acceptance Test (FAT) for the end customer, in Finland and Sweden (Factories: ABB, Sulzer Pumps, Atlas Copco, Siemens). • Ensure correct installation of the equipments according to the project specifications and applicable international standards and codes for piping and pressure equipment. • Prepare weekly welding performance record. • Perform visual inspection of the spare parts and piping components before site installation. • Create and record NCR’s, recommend repair procedure. • Review Installation Procedures, Inspection and Test Plan, WPQR and WPS (welding) issued by the subcontractors. • Controlling & monitoring the work performance of subcontractors, taking corrective action where necessary, to solve the deviations early. • Control the correct storage and distribution of filler material. Carry out inspection, surveillance witnessing/hold of subcontractor’s activities. • Check and record material certificates, dimensional control reports, NDE reports, welder qualifications, NDE qualifications, WPS/WPQR from subcontractors. Show less

Site Mechanical Engineer

• Nov 2014 - Apr 2017

Projects involved: • July - December 2016, Barzan Onshore Project • May - July 2016, Qatar Petrochemical Company QAPCO • February - May 2016, Barzan Onshore Project • November - February 2015 - 2016, Dolphin Energy Shutdown • November - May 2014 - 2015, Qatar Petroleum Turnaround • Responsible for Planning & execution of all the activities on site. Preworks preperation, manpower and material supply, equipment tools and consumables; • Coordinate the shop fabrication of… Show more Projects involved: • July - December 2016, Barzan Onshore Project • May - July 2016, Qatar Petrochemical Company QAPCO • February - May 2016, Barzan Onshore Project • November - February 2015 - 2016, Dolphin Energy Shutdown • November - May 2014 - 2015, Qatar Petroleum Turnaround • Responsible for Planning & execution of all the activities on site. Preworks preperation, manpower and material supply, equipment tools and consumables; • Coordinate the shop fabrication of piping spools and steel structure supports, according to the approved for construction drawings supplied by the vendor; • Studying and reviewing supplied P&ID, highlighting discrepancies and recommending corrective measures to be taken after site surveys; • Prepare the hydro-test procedure, ensure instruments are calibrated with valid certificate; • Prepare the method statements for piping, pressure vessels, heat exchangers, tanks in accordance with API; • Monitor and control the subcontractors daily progress, provide assistance when needed; Show less Projects involved: • July - December 2016, Barzan Onshore Project • May - July 2016, Qatar Petrochemical Company QAPCO • February - May 2016, Barzan Onshore Project • November - February 2015 - 2016, Dolphin Energy Shutdown • November - May 2014 - 2015, Qatar Petroleum Turnaround • Responsible for Planning & execution of all the activities on site. Preworks preperation, manpower and material supply, equipment tools and consumables; • Coordinate the shop fabrication of… Show more Projects involved: • July - December 2016, Barzan Onshore Project • May - July 2016, Qatar Petrochemical Company QAPCO • February - May 2016, Barzan Onshore Project • November - February 2015 - 2016, Dolphin Energy Shutdown • November - May 2014 - 2015, Qatar Petroleum Turnaround • Responsible for Planning & execution of all the activities on site. Preworks preperation, manpower and material supply, equipment tools and consumables; • Coordinate the shop fabrication of piping spools and steel structure supports, according to the approved for construction drawings supplied by the vendor; • Studying and reviewing supplied P&ID, highlighting discrepancies and recommending corrective measures to be taken after site surveys; • Prepare the hydro-test procedure, ensure instruments are calibrated with valid certificate; • Prepare the method statements for piping, pressure vessels, heat exchangers, tanks in accordance with API; • Monitor and control the subcontractors daily progress, provide assistance when needed; Show less

Mechanical Site Engineer

• Sep 2012 - Oct 2014