Experience

Shelter Group.

• Qatar
• Construction
• 100 - 200 Employee

• MEP Supervisor

  • Oct 2020 - Present

   Preparation of daily pre-plan activity/task for MEP services such as Electrical, Mechanical, Plumbing, HVAC, BMS, Fire Protection & Fire Fighting systems (Fire Pumps, Fire Extinguisher, Sprinkler, Hydrant, Fire Alarm systems & Fire Suppression systems).  Preparation of weekly plan for PPM activity as per schedule.  Preparation of weekly plan for CM task as per priority.  Well, organized on handling manpower in different sections.  Responsible for contractor welfare status and safety in the working area by conducting toolbox talk.  Well, organized weekly, and monthly coordination meetings with the client.  Assist field technicians with fault finding & troubleshooting.  Managing work safely in compliance with HSSE. Show less



Qatalum

• Qatar
• Mining
• 700 & Above Employee

• Maintenance Coordinator Fire & Gas

  • Jun 2019 - Jun 2020

   Preparation of weekly Pre-plan activity/task for Fire Alarm System (Addressable, Conventional & Vesda), Fire Suppression (FM 200, Argon, Inergen & Ansul), Fire Fighting (Sprinkler, Hydrant & Deluge) to execute by support contractor according to new and pending Work Order raised by area owner/end-user.  Fully engaged in operating of SAP system in accordance with priority pertaining on Fire Alarm System (Addressable, Conventional & Vesda), Fire Suppression (FM 200, Argon, Inergen & Ansul), Fire Fighting (Sprinkler, Hydrant & Deluge) PM and CM of the entire Aluminium Plant.  Fully responsible for Fire & Gas PM/CM planning based on annual planned plant-wide.  Well, organized weekly, and monthly coordination meetings with other disciplines like HSSE, Mechanical, Electrical, Civil, HVAC, and Security with regards to Fire & Gas system availability and accuracy on the entire plant.  Assist the Engineering Department in reviewing any variation, modification, or new project execution on the plant pertaining to Fire & Gas System.  Responsible for contractor welfare status and safety in the working area by conducting toolbox talk before commencing work.  Responsible for revising the OPL/SOP in accordance with the new revision number released by the management.  Assigned as PRW to review & approve the support documents like JRA and Method of Statement attached on Work Permit. Show less



Qatar Foundation

• Qatar
• Non-profit Organizations
• 700 & Above Employee

• Operation & Maintenance Coordinator - Instrumentation

  • Apr 2005 - Jun 2017

  Duties and Responsibilities:  Handling technical issues with customers, Project Management Consultants, and Contractors, coordinating with the commissioning Department with vendors & OEM, and Standardizing the automation solution for industrial applications.  Handling warranty issues, preparing schedules & agendas for Training, Conducting Site Acceptance Tests, Participating in Factory Acceptance tests for BMS/FAS/Security System (CCTV/ACS) projects, and providing assistance in CAFM (Oracle) coding for scheduling Maintenance of Equipment/systems.  Project Execution: Pursues long-term business for existing clients. Propose the most effective solution for the customers and the organization.  Preparation of technical studies and engineering of BMS/FAS/Security System (CCTV/ACS) offers & tenders. Responsible for successful & efficient execution of projects in terms of quality, cost, and schedule.  Project Management and New Facilities: Performing minor modifications to major revamp in BMS/FAS systems in existing projects, Reviewing Engineering Submittals, Technical Assessments, Monitoring and control of execution, Cost control, Resource Management, Project schedule monitoring, initiation of Handover to the operations and maintenance team. Organize training for newly installed systems.  Report generation and preparation of standard work instructions for BMS/FAS/Security systems and procedures to carry out the testing.  Close supervision of Monthly, Quarterly, Semi-Annual, and Annual PM/CM activity for BMS/FAS/Security System (CCTV & ACS).  Prepared customer satisfaction surveys on a monthly basis to keep track of customer complaints and attend to them in a timely manner. Show less



Johnson Controls Middle East and Africa

• United Arab Emirates
• Industrial Machinery Manufacturing
• 300 - 400 Employee

• Maintenance Fire & Gas Team Lead

  • May 2004 - Mar 2005

  Duties and Responsibilities:  Responsible for PTW preparation, endorsement, execution & closed out for work completion.  Maintenance of Fire & Gas monitoring systems such as General Monitors, Zsieger, Simplex, Series; 4100C, Systron Donner, How panel, Consillium, Siemens, Cerbirrus, Wormald, etc.  Carry out daily basis monitoring checks on fire & gas PLC server’s monitoring systems.  Preventive maintenance checks of Fire & Gas instruments such as Heat, Smoke, H2S (hydrogen sulfide), Flammable (hydrocarbon), UV/IR Flame, SO2, etc.  Functional test of fire & gas Inergen, Halon, & CO2 (Wormald systems) based on Cause & Effect during shutdown & maintenance. Preventive maintenance of water Deluge skid & sprinklers systems. Installations, Commissioning of fire & gas monitoring systems.  Troubleshoot on Fire & Gas PLC’s Input & output modules that are connected to fire & gas instruments. Show less



