Experience

WS Engineering & Fabrication Pte Ltd

• Singapore
• 1 - 100 Employee

• Lead Piping Engineer

  • Apr 2018 - Present

  Singapore Assigned as Lead Piping Engineer for following - “BWO Adolo Phase-2” : Engineering and optimization of new M26 Phase 2 Inlet piping module with connected pipe rack, riser porch area based on BWO supplied P&IDs/Concept Layout and technical specifications. The minimum design life: 15 yrs - “North Rumaila NCS5 Compression Station” Project at IRAQ intends to capture up to 120 mmscfd of gas from ROO DS5 field which would otherwise be flared. The flared gas from DS5 is proposed to be… Show more Assigned as Lead Piping Engineer for following - “BWO Adolo Phase-2” : Engineering and optimization of new M26 Phase 2 Inlet piping module with connected pipe rack, riser porch area based on BWO supplied P&IDs/Concept Layout and technical specifications. The minimum design life: 15 yrs - “North Rumaila NCS5 Compression Station” Project at IRAQ intends to capture up to 120 mmscfd of gas from ROO DS5 field which would otherwise be flared. The flared gas from DS5 is proposed to be captured via new compression station. Total compression capacity in phase I will install reciprocating compressor of 60mmscfd capacity (4x compressors) including BOP designed for 11220 mmscfd and install additional 600 mmscfd reciprocating compressor (4x compressors). WSEF scope to design and supply TEG module to support this project with minimum design life of 15 yrs. - “FPSO Anna Nery” to be installed offshore Brazil, in the Marlim Field of Campos Basin operated by Yinson for Petrobrass. SOW involves to submit the techo-commercial bid for EPC work of Oil Separation & Stabilisation Modules / Gas Treatment Modules Modules. Bid Project Duration was Nov’2019 to Jan’2020. - “FPSO Num Du” for the Nam Du/U Minh Field Development in Blocks 46/07 and 51 offshore Vietnam. SOW involves to submit the techo-commercial bid for EPC work of all Topsides Process Modules. Bid Project Duration was Nov’2019 to Jan’2020. - “FPSO Pecan” to be operated by Yinson at Deep Water Tano Cape Three Points (DWTCTP) development offshore Ghana for Aker. SOW involves to submit the techo-commercial bid for EPC work of Gas Compression and Power Generation Modules. Bid Project Duration was Nov’2019 to Jan’2020. Show less



Eden Information Services (s) Pte Ltd

• Senior Piping Engineer

  • Feb 2017 - Jun 2017

  Singapore - “KAOMBO” Project intends to develop the resources of Gengibre, Gindungo, Canela, Louro and Mostarda West fields, located approximately 150 km from the coast of the Republic of Angola in the Block 32. Two FPSO will be installed: one at North, the other at South. The Floating Production Storage and Offloading (FPSO) vessels, based on the conversion of an existing oil tanker of the Very Large Crude Carrier (VLCC) type, will support as follows: accommodation, processing, associated systems and… Show more - “KAOMBO” Project intends to develop the resources of Gengibre, Gindungo, Canela, Louro and Mostarda West fields, located approximately 150 km from the coast of the Republic of Angola in the Block 32. Two FPSO will be installed: one at North, the other at South. The Floating Production Storage and Offloading (FPSO) vessels, based on the conversion of an existing oil tanker of the Very Large Crude Carrier (VLCC) type, will support as follows: accommodation, processing, associated systems and utilities, oil storage and export/ offloading facilities, water reinjection, gas lift and gas export. - Assigned as Lead Piping Engineer on North Kaombo project. - Coordinating with construction for completion of piping, mechanical, and general construction activities in assigned systems. Coordinating with Engineering, Construction and liaise with the Client on detail engineering requirements. Coordinating with client for weekly progress status. - Planned work activities ensuring that isometric drawings, P&id's, equipment, and materials were available to execute project in a timely manner. - Responsibility for monitoring piping construction and fabrication activities insuring quality and taking necessary actions to maintain satisfactory standards Show less



Bumi Armada

• Malaysia
• Oil and Gas
• 700 & Above Employee

• Engineer-Piping

  • Aug 2015 - Jan 2017

  Singapore “Angola Block 15/06 East Hub Project” consists of EPCI contact to deliver Floating Production Storage and Offloading (FPSO) unit containing the process, storage, and offloading facilities for the reservoirs located in the Angola Block 15/06. Function as Lead Engineer on assigned project.



