Experience

Renesource Inc.

• Philippines
• Environmental Services
• 1 - 100 Employee

• Project Engineer/Consultant/Owner’s Engineer

  • Oct 2019 - Present

  1. Conduct site survey of the prospected project for rooftop or ground mounted EPC (Engineering, Procurement and Construction) for residential, commercial or industrial. Based on site survey the design stage follow to determine the most efficient plant design. Factors to consider for an effient plant design such as PV selection, layout, spacing, orientation, angle, cable lengths, and others factors contributing to the optimal performance of the solar power plant.2. Supervise the project site woks and generate report base on installation progress status, testing, and commissioning works of the PV module and Inverters.3. Perform the following function as Owner’s Engineers thus include (but are not limited to):- Site Handover Documentation- Incoming Goods Control- Quality Assurance/Quality Control Inspections on works completed based on IFC drawing through RFI issued by the contractor- Project Progress Status Reporting- Review and approval of designed and as built drawings- Issue NCR for the non compliance works of the contractor base on the approve project guidelines and criteria.- Commissioning and Final Acceptance Test- Completed a 50MW AC SAN MIGUEL, BULACAN SOLAR FARM PROJECT.



Dynamic Builders & Constructing Co. (Phil.), Inc.

• Electrical Supervisor/Project in Charge

  • Jan 2016 - Oct 2019

  1. Supervise electrical construction works at the project site for both admin personnel and subcontractor.2. Generate technical reports and subcon accomplishment report subject for their work progress billing. 3. Generate submittal of detailed material and specification (DMAS) for client approval prior acquisition of materials.4. Generate construction schedule and S-Curve for project projected time table of completion. 5. Perform material estimate for the require material of the project based on latest IFC drawing or shop drawing and generate request to purchase (RTP) for the required material at site based on the proress of the project.6. Perform quantity survey (QS) and estimate cost in preparation for new project bidding at planning department. 7. Participate on discussion of new project in providing strategic planning of electrical works and coordinate with other engineering trades.8. Perform internal quality audit (IQA) at project site and check if the work flow and safety procedure were based on recent document of the company.9. Perform Testing & Commissioning of the completed project base on require testing requirement of the client related to electrical equipment.



First Farmers Holding Corporation

• Shift Supervisor

  • Nov 2013 - Jan 2016

  1. Supervise electrical works at the factory & disseminate electricians in the area where breakdown call happen in the factory.2. Assist electrician in troubleshooting of equipment's and motor control.3. Design of motor control based on factory requirements4. Modify motor control that will protect an induction motor from breakdown by introducing new/advance technology of motor control.5. Generate report based on the equipment breakdown and recommend corrective action to prevent occurrence of the equipment failure.6. Prepare material requisition slip (MRS) as spare material that is needed in the factory when trouble of the equipment require for replacement. 7. Perform inventory of electrical spare parts that are needed in the factory.8. Perform material follow-up on delivery schedule/status at the MMD based on generated material requisition slip (MRS) and approved purchase order (PO) by the procurement department.9. Coordinate with other department for new projects and equipment that require for electrical connection and motor control.10. Participate & supports factory sustaining issues to resolve, leading to anticipate problems that is related to electrical equipment.11. Perform slow roll and synchronization of each steam turbine generators (Re: Power Plant & Power House) with respect to power lines of the National Grid Corporation of the Philippines (NGCP).12. Monitor steam turbine generator condition based on available monitoring meters at the control room.13. Start-up diesel generator in the event of power plant steam turbine fails to start to start-up cane milling operation.14. Set-up/program soft-start/variable frequency drive (VFD), across the line and WYE-DELTA of newly set-up motor control at the factory.15. Perform testing of electrical equipment's using current ejector, insulation resistance and PTT to validate functionality of electrical equipment's and devices.



Arnaout Contracting Est.

• Saudi Arabia
• Construction
• 1 - 100 Employee

• Site Engineer

  • Aug 2008 - Jun 2013

  1. Generate technical reports on all matters related to technicalities of the project, material requisitions, subcontractor performance, & daily site activities & site related technical issues. 2. Review & fully comprehend IFC drawings, conveying technical guidance & support to the Site Electrical Foreman for a given work. 3. Participate in producing of Shop Drawings, liaising with the AutoCAD operator & P.E.4. Perform QS tasks required for material requisitions based on IFC drawing, scope changes, invoicing of materials, etc. 5. Establish prioritization of material to be order & generate RPO based on long lead items w/c was known on IFC drawing & discuss w/ Project Mgr. to cope up lead time delivery that correspond to the project time frame schedule of completion.6. Discuss spec's req't of the material or electrical equp't based on design drawing or IFC the supplier to acquire appropriate material or elect'l equip't.7. Prepare technical material submittal to convey information pertaining to specification req'ts of the design drawing.8. Monitor all elect'l construction works on site ensuring productivity were optimum based on spec's. & IFC drawings.9. Supervise electrical work of the subcontractors, ensuring their compliance to work req'ts including prevailing health & safety guidelines. 10. Prepare and submit to the owner representative Technical Queries (TQ’s) as the need for technical clarifications arise on IFC drawings. 11. Schedule and participate in Technical Inspections jointly w/ the owner representative for construction activities & incoming materials.12. Record all construction deviations required for the production of As-Built drawings, liaising w/ the AutoCAD operator & Project Engineer. 13. Review As-Built drawings done by the AutoCAD operator & edit deficiency on drawing if found prior to submittal to consultant/owner. 14. Assist Installation/Set-up, Perform Testing & Commissioning various electrical equipment's



Three Five System Pacific Inc.

• Process Development Engineer

  • Jun 1997 - May 2002

  1. Participate in establishing goals and objectives of the engineering group.2. Spearheads yield improvement presentation through standard corrective actions with the production personnel and other support groups.3. Design and recommends improvements and changes on materials, machine and processes.4. Provides immediate and close loop feedback regarding material, production, design and quality issues.5. Coordinates with Training Section for training program on (PDE) Process Development Engineers for their career growth and motivation.6. Benchmarking of new technology through company hopping.7. Set-up new technology for yield, quality, and cycle time improvement.8. Supports line sustaining issues to resolve as well as anticipate problems related to process.9. Spearhead process optimization through (DOE) Design of Experiments.10. Technology Transfer – Trained Technical Supports and sets-up production line at Three-Five System Ltd. – Beijing, China.



TEAM PACIFIC CORPORATION

• Philippines
• Semiconductor Manufacturing
• 100 - 200 Employee

• FOL Assembly Technician (SMT)

  • Jul 1994 - Mar 1997

  1. Perform daily calibration of reflow oven.2. Record data of all SMT machines.3. Perform preventive maintenance.4. Response to breakdown call of the equipment.5. Making breakdown report and establish corrective action corresponding to machine breakdown.6. Participates in decision making with the assign Process Engineer in my area of responsibilities.7. Assist Process Engineer in doing the evaluation process in my area of responsibilities.