Experience

Greenstream Sdn Bhd

• Brunei Darussalam
• Oil and Gas
• 1 - 100 Employee

• well head maintenance

  • Mar 2022 - Present

  Xmas tree & Valve Installation surface Maintenance of the Wellhead Valve changing Analysis Monitoring Pressure Testing in the Tubes Greasing/ Lubrication Rigless operations Determining issues of the Asset top side Integrity Management of the Surface Workshop Maintenance sealant pump inspection need to change the valve and then pressurize 1000 psi until 10000 psi ener pac pump inspection using A VISION about 1000 psi to 10000 psi for 10 min report some material list and calibration the pressure gauge check valve connection need to set up with hose pressure if its have leak, we need replace a new one. Show less



sahid sdn bhd

• operater cutting

  • Feb 2021 - Mar 2022

  rig up and rig down the operate cutting machine excavation until 2m until edge of cellar check pressure from a nnulas and b annulas must be 0 pressure flushing pipe from well and end of the pipe set waypoint for reduce water on to excavation set hader pipe round the cellar set up the operate cutting until conductor in 2m operate cutting must be accurate rig up and rig down the operate cutting machine excavation until 2m until edge of cellar check pressure from a nnulas and b annulas must be 0 pressure flushing pipe from well and end of the pipe set waypoint for reduce water on to excavation set hader pipe round the cellar set up the operate cutting until conductor in 2m operate cutting must be accurate



flux sdn bhd

• Malaysia
• Advertising Services
• 1 - 100 Employee

• roundstabout

  • Dec 2019 - Sep 2020

  Manage day to day rigging & slinging activities at the rig site. Conduct TBT/JHA with crew & contractors prior to starting the work. Lead daily Pre-Job Safety meetings at the start of shift. Conduct Time Out For Safety, Stop The Job & Intervene as warranted. Double hat as Rough Neck / Floor Hand on the rig floor when required. Handling BHA & preparing to lay out on the catwalk. Loading and unloading drill pipe on to and from pipe racks & staged areas containing tools, drill bits, drill collars, elevators using a front end loader. Isolate, clean, open, replace, inspect, close and return to service strainers. Assist with rig maintenance as needed. R/U & R/D of drilling rig & ensure all equipment is accounted for & stored properly after use. assist for schlumberger wireline for rig up fishing tool assist for frank international rig up manual tong and open casing from wellhead set up pipeline pressure for schlumberger cementing. operate the sickline for how many deep on the wellhead. replace some mechanical plug into the wellhead. Show less

• Mechanical Technician

  • Jun 2018 - Dec 2019

  Responsible for developing, recommending and performing preventive maintenance procedures like cleaning, vacuuming equipment, changing filters and oiling parts • Performed the tasks of testing electrical circuits and other related components using electrical test equipment • Assisted mechanic in inspecting, repaired and maintained AC and other co-related works • Handled the responsibilities of maintaining records of service schedules, temperatures, replacing and call • Assessed job sites, identifying implications, and necessary equipment. • Provided accurate job details to the Fitter. • Prepared pipes and structural steel for the welder. • Project tank 32 for tank cleaning at scot • Tugging socket wrench for tank 7510 • Loosens bolts to dismantle machinery • Cleans machines with sandpaper, solvent, and wiping rags to prepare surfaces for painting. • Rigging some lifting steelcon at KBBS (Stl) • Maintained neat and clean dock area for maintenance and repair. • Proficient with Arc and Oxy Welding, cutting, grinding and safety equipment Show less