Experience

Lumitex

• United States
• Appliances, Electrical, and Electronics Manufacturing
• 1 - 100 Employee

• Electrical Design Engineer

  • Jul 2022 - Present



Sandvik

• Sweden
• Mining
• 700 & Above Employee

• Electrical Engineer

  • Jan 2022 - Jul 2022

  Alachua, Florida, United States • Designed prototype equipment for R&D activities connecting various peripherals (temperature sensors, inclination sensors, data loggers, LiDAR sensors, etc.) to PLCs via direct connection and/or CAN bus protocol. • Developed and released BoMs, cable drawings, assembly documentation in Siemens TeamCenter (PLM software) for multiple projects. • Collaborated with project managers and product engineers of varying engineering disciplines to provide electrical support and innovative solutions… Show more • Designed prototype equipment for R&D activities connecting various peripherals (temperature sensors, inclination sensors, data loggers, LiDAR sensors, etc.) to PLCs via direct connection and/or CAN bus protocol. • Developed and released BoMs, cable drawings, assembly documentation in Siemens TeamCenter (PLM software) for multiple projects. • Collaborated with project managers and product engineers of varying engineering disciplines to provide electrical support and innovative solutions to design issues. • Reviewed manufacturing issue log and implemented design changes to improve assembly instructions and provide available alternatives components to BoM items. • Supported Automation Software group with electrical hardware engineering assistance. • Identified gaps in on-board training for Electrical Engineers, developed a training improvement plan, and began developing training documentation. Show less



Philips

• Netherlands
• Hospitals and Health Care
• 700 & Above Employee

• Development Engineer

  • Sep 2019 - Dec 2021

  Gainesville, Florida, United States • Implementing changes to multiple MRI Receive coil products for compliance to RoHS EU Directives. • Re-designing match circuits and loop antennas for optimal SNR and safety in MRI Receive coil products. • Executing lateral design of PCBAs in MRI coil products to standardize assemblies and increase cost savings. • Conducting MRI system level testing of coil designs to verify compliance to IEC safety standards and writing subsequent reports (i.e., Verification testing, IEC/EN60601-1… Show more • Implementing changes to multiple MRI Receive coil products for compliance to RoHS EU Directives. • Re-designing match circuits and loop antennas for optimal SNR and safety in MRI Receive coil products. • Executing lateral design of PCBAs in MRI coil products to standardize assemblies and increase cost savings. • Conducting MRI system level testing of coil designs to verify compliance to IEC safety standards and writing subsequent reports (i.e., Verification testing, IEC/EN60601-1, IEC/EN60601-1-2, IEC/EN6000-4-2, SPT, etc.). • Collaborating with other in developing, reviewing, and releasing supporting documentation for release of MRI receive coil products (dFMEA, pFMEA, DHFs, DHRs, verification reports, Risk Management documentation) • Reviewing Supplier Change Requests, testing and executing design changes to minimize manufacturing delays and ensure reliability is maintained.

• Electrical Design Engineer II

  • Oct 2017 - Sep 2019

  Gainesville, Florida Area • Collected RoHS compliance data from part manufacturers and supported updating parts in Agile PLM system. • Replaced obsolete manufacturer parts with RoHS compliant replacements. • Supported fellow engineers and technicians with various tasks including RoHS compliance, Reliability, & IPC compliance of PCBA Designs and cable assemblies.

• Electrical Design Engineer I

  • Oct 2015 - Oct 2017

  Gainesville, Florida Area • Designed, prototyped, and tested RF coils for MRI systems with supporting test fixtures and equipment. • Developed documentation for Lifecycle Reliability Test Fixture that utilized Omron PLC, switches, and relays. • Demonstrated good design practices for DfM, DfC (Cost), and DfR (Reliability). • Supported release of various 1.5T and 3.0T Orthopedic coils for NPI Group (i.e. MRI system level V&V Testing). • Assisted production with the assembly, testing, tuning, and… Show more • Designed, prototyped, and tested RF coils for MRI systems with supporting test fixtures and equipment. • Developed documentation for Lifecycle Reliability Test Fixture that utilized Omron PLC, switches, and relays. • Demonstrated good design practices for DfM, DfC (Cost), and DfR (Reliability). • Supported release of various 1.5T and 3.0T Orthopedic coils for NPI Group (i.e. MRI system level V&V Testing). • Assisted production with the assembly, testing, tuning, and troubleshooting of newly released MRI coils.

• Service Technician III

  • Jun 2015 - Oct 2015

  Gainesville, Florida • Serviced and repaired MRI coils from various OEMs that were received from field. • Tested and tuned various PCBAs and sub-assemblies used in MRI coils. • Sharpened analytical techniques and exploratory abilities.

• Electronics Tester III

  • Nov 2013 - Jun 2015

  • Assisted several lines with the assembly, testing, tuning, and troubleshooting of MRI coils. • Gained valuable troubleshooting experience through repairing sub-assemblies and cables. • Collaborated with others to solve engineering and manufacturing challenges. • Trained new and current employees to assemble, test and tune MRI coils.



Highroller Fishing Lure Company

• Manufacturing Engineer

  • Jan 2013 - Mar 2013

  Gainesville, Florida Area • Designed and implemented a Priming & Painting Machine and Process which increased production by 200-260%. • Backward Engineered Solidworks Lure Template designs for future use of CNC Machine. • Designed & Installed Visitor/Customer Assistance System for Employee Working Area.