QA/QC Supervisor

• Sep 2022 - Present

QA/QC Inspector III

• Feb 2019 - Sep 2022

1. Conduct Procedure Qualification Test (PQT) for each Welding Process to establish Welding Procedure Specification2. Carry out Welders Qualification Test (WQT)3. Perform Surveillance Inspection to ensure that the construction work is performed and duly meeting the Project Specific Quality Requirements.4. Carry out Welding Control and Inspection.5. Prepare and Maintain Welding Audit Report during construction.6. Record result of inspections and maintain records of specific items as per contract/specifications.7. Administer NFI (Notice for Inspection) to Client and Third Party and coordinate for inspection as identified in the respective discipline ITP.8. Raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.9. Arrange for proper NDT Requirements as per specifications.10. Interpret RT films pertaining to Welding Joints.11. Review NDT Reports and maintain NDT Progress Status12. Generate weekly Weld Rejection Rate Summary and Weekly Welder Performance.13. Witness all testing activities as required by approved Inspection and Test plan.14. Prepare Test Packs for Piping Hydro Static Testing.15. Prepare/compile final punch list prior to delivery of the fabricated and assembled components.16. Progressive compilation of records for MDR (Final Dossiers)17. Day to day updating of job status to Head of QA/QC Department.

QA/QC Supervisor

• Sep 2016 - Sep 2018

1. Prepare and conduct Project Specific Quality Requirements Training to Production Supervisors and Sub-contractors QC Personnel.2. Establishing Work Procedures and Instructions.3. Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.4. Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.5. Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.6. Updating of Inspection status and records on daily basis.7. Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.8. Liaise with client in relation to Quality on Project Specific.9. Schedule and conduct Project Specific Quality Audit as per agreed Plan.10. Monitor the compiling of Piping Test Packages.11. Monitor administration and submission of RFI for Project.12. Prepare and maintain Weekly Weld Rejection Rate Summary.13. Monitor the issue and close-out of NCR’s for the project and maintain its register.14. Monitor progressive compilation of the MDR for the project as work progress.15. Reports directly to Quality Manager and or Asst. QA/QC Manager.

NDT Inspector/Technician Level II (Supervisor/Specialist) (RTFI/RT/UT/MT/PT)

• Sep 2012 - Jan 2016

Duties and Responsibilities•Carry out Nondestructive Test, UT (Weld Defects, Thickness Gauging, Lamination Check), RT including manual film processing and film interpretation, MT and PT (both visible and fluorescent) in accordance with the approved procedures and work instructions.•Evaluation and Interpretation of discontinuities in accordance with the applicable Codes, Standards and Project Specifications.•Preparation of NDT Procedures prior to review and approval of Level III.•Supervising and witnessing NDT Subcontractors•Ensure that the equipments used for testing are periodically calibrated and functioning to its safety regulations •Review project specifications and implementing NDT requirements•NDT Instructor/Trainer•Collate Daily Accomplishment of the Team and update job status to QA/QC Head•Preparation of daily reports for the inspections and testings carried out.

QA Engineer (Cadet)

• Aug 2012 - Oct 2012

Duties and Responsibilities•Ensures the quality records, acceptance certificates, mechanical completion certificates and the documentation for specific systems and buildings/areas are prepared and collated in accordance with project requirements•Conduct audit to ensure the implementation and continual improvement of quality system as per ISO 9001 requirements.•Prepares project requirements such as Quality Plan. Procedures, Work Instructions, Inspection and Test Plans and support documentations for the project.•Interfaces and coordinates with other departments with regards to the preparation and revision of project Procedures and Work Instructions.•Monitors the implementation of the project’s Quality Management System and reports the discrepancy, nonconformity and other deficiencies found in the process.•Prepares and reports in-process quality performance statistics.•Monitors the Department quality plan and objectives.

QA/QC Engineer (Trainee)

• Nov 2009 - Mar 2010

1. Visual and dimensional and inspection of materials2. Check correctness of the description and size of pipes, fittings and supports indicated in the detailed engineering drawing.3. Check fit up, alignment, edge preparations, welding allowance and tolerances based on WPS and customer requirements.4. Check material certification and consumable control 5. Maintain a welder’s rejection log, and records for analysis.6. Perform welding surveillance during fabrication and erection phase.7. Assist in conducting NDT Inspections8. Prepares Welding Inspection Checklist (WIC) and Quality Control Inspection Report (QCIR)9. Ensure that the job file is maintained up to date10. Perform other duties as may be assigned from time to time