Experience

Moskovskij Gosudarstvennyj Tehniceskij Universitet im. N.E. Baumana

• Higher Education
• 1 - 100 Employee

• Associate Professor

  • Jun 1997 - Present

  IT Technology - ISO 10303 STEP implementation, PDQ, LTDRMy educational activity is focused primarily on ISO 10303 STEP (including lectures, labs and home tasks). I use "Visual EXPRESS" by EPM Technology and my own "STEP Kit" based on my SDAI implementation in Labs and hometasks. Now I extend the field of educational activities with product data quality and long-term data retention issues. IT Technology - ISO 10303 STEP implementation, PDQ, LTDRMy educational activity is focused primarily on ISO 10303 STEP (including lectures, labs and home tasks). I use "Visual EXPRESS" by EPM Technology and my own "STEP Kit" based on my SDAI implementation in Labs and hometasks. Now I extend the field of educational activities with product data quality and long-term data retention issues.



Scientific-Engineering Center “APM”

• Programmer, not on the permanent staff

  • Nov 2003 - Present

  I had developed STEP post-processor for “APM Studio” CAD and since 2008 I being developing checker/healer for STEP models. Now this checker is SASIG PDQ-based, but I have the intention to implement ISO 10303 in checker development. Furthermore, I developed ACIS .sat postprocessor for APM Studio. Since 2012 I am developing Autodesk Inventor .ipt postprocessor. Considering low data quality of *.ipt models, the decision was made to convert internal Autodesk Inventor data to STEP with consequent healing and converting to internal APM Studio representation with just developed and tested software tools. The next planned step is development of IGES postprocessor.In 2015 I started ISO 16739 IFC implementation for APM WinMachine. The enabler of my solution is SDAI tools again. I have compiled IFC4 EXPRESS schema, got IFC data dictionary and loaded it into STEP repository.



State Scientific Educational Center of CALS technologies

• IT adviser, not on the permanent staff

  • Nov 2000 - Present

  In 2000-2001 I took part in the development of educational & training courses on CALS initiative. Since 2008 I take part in activities on STEP parts translation to Russian (This work is meaningless & useless, I believe, but it allows me to insight to the relevant state of STEP standard. In particular, I had translated ISO 10303-59 in 2011). In 2000-2001 I took part in the development of educational & training courses on CALS initiative. Since 2008 I take part in activities on STEP parts translation to Russian (This work is meaningless & useless, I believe, but it allows me to insight to the relevant state of STEP standard. In particular, I had translated ISO 10303-59 in 2011).



CAD Scientific-Research Center

• Programmer & IT advisor, not on the permanent staff

  • May 2000 - Present

  I participate in software development and in researches on product data quality, including the researches, ordered by Sukhoy Design Bureau (2006-2009). In 2007 I initiated the development of STEP viewer allowing view and investigate STEP geometry & product structure. There was intention to add the editing functionality for viewer, so this software was named "STEP CAD". This development is not completed yet due to extinction of funding. I participate in software development and in researches on product data quality, including the researches, ordered by Sukhoy Design Bureau (2006-2009). In 2007 I initiated the development of STEP viewer allowing view and investigate STEP geometry & product structure. There was intention to add the editing functionality for viewer, so this software was named "STEP CAD". This development is not completed yet due to extinction of funding.



Top Systems

• IT Services and IT Consulting
• 1 - 100 Employee

• Programmer & IT advisor, not on the permanent staff

  • Oct 1996 - Present

  Top Systems Inc., is one of Russian leaders in the field of CAD development (T-Flex CAD etc.), in 1997 the first purely Russian STEP converter was developed for T-Flex CAD with my SDAI implementation. Additionally, I developed IGES pre- & postprocessor for T-Flex CAD. Since 2000 the level of my involvement in Top Systems' activities was reduced due to I was busied hard in another projects. So, my collaboration with Top Systems is limited with consultations and periodical improvement of SDAI functionality by the orders of Top Systems. In 2012-2013 I took part in the development of RGK (Russian Geometrical Kernel). RGK was funded by Russian Federal Government, and Top Systems was the prime contractor. Definitely, my contribution was the development of STEP pre- & postprocessors for RGK.



