Experience

BCM ELECTRONICS CORPORATION SDN BHD

• Malaysia
• Appliances, Electrical, and Electronics Manufacturing
• 100 - 200 Employee

• Senior Electronic R&D Engineer

  • Sep 2017 - Present

  • Collaborated with Motorola Solutions's design team for walkie-talkie accessories new product design.• Partnered-ship with oversea's design team for 2nd generation of ODM Luminaire by assessing Product Test Report and product sample for submission to TNB & JKR.• Initiate application and ensure items & documents readiness prior to TNB's SGP & JKR's EMAL submission.• Design PCB layout using PCB Design Tool (Altium Designer 20) in compliance with MIL-810G world standard.• Involved in internal New Product transfer with NPI Team.• Deal with internal SCM and external vendors/sales for any part/component purchase.• Deal with internal Business Development unit and/or customer(s) for feedback/comment on design requirement.• Deal with internal TSE team for developing 12M Product Specifications for all projects transferred to mass-pro.• Actively coordinating factory external audit readiness meeting in terms of raw incoming materials, production assembly line and well-furnish Q-Plan with Manufacturing Team i.e TOP, QA & Production team for MS IEC 60598-1, MS IEC 60598-2-1 & MS IEC 60598-2-3 compliance for annual audit surveillance for license renewal purpose.Project(s) involved:• General Fixed LED Light (9W & 18W) - SIRIM annual license renewal.• ODM LED Street Light (80W, 120W & 210W) - SIRIM annual license renewal.• 2nd generation ODM LED Street Light• Motorola's Walkie-talkie Holster.• Motorola's Radio Speaker Microphone (RSM) accessories.• 2nd generation of Single & Three Phase Smart Meter(s)

• Electronic R&D Engineer I

  • May 2014 - Aug 2017

  • Partnered-ship with INESH GROUP PTE. LTD.'s E&E hardware design team in Smart Energy Metering for TNB Research Sdn Bhd (M).• Key support in few ODM projects i.e LED Luminaires to supply to Malaysia's local authorities.• Design, simulate and build electronic circuit.• Design PCB layout using PCB Design Tool (PADS Mentor) in compliance with UL/IEC world standard.• Prepare Bills of Material (B.O.M) and purchase components for sample/concept build.• Prepare PCBA sample boards for concept proofing.• Involved in internal New Product transfer with NPI Team.• Deal with internal SCM and external vendors/sales for any part/component purchase.• Deal with internal Business Development unit and/or customer(s) for feedback/comment on design requirement.• Deal with internal TSE team for developing 12M Product Specifications for all projects transferred to mass-pro.• Worked closely with accredited local and oversea Testing Laboratories during product's design conformance phase.• Worked closely with Product Certification Bodies i.e Suruhanjaya Tenaga, SIRIM QAS for CoR/CoA application and SIRIM label certification scheme for product-enabling SIRIM sticker.• Coordinated factory external audit readiness in terms of raw incoming materials, production assembly line and well-furnish Q-Plan with Manufacturing Team i.e TOP, QA & Production team for MS IEC 60598-1, MS IEC 60598-2-1 & MS IEC 60598-2-3 compliance.• Involved with internal ODM team for setting up a new Calibration Laboratories in compliance with MS ISO 17025, MS IEC 62051-21, MS IEC 62052-21 & MS IEC 62052-23.Project(s) involved:• General Fixed LED Light (9W & 18W) - SIRIM complied.• ODM LED Street Light (80W, 120W & 210W) - SIRIM complied.• Smart Energy Metering System

• Electronic R&D Engineer II

  • Jan 2012 - Apr 2014

  • Collaborated with UNIVERSITI KEBANGSAAN MALAYSIA (UKM) post-graduates team for DFM medical grade product. • Key support in few ODM projects i.e LED Luminaires to supply to Malaysia's local authorities.• Involved in GSM/GPS vehicle tracking project with Polis Diraja Malaysia (PDRM).• Design, simulate and build electronic circuit.• Design PCB layout using PCB Design Tool (PADS Mentor) in compliance with UL/IEC world standard.• Prepare Bills of Material (B.O.M) and purchase components for sample/concept build.• Prepare PCBA sample boards for concept proofing.• Involved in internal New Product transfer with NPI Team.• Deal with internal SCM and external vendors/sales for any part/component purchase.• Deal with internal Business Development unit and/or customer(s) for feedback/comment on design requirement.• Assist team-mates for SW testing & troubleshooting.Project(s) involved:• GPS Tracker for Authorities and Parental Control• Optical Fetus Heart Rate Sensor• General Fixed LED Light (9W & 18W)• LED Downlight (8W, 12W & 15W)• PLC Programming Module for Smart LED Street Light System.



Cansys Electronics (M) Sdn. Bhd.

• Hardware Design Engineer

  • Dec 2009 - Dec 2011

  • Collaborate with PROTON R&D design team for Body Controller Module, Ip Tester Wire Harness Checker and Simulation Box for PROTON EXORA Turbo version.• Design, simulate and build electronic circuit.• Design PCB layout using PCB Design Tool (DXP Altium, Cadence etc.)• Prepare Bills of Material (B.O.M) and purchase components for sample/concept build.• Test and troubleshooting the design.• Conduct SW testing onto fully assembled board using GUI Software (Visual Basic 6).• Deal with vendors/sales for any part/component purchase.• Deal with customer for any feedback/comment.• Assist team-mates for SW testing & troubleshooting.Project(s) Involved• Voice Encryption Method• RS232 serial communication system• USB 2.0 driver for Microchip Controller• Wire Harness Checker for automotive CAN bus system.• 433MHz RF Module for Remote Keyless Entry System• DC SMPS Power Supply• Cabin Comfort Controller Module for Saudi Arabia automotive producer.• Vehicle Tracking System for Majlis Perbandaran Kota Bharu.• Dead-reckoning system for AGPS using U-Blox GSM/GPS Module.

• Embedded Software Engineer

  • Oct 2008 - Nov 2009

  • In-charge in Voice Encryption method for VoIP.• Firmware development using Code Composer Studio and Microsoft Visual ++ language.• Data accumulation and digit scrambling data using Microchip Embedded Software Tools.



Universiti Kebangsaan Malaysia

• Higher Education
• 400 - 500 Employee

• Laboratory Assistant

  • Jul 2007 - May 2008

  Supervise undergraduate students for Electronic Digit subject. Supervise undergraduate students for Electronic Digit subject.



Tenaga Nasional Berhad

• Malaysia
• Utilities
• 700 & Above Employee

• Practical Trainer

  • May 2007 - Jul 2007

  • Involved in daily routine check-up for Northern region electrical substation expanding from Perlis to North Perak.• SCADA Project.• Maintenance for 132kV & 275kV Overhead Transmission Power Lines. • Involved in daily routine check-up for Northern region electrical substation expanding from Perlis to North Perak.• SCADA Project.• Maintenance for 132kV & 275kV Overhead Transmission Power Lines.