Global Process Systems

• United Arab Emirates
• Oil and Gas
• 200 - 300 Employee

• Senior Piping Engineer

  • Oct 2014 - Jan 2015

  Singapore Function as Lead Engineer for “Wassana Field Development by Kris Energy”project which proposed the use of a Mobile Offshore Production Unit (MOPU) to develop the Wassana field in the southern part of the Gulf of Thailand and having MOPU design life of 5 to 7 years. The MOPU is having process packages such as crude oil separation, produced water system, produced water injection, chemical injection, fuel gas system, flare system, seawater lift pumps, chemical injection, electro chlorination unit,… Show more Function as Lead Engineer for “Wassana Field Development by Kris Energy”project which proposed the use of a Mobile Offshore Production Unit (MOPU) to develop the Wassana field in the southern part of the Gulf of Thailand and having MOPU design life of 5 to 7 years. The MOPU is having process packages such as crude oil separation, produced water system, produced water injection, chemical injection, fuel gas system, flare system, seawater lift pumps, chemical injection, electro chlorination unit, water injection booster and main injection pumps, along with wellheads on a conductor support frame, and transport facility of crude oil to an FSO for storage. Show less



McDermott International, Ltd

• United States
• Oil and Gas
• 700 & Above Employee

• Senior Piping Engineer

  • Jun 2008 - Sep 2014

  Singapore DETAILED DESIGN (EPCI) Projects: - “Ichthys Gas Field Development by Inpex” located in offshore nearby Broome and Darwin, Australia. The Field Development consists of 13 Drill Centers (DCs) which are tie back to Central Processing Unit where gas is separated & subsequently exported to shore through Gas Export Pipelines. The remaining fluids are transported to the FPSO for processing, from which the condensate is stored & exported. - “Platong Gas II Project” by Chevron Thailand… Show more DETAILED DESIGN (EPCI) Projects: - “Ichthys Gas Field Development by Inpex” located in offshore nearby Broome and Darwin, Australia. The Field Development consists of 13 Drill Centers (DCs) which are tie back to Central Processing Unit where gas is separated & subsequently exported to shore through Gas Export Pipelines. The remaining fluids are transported to the FPSO for processing, from which the condensate is stored & exported. - “Platong Gas II Project” by Chevron Thailand Exploration and Production Ltd. This Gas Processing facility includes Gas processing Platform, Flare bridge, Bridge link connecting back to existing oil processing platform & living quarter facility with Bridge link connecting back to existing living quarter platform. BID Projects: - “Gendalo & Gehem Floating Production Units by Chevron” located in the Makassar Strait, offshore East Kalimantan, Indonesia consist of Design of two FPU facilities Gendalo and Gehem. Gas & condensate produced from each Hub will be exported via separate single phase export pipeline to a shore tie-in location at Company operated Santan terminal. - “Malikai TLP (Tension Leg Platform) by Shell” located in offshore Sabah, Malaysia. The Malikai TLP topside facilities are designed to produce a capacity of 60,000 bbl/d of liquid (Oil + Water) and 50 MMscf/d of gas. The Malikai TLP is designed as a fully manned platform, complete with living quarters and a control room. - “Vietnam Block B Gas Project (VBGP) by Chevron, located in the Gulf of Thailand” The project covers Central Production Platform (CPP) for Sales Gas, Bridge-connected Living Quarters platform, a flare structure, and Bridge-connected Wellhead Platform (WHP). Assist Lead Engineer to plan & organize all aspects of piping activity work on assigned project. Show less



Technip

• Oil and Gas
• 700 & Above Employee

• Senior Piping Engineer

  • Mar 2007 - Apr 2008

  Kaulalumpur, Malaysia “Gumusut Kakap Topsides Detailed Design Project”. Gumusut Kakap is a semi-submersible Floating Production System (FPS), located in the South China Sea of Offshore, Malaysia. Assigned as “Area Engineer” responsible for Development of Equipment Layout and piping studies for compressor area, flare tower area. Providing piping loading data to civil, Extraction of Isometrics & MTO, Vendor drawings review.



