Experience

ORGANIC ENGINEERING CONSULTANCY

• United Arab Emirates
• Architecture and Planning
• 1 - 100 Employee

• Mechanical Engineer

  • Jun 2014 - Present

  Now working as a Mechanical Engineer, in Organic Engineering Consultancy which is basically an Architect, Structural Consulting and Project Management Company. • Reviewing and commenting of drawings, material submittals, method statements and RFI’s of all services. • Attend meetings with Client Representatives and Contractors for changes, design and progress of site. • Major responsibilities include inspection of materials and work on site as per the best standards like SMACNA, NFPA & other local authority standards and ensure that all works on site are carried as per the approved drawings with full safety. • Raising Non Conformance Report’s for works not complying with specifications, drawings or method statement. • Coordination of works with all services involved, including MEP, Fire Stopping, Civil, Arch & Interior • Making snag list , correction and approval of as-built drawings and the O&M Manual • Inspection, sampling and testing of materials and work to assure that compliance with the contract specification, ITP, quality control procedure and method statement. • Assist in the review and forward comments on the contractor’s method statement for execution of the works. • Assist in the review and forward any comments on the contractor’s technical submittals. • Inspect the work done by the contractor(s) to ascertain that work is executed in accordance with the Contract Documents and accepted practice. • Liaise with the RE for the effective implementation of the quality management systems and site supervision provision activities. • Ensure that all statutory authority NOC’s / permits / design approvals are available on site for construction. • Conduct regular (daily) site visits and supervise, verify the installation of Mechanical works ensuring compliance with the contract documents. • Raise non-conformance notices (NCNs)/reports; site inspections notices (SINs) identify quality deficiencies in conjunction with the RE. Show less



Controls Middle east

• Sharjah

• Mechanical Engineer MEP

  • Apr 2012 - Apr 2014

  • Knowledge on HVAC SYSTEM - marine systems design requirements such as SOLAS , and general marine standards and practices ( ABS, DNV ,NORSOK,LR etc) . • Detailed engineering including heat load calculations using HAP4.5 , machine selection, duct routing, duct sizing ,equipment data sheets, etc. • Equipment selection based on marine/onshore specification. • Design and configuration of HVAC control systems/BMS • Carrier E20-II - HAP 4.5 software program is used for load calculations. • Duct work is designed and fabricated as per DW 144/142 or SMACNA 1995 duct construction Standard requirements using ASTM A 527-90 steel sheet Zinc Coating. Flex duct UL No 181 Class1, Fire Dampers to UL 555 Standards fire safety, Air Filter Units as per UL 900, • Chilled water pipe work As per ASTM A 53 Seamless pipes, ASTM A 153 Steel products and ASTM B 62 Bronze or Cast valves. • Testing & Commissioning as per SMACNA 1993 HVAC Testing, Adjusting and Balancing 2ndedition. • Implementing Quality Standards as per Project Quality Plan based on BS EN ISO 9001:2000, Quality Management System Requirements and BS EN ISO 9004:2000 Guide lines for performance Improvement. Ensure Contractor working within the provisions and guidelines of the Quality Assurance system; • Ensure Contractor working within the provisions of Company HSE procedures /objectives and guidelines; Experience - 2 years Onshore Project Experience/Oil &Gas Project Experience Main Projects 1.Iraq crude oil export expansion project Phase-2 2.Construction of Oil Terminal at Hamriyah Free Zone: 3.Project Falcon at Jebel Ali Free Zone Show less



Midas Electromechanical

• Dubai

• Mechanical Engineer

  • Dec 2009 - Jan 2012

  •Include Design, Procurement, Installation, Testing, Commissioning and Operations of MEP works. • Calculate, review and improvement in design and engineering documents as per project/ client requirement.Attending the project review meetings and co-ordinate with Main Contractor & PMC. Responsible for designing the whole air conditioning systems including the Heat Load calculation (using HAP & Excel sheets) for different types of areas as per ASHRAE. • Preparation of Material Take Off's (MTO's) and Equipment/ Material Requisitions for HVAC • Designing and Drafting the ducts and chilled water system as per ASHRAE and SMACNA standards. • Preparation of Equipment/ Material Approval Requests and follow up on approvals with client. • Reviewing the quotations from the suppliers and preparing the LPO. • Supervise the works of sub-contractors Firefighting works as per NFPA standards • Implement Green House Standards and Codes to Increase efficiency of chilled-water plant so that pumps and cooling towers consume less energy, Reduce building materials, Reduce water pipe sizes, save cost and material. • Select systems that require less refrigerant charge to operate, Less refrigerant means less impact on the environment in case refrigerant leaks from the system (Use ASHRAE Standard 147 to minimize leakage or overall refrigerant emissions) • Calculate, review and improvement in design and engineering documents as per project/ client requirement • Detailed engineering including heat load calculations, system performance assessment, machine selection, duct routing, equipment data sheets, etc. • Heat load calculations (cooling loads, heating loads and airflow quantities) are based on the procedures outlined in ASHRAE Fundamentals Handbook. In particular, the cooling load calculation procedure is the ASHRAE-endorsed transfer function method (TFM).Carrier E20-II - HAP 4.34 software program is used for load calculations. Show less



Voltas Limited

• Kerala

• HVAC Engineer

  • Mar 2008 - Nov 2009