JGC / KBR Joint Venture

• Algeria, Africa

• Instrumentation Commissioning Technician

  • Sep 2003 - Apr 2004

  Duties and Responsibilities:  Performed laying of instrument process tubes, cables trays/ladders, stanchion/brackets.  Carry out cable insulation testing & termination on the Instrument cabinet till the Marshaling panel.  Installation of field instruments based on project RFIT, calibration and Stroking of Control Valves, and pre-functional test for compressor skid instrument transmitters. Calibration/loop checks of gas detectors like Open Path detectors, UV/IR flame, Hydrocarbon, Toxic gas (dragger), etc.  Carry out pre-commissioning of instrument installations completion works of vendor-supplied equipment’s Rolls Royce Turbine.  Assign as QC Instrument Inspector as preparation for RFIT.  Conducted pre-com & commissioning activity along with client prior to testing and start-up  Assign the maintenance warranty period. Show less



Consolidated Contractors Company

• Greece
• Construction
• 700 & Above Employee

• Electrical and Instrumentation Technician

  • Jun 2002 - Jun 2003

  Duties and Responsibilities:  Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior to work execution/start up.  Carry out the installation of instrument conduit pipes, cable trays, and ladders. Cable laying & termination from instrument cabinets till marshaling panels, control valves, relief valves field stroking, and calibration according to manufacture specifications and requisition.  Calibration of smart transmitters, Pneumatic and electronic types including miscellaneous instruments such as PT, TT, LT, FT, Level switches, Pressure switches, Gauges (Pressure, Temperature, level, flow), Recorder, etc.  Familiarization and interprets P&ID, ILD, Hook-up drawing, and location drawings.  Clearing of punch list captured during site inspection & initiate the list for re-inspection for close out.  Perform pre-commissioning and commissioning activity along with client prior to testing/start up. Show less



Kentz - now a part of Kent

• United Arab Emirates
• Engineering Services
• 700 & Above Employee

• Instrumentation Technician

  • Sep 2000 - Dec 2001

  Duties and Responsibilities:  Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior to work execution/startup.  Performed calibration (including bench & field) overhauling (existing) of different types of valves likes; Butterfly, Relief, Split ranges type, Shutdown valves (field operation) also Motor Operated Valves (MOV). Manufactured by ABB, Dresser, Masoneilan, Fisher, etc.  Assist console operator (DCS/ESD) monitoring system for functional and loop checking. Perform Fire & Gas detectors loop checks such as Toxic gas, Flammable gas, UV/IR flame, and Heat detectors installed at the Turbine compartment.  Preparing of instrument loops included, as a document used for loop checking.  Function test of process instruments (bench & field) like; PT, TT, FT, PDT, & LT. Transmitter, gauges, I/P converter, and Pressure/Temperature Recorder, etc. manufactured by Rosemount, Foxboro, Honeywell, Yokogawa, Barton, Wika, Calibration of process instruments, such as; Pressure Flow, Temperature Ashcroft, Budenburg, Stewart Buchanan.  Perform pre-commissioning and commissioning activity along with client prior to testing/start up. Show less



DL E&C Co., Ltd

• South Korea
• Construction
• 700 & Above Employee

• Instrumentation Technician

  • Jul 1999 - Jul 2000

  Duties and Responsibilities:  Preparation of PTW & endorsed to Authority, Controller and conduct safety tools box talk prior to work execution/startup.  Carry out the installation of cable trays, conduit & PVC piping installation, and cable pulling.  Cable testing (Insulation test), cable pulling of HV and LV cable, and termination.  Installation of switchgear, transformer, MCC panel, MV & LV panel, lighting fixture, and power outlet. Wiring and termination of the motor control panel (internal/external), MV, and LV panel.  Calibration of Electronics / Pneumatic smart transmitters such as; PT, TT, LT, FT, PDT, gauges, etc. manufactured by Yamatake Honeywell, Rosemount, and Yokogawa.  Assign as QC Instrument Inspector to prepare field inspection report according to the scope of work for instruments such as visual inspection of stanchion location, process impulse line, pneumatic signal tubing, air piping, instrument cables termination, leak testing, and transmitters installations prior to loop checking.  Performed pre-commissioning and commissioning activity along with client prior to testing/start up. Show less



Philippine Hitachi Plant Co.

• Philippines

• Industrial Electrician

  • Jul 1997 - Jul 1999

  Duties and Responsibilities:  Carry out the installation of cable trays, conduit & PVC piping installation, and cable pulling. Perform cable testing (Insulation test), cable pulling of HV and LV cable, and termination.  Installation of switchgear, transformer, MCC panel, MV & LV panel, lighting fixture, a power outlet,  Wiring and termination of the motor control panel (internal/external), MV and LV panel, Installation of LV systems such as fire alarm system, PA system, telephone, and data cabling.  Assist supervisor/foreman with daily plan activity.  Perform phase rotation testing & commissioning activity.  Carry out punch list rectification for close-out completion.  Fault troubleshooting capability expertise.  Active maintenance member during the warranty period. Show less