Aker Solutions

• Norway
• Oil and Gas
• 700 & Above Employee

• Senior Piping Engineer

  • Aug 2004 - Feb 2007

  Mumbai Area, India Project Worked On: 1. “KGD-6 Reliance MEG project” of Reliance Industries.Assigned as a “Piping Lead Engineer”, leading a team of engineers and PDMS designers. Deputed to Aker Kvaerner Process System Norway for one month. Responsible for Transfer of 30% PDMS Model from Norway Office to Mumbai office. Engineering Coordination with other disciplines. Conducting Model Review Meetings with clients. Overall supervision of piping activities 2. “Kharg Methanol Project” of Namvaran Consulting… Show more Project Worked On: 1. “KGD-6 Reliance MEG project” of Reliance Industries.Assigned as a “Piping Lead Engineer”, leading a team of engineers and PDMS designers. Deputed to Aker Kvaerner Process System Norway for one month. Responsible for Transfer of 30% PDMS Model from Norway Office to Mumbai office. Engineering Coordination with other disciplines. Conducting Model Review Meetings with clients. Overall supervision of piping activities 2. “Kharg Methanol Project” of Namvaran Consulting Engineers, Iran. Deputed as “Piping Area Engineer” to Davy Process Technology office at London for 3 months to develop Equipment Layouts, study piping layouts as a part of Initial Detail Engineering (Reformer Area and Pipe Rack). Co-ordination with Civil for Structural design in Reformer Area. Provide input to Stress engineer & finalize the routing of high temperature lines based on comments from stress & support group. Review of 30 %PDMS Model in view of following point’s viz. engineering Design Basis, Operational requirements and Safety requirements. 3. “IR-PSF & POY Expansion Project” for client Indorama Synthetics (I) Ltd, Nagpur. 4. “CP-11 PSF (Poly Staple Fiber)” for Reliance Industries Ltd. at Hazira, Surat. Worked as “Piping Area Engineer” responsible for Development of Equipment Layout and piping studies, providing piping loading data to civil, checking of Piping Layouts, Support Layouts, Checking of Isometrics & MTO, and Co-ordination with other departments. Preparation and checking of stress sketches, Vendor drawings review. Checking Nozzle orientation Attending design review meetings with Client and Process Licensor. Site Deputation for 03 months for Design assistance during construction work. Show less



Toyo Engineering Corporation

• Japan
• Construction
• 700 & Above Employee

• Assistant Piping Engineer

  • Dec 2002 - Aug 2004

  Mumbai Area, India - LOBS Unit at B.P.C.L Mahul, Mumbai. - Jubail United Petrochemical Company, Saudi. Self-Involvement: Assigned as Area Engineer for main rack piping, OSBL piping and Tank farm piping. - Responsible for Preparation of preliminary piping layouts referring to P&IDs, - Preparation of Nozzle orientation, clip information for vessels, tanks. - Civil Information Drawings. Issuing Layouts for modeling purpose. - Interaction with other disciplines like process, civil… Show more - LOBS Unit at B.P.C.L Mahul, Mumbai. - Jubail United Petrochemical Company, Saudi. Self-Involvement: Assigned as Area Engineer for main rack piping, OSBL piping and Tank farm piping. - Responsible for Preparation of preliminary piping layouts referring to P&IDs, - Preparation of Nozzle orientation, clip information for vessels, tanks. - Civil Information Drawings. Issuing Layouts for modeling purpose. - Interaction with other disciplines like process, civil, electrical & instrumentation. - ID check for civil foundations, structural drawings. Support marking with special support drawings if required. - Preparation of Local foundation, Local platform drawings. Isometric check. - Stress analysis for pump suction & discharge lines as per API 610. - Cross-checking of U/G piping with A/G piping to avoid fouling. Show less



Chemplant Project Consultants, Thane, India

• Piping Engineer

  • Jul 1998 - Dec 2002

  Thane, India Self Involvement: Worked as Area Engineer for to carry out following activities • Preparation of preliminary Plot plan with the help of survey plan. Depending upon the contour, decide tentative layout for various buildings, main plant building, tank farm area etc. Approval of Plot Plan Layouts, Equipment Layouts, Utility Layouts from Client. Deciding Piping Rack Routing considering approved layouts. • Preparation of basic data sheets for various equipments, which gives preliminary… Show more Self Involvement: Worked as Area Engineer for to carry out following activities • Preparation of preliminary Plot plan with the help of survey plan. Depending upon the contour, decide tentative layout for various buildings, main plant building, tank farm area etc. Approval of Plot Plan Layouts, Equipment Layouts, Utility Layouts from Client. Deciding Piping Rack Routing considering approved layouts. • Preparation of basic data sheets for various equipments, which gives preliminary information to work out various proposals of equipment layout, utility layout. • Provide Civil Information such as layouts, weight of equipments, foundation details. • Pressure vessels / tank design (thickness) calculations. • Assistance in preparation of Statutory Approval drawings such as DISH, MIDC, CCOE. • Tank / Vessel fabrication drawings checking and approval. • Site visits to review the work till erection & commissioning of the project. • Preparation of As Build Drawings. Show less