Institute for Theoretical and Experimental Physics

• Programmer & IT advisor, not on the permanent staff

  • Mar 2006 - Dec 2008

  In 2006-2008 I took part in activities on implementing data communicating between CERN’s CAE system GEANT4 and CATIA v5 via ISO 10303 STEP. These activities were supported by the INTAS grant 06-1000012-8778. My contributions in joint efforts were: 1.STEP review where main principles of communicating had been outlined and 2. Experimental implementation of STEP pre- & post-processors for GEANT4. In 2006-2008 I took part in activities on implementing data communicating between CERN’s CAE system GEANT4 and CATIA v5 via ISO 10303 STEP. These activities were supported by the INTAS grant 06-1000012-8778. My contributions in joint efforts were: 1.STEP review where main principles of communicating had been outlined and 2. Experimental implementation of STEP pre- & post-processors for GEANT4.



Lotsia Software

• Russian Federation
• IT Services and IT Consulting
• 1 - 100 Employee

• Programmer, not on the permanent staff

  • Jun 2002 - Sep 2004

  I had developed STEP pre- & post-processors for “Lotsia PDM”-system. The both software items can be set to work with any EXPRESS-schema, i.e. STEP AP. I had developed STEP pre- & post-processors for “Lotsia PDM”-system. The both software items can be set to work with any EXPRESS-schema, i.e. STEP AP.



CALS Technology Center

• IT adviser, not on the permanent staff

  • Sep 1997 - Dec 1999

  I took part in the development of recommendations for Russian industry in data standardization domain. I carried out research on CAD interoperability with STEP & outlined STEP-based PDM system. I took part in the development of recommendations for Russian industry in data standardization domain. I carried out research on CAD interoperability with STEP & outlined STEP-based PDM system.



Scientific-Technical Society (NTO) “Integro”

• leading specialist

  • Aug 1995 - Jun 1997

  The mission of NTO “Integro” was to develop suggestion on CALS (Continuous Acquisition & Life-Cycle Support) implementation in Russian industry. I took part in software development, including software tools for STEP exchange file (ISO 10303-21) handling. Concurrently I had developed my own SDAI (Standard Data Access Interface) implementation, i.e. programming tool for STEP data processing, corresponding to ISO 10303-24 Late Binding C.This SDAI implementation was used later in some software development projects, including STEP pre&postprocessor for T-Flex CAD, STEP pre&postprocessor for Lotsia PDM, postprocessor for APM Studio CAD/CAE system.



Scientific-Research Laboratory of Moscow Power Engineering Institute (MPEI).

• Software Engineer

  • Aug 1989 - Nov 1992

  The direction of my efforts was pointed to programming implementation of ISO 10303 STEP, beingdeveloped at that time. I had interacted with Mr. Bernd Wenzel, one of initial STEP authors. At 1990 April I visited Mr. Wenzel and demonstrated him results of my programming efforts. My suggestion was to develop standard library of programs for STEP data processing, and this suggestion was adopted by Mr. Wenzel.So, it can be considered that ISO 10303-22 SDAI (Standard Data Access Interface) is my invention.



Moscow Helicopter Plant named after M.L.Mil

• leading engineer

  • Feb 1986 - Aug 1989

  My primarily responsibilities were consulting services on CAD implementation in activities of design departments. Concurrently I took part in the development of software tools for data communicating between PATRAN FEM pre-processor and ASKA FEA system. In 1987 – 1989 I collaborated with Lab 58 of Institute of Control Problems on multi-processor computer PS-2000. My primarily responsibilities were consulting services on CAD implementation in activities of design departments. Concurrently I took part in the development of software tools for data communicating between PATRAN FEM pre-processor and ASKA FEA system. In 1987 – 1989 I collaborated with Lab 58 of Institute of Control Problems on multi-processor computer PS-2000.



Central Aero-Hydrodynamic Institute named after prof. N. E. Zhukovsky (Moscow subdivision)

• engineer

  • Sep 1981 - Feb 1986

  First time my research efforts were focused on advanced multi-use space vehicles, but since establishment of CAD department at 1983 February (by prof. V. P. Lvov), CAD issues become my primarily field of activities. At 1987 CAD department was transformed to separate CAD Scientific-Research Center. First time my research efforts were focused on advanced multi-use space vehicles, but since establishment of CAD department at 1983 February (by prof. V. P. Lvov), CAD issues become my primarily field of activities. At 1987 CAD department was transformed to separate CAD Scientific-Research Center.



“Energia” Scientific-Manufacturing Corporation

• design engineer

  • Mar 1979 - Aug 1981

  I took part in the development of space vehicles I took part in the development of space vehicles