Experience

Mesh & Bar

• Australia
• Wholesale Building Materials
• 1 - 100 Employee

• Senior Scheduler

  • Sep 2021 - Present



InfraBuild Australia

• Project Coordinator

  • Aug 2017 - Sep 2021

  - Reinforcing scheduling and project coordination, for large scale construction projects based in the South East Queensland region. - Responsible for determining supply of concrete reinforcing and concrete construction products for typical projects ranging from: TMR Civil, Industrial facilities, residential/commercial mid and high-rises. - Full turn-key customer coordination. I.e Point of contact with the client from start to finish of the concrete works. - Some recent/current projects are; Queens Wharf (Multiplex, Brisbane City), Vue Terrace Homes (Hutchinson, Gold Coast, Robina), Le-Bain (Torre, 18 storey, Brisbane, Newstead), Luminare (Torre, 30 storey, Brisbane, Newstead), South City Square (Pellicano, 22 storey, Brisbane, Woolloongabba) - Contributed to Infrabuilds recent modernisation of work techniques, methods and procedures, as acquired from my previous roles. - Referencing to AS3600, TMR Standards, and various construction system referencing.



Aker Solutions

• Norway
• Oil and Gas
• 700 & Above Employee

• Senior Structural Engineer

  • Oct 2015 - Dec 2016

  • ‘Johan Sverdrup’, (Statoil, North Sea). • Contract role. • Multi-platform bridge linked development. • Joined the Detailed Design team for the design of the Riser Platform. • Responsible to design the non-standard nodes and connections. • Additionally, provided adhoc calculations and advice for the secondary engineering team. • Design/analysis to European design codes (EC3, DNV, Norsok). • Design produced with STAAD.Pro and design model reviewing in ABACUS and SESAM. Calculations produced in Microsoft Excel, STAAD.Pro and Toolkit. PDMS and Autodesk Navisworks used for daily referencing.



Amec Foster Wheeler

• United Kingdom
• Oil and Gas
• 700 & Above Employee

• Principal Structural Engineer

  • Jul 2012 - Oct 2015

  • ‘Cygnus Project’, (GDF Suez, North Sea). • Contract role. • Multi-platform bridge linked development. • Completed project from start to finish. Phases include: FEED, Detailed Design, Follow-On and Hook-up. • Initial responsibility was the area lead primary analyst; to design, coordinate and manage the Alpha Production and Utilities (APU) Platform carcass design team. Also ‘Seconded’ the management of our team’s platform requirements. During Follow-On and Hook-up, the responsibility changed to cover all four Cygnus platforms, and to cover all structural design issues. • Provided progress reporting, attending model review meetings, aided with resourcing strategies, and liaised with other disciplines. • Additionally performed; review and redesign of the Compression Module Flare Tower, high level reviews of major secondary items, module T&I interface and design, and represented the structural group for weight and cost reduction strategies. • Design/analysis to American design codes (API & AISC WSD). • Main steel design produced with STAAD.Pro (DD) and SACS (FEED - Compression Module and Flare only), and model reviewing in ABACUS. Secondary calculations produced in Microsoft Excel, STAAD Pro and Toolkit. PDMS and Autodesk Navisworks used for daily referencing.



CB&I (Chicago Bridge & Iron Company N.V.)

• Principal Structural Engineer

  • Mar 2011 - Jul 2012

  • ‘Golden Eagle’, (Nexen, North Sea), Topside Structure. • Contract role. • Multi-platform bridge linked development. • Joined and completed the FEED and Detailed Design phases. • Responsible as the area lead primary analyst to design, coordinate and manage the Wellhead carcass design team. Also provided design assistance on the Process/Utilities/Quarters team. • Provided the Carcass node and connection design, the offshore fire design and verification, and the design of a 3 level Waste Heat Removal structure. • Design/analysis to American design codes (API & AISC WSD). • Primary analysis produced with ASAS. Secondary calculations produced in Microsoft Excel, STAAD.Pro and Toolkit. PDMS and Autodesk Navisworks used for daily referencing.

• Senior Structural Engineer

  • Nov 2010 - Mar 2011

  • ‘Clair Ridge’, (BP, North Sea), Topside Structure. • Contract role. • Joined and completed the FEED phase, of a 9500Te module (Drilling and Production, Module). Continued on to the Detailed Design Phase. • Responsible as a Primary Analyst to coordinate and manage the Carcass modeling. • Local design of a bridge landing (sliding end) interfacing with a large and complex multidiscipline, multi-level pipe-rack structure. • Produced the project deck stiffener design to standardize sizing across the project. • Design/analysis to American design codes (API & AISC LRFD). • Primary analysis produced with SESAM. Secondary calculations produced in Microsoft Excel, STAAD.Pro and Toolkit. PDMS used for daily referencing.



CB&I

• Oil and Gas
• 1 - 100 Employee

• Senior Structural Engineer

  • Jun 2010 - Nov 2010

  • ‘Goliat’, (Eni Norge, Barents Sea [Norway]), FPSO, Cylindrical Floater Topside Structure. • Contract role. Project was stopped. • Joined the Detailed Design phase. • Responsible for the Carcass design of the Utilities Module. Predominately a stiffened-plate structure, therefore modeled with both beam and 2D plate elements. • Local design of all stiffened-plate items within the Utility area boundary. • Produced the methodology approach for Dropped Object design for the project. • Secondary steel design, including access platforms and equipment supports. • Design/analysis to Norwegian and Euro design codes. • Primary analysis was produced with STAAD.Pro. Secondary calculations produced in Microsoft Excel, STAAD.Pro, STIPLA and Toolkit. PDMS used for daily referencing.



KBR, Inc.

• United States
• IT Services and IT Consulting
• 700 & Above Employee

• Senior Structural Engineer

  • Oct 2009 - Jun 2010

  • ‘The Gordon Project’, (Joint venture: Chevron, Exxon Mobil and Shell, Western Australia). Onshore LNG facility. To be built on a heavily environmentally protected island - Barrow Island. • Contract role. • Joined the tail end of FEED, and continued into the Detailed Design phase. • Responsible for the Carcass design for a 5800Te PAU (Refrigeration). • Secondary steel design, including stair towers, and equipment supports. • Design/analysis to Australian and American design codes. • Primary analysis produced with STAAD.Pro. Secondary calculations produced in Microsoft Excel, STAAD Pro and Toolkit. PDMS used for daily referencing.



Slp Consultants Inc

• United States
• Oil and Gas

• Structural Engineer

  • Aug 2007 - Oct 2009

  • ‘Valhall’ (BP, North Sea), Topside Modules. • Contract role. • Joined and completed the Detailed Design Phase. Then completed the site placement on the SLP fabrication yard in Lowestoft (6 months). • Initially responsible for two 300Te Modules (Low Voltage and Emergency modules). Solo responsible for all design aspects. • Later joined the site construction team by producing construction sequence analysis for a 9 storey ‘Living Quarters’ module. Responsible for confirmation of ‘pancake’, level-by-level, site-moves and site-lifts, via structural analysis confirmation. • Main site duties include: Assisting construction with day-to-day site structural issues; acting project engineer by coordinating with the Aluminium subcontractor (Round House); and provided solo structural supervision during construction site moves and lifts. • Designed and detailed padeyes, spreader bars, and rigging arrangements for the temporary onsite construction sequences. • Design/analysis to European and American design codes. • Primary analysis produced with SACS suite of Programs. Secondary calculations produced in Microsoft Excel, STAAD Pro and Toolkit. Autodesk Navisworks was used for referencing.



Arup

• Mauritius
• Construction
• 1 - 100 Employee

• Structural Engineer

  • Mar 2006 - Aug 2007

  • ‘The Walbrook’ (Fosters and Partners). Onshore, 10 storey steel framed office new-build in Central London to an unusual complex shape. • Contract Role. • Responsible for the structural concept, design, and analysis of the steel framing. • Designed composite concrete slabs, and the concrete cores to British Codes. • Analysis provided with the frame analysis program; GSA. Other programs used were; Compos, Fabsec, and Microsoft Excel. • ‘The Walbrook’ (Fosters and Partners). Onshore, 10 storey steel framed office new-build in Central London to an unusual complex shape. • Contract Role. • Responsible for the structural concept, design, and analysis of the steel framing. • Designed composite concrete slabs, and the concrete cores to British Codes. • Analysis provided with the frame analysis program; GSA. Other programs used were; Compos, Fabsec, and Microsoft Excel.



Waterman Group

• United Kingdom
• Construction
• 400 - 500 Employee

• Structural Engineer

  • Mar 2005 - Mar 2006

  • ‘Liverpool St’, Onshore, multi-use building, with commercial, residential, and large suspended green areas. It was part of the redevelopment of Liverpool’s CBD. • Contract Role. • Typical concrete design of slabs/beams (Reinforced and Post-tensioned), columns, walls and pile caps to British Codes. • Analysis and calculations provided by RAPT, Masterseries, and Microsoft Excel. • ‘Liverpool St’, Onshore, multi-use building, with commercial, residential, and large suspended green areas. It was part of the redevelopment of Liverpool’s CBD. • Contract Role. • Typical concrete design of slabs/beams (Reinforced and Post-tensioned), columns, walls and pile caps to British Codes. • Analysis and calculations provided by RAPT, Masterseries, and Microsoft Excel.



Robert Bird Group

• Australia
• Construction
• 700 & Above Employee

• Structural Engineer

  • Jan 2003 - Mar 2005

  • First employment as a Post Graduate. • Permanent Role. • Worked on numerous projects for both local high-rises in Brisbane. Later joined their newly formed Global Division. Notable global projects include: Heathrow Terminal 5 Carpark, Dubai Airport Expansion, Oxford Radcliffe Hospital (UK), and Long Lane residential apartments (UK). • Designed typical concrete and steel structural elements, including concrete slabs/beams (reinforced and post-tensioned), walls, cores, pads, and footings. • Conducted site inspections, including a dilapidation inspection/reporting of the Gabba Cricket ground (Brisbane). • Analysis provided by RAM Concept, RAPT, and Microsoft Excel.



Weathered Howe Pty Limited

• Australia
• Civil Engineering

• Assistant Structural Engineer

  • Jun 2002 - Jan 2003

  • General assisting/reviewing as an Undergraduate. • Part Time. • Reviewed the Gold Coast Convention Centre’s steel seating arrangement, and reviewed concrete slab design of ‘The Aria’ residential high-rise. • Analysis provided with Multiframe and Microsoft Excel • Reviewed the Gold Coast Convention Centre’s steel seating arrangement, and reviewed concrete slab design of ‘The Aria’ residential high-rise. • Analysis provided with Multiframe and Microsoft Excel • General assisting/reviewing as an Undergraduate. • Part Time. • Reviewed the Gold Coast Convention Centre’s steel seating arrangement, and reviewed concrete slab design of ‘The Aria’ residential high-rise. • Analysis provided with Multiframe and Microsoft Excel • Reviewed the Gold Coast Convention Centre’s steel seating arrangement, and reviewed concrete slab design of ‘The Aria’ residential high-rise. • Analysis provided with Multiframe and Microsoft Excel