Experience

Altrad Services APAC

• Australia
• Oil and Gas
• 100 - 200 Employee

• Mechanical Fitter

  • Dec 2021 - Present

  Working on Hinkley Piont C, working with a team on the installation of the blast doors project. Working on Hinkley Piont C, working with a team on the installation of the blast doors project.



Jemsar Engineering Limited

• United Kingdom
• Industrial Machinery Manufacturing
• 1 - 100 Employee

• Mechanical Fitter

  • Aug 2021 - Nov 2021

  Working on Lindsey oil refinery on a major shutdown. Removing/ installation of pipe work and manway doors and heat exchangers. Working on Lindsey oil refinery on a major shutdown. Removing/ installation of pipe work and manway doors and heat exchangers.



Bilfinger

• Germany
• Mechanical Or Industrial Engineering
• 700 & Above Employee

• Mechanical Fitter

  • Jun 2021 - Jul 2021

  Working in Teesside on Overall CF fertilizers, duties working to a safe standard obeying site and Covid 19 rules. Isolating pipe work and removing old bolts and valves, gaskets to specification and working on the fin fans renewing and tapping out for new plugs. Reinstating pipe work, valves and mesh guards around pipework. Working in Teesside on Overall CF fertilizers, duties working to a safe standard obeying site and Covid 19 rules. Isolating pipe work and removing old bolts and valves, gaskets to specification and working on the fin fans renewing and tapping out for new plugs. Reinstating pipe work, valves and mesh guards around pipework.



JENKINS AND DAVIES LIMITED

• Mechanical Fitter

  • Feb 2021 - May 2021

  Working on the Alkyls project at Pembroke Oil refinery, Working on vessels and columns installing new and old pipe work and valves , putting in isolations and removing them to box up to specification. Working on the Alkyls project at Pembroke Oil refinery, Working on vessels and columns installing new and old pipe work and valves , putting in isolations and removing them to box up to specification.



BRACSTAN INSTALLATIONS LTD

• United Kingdom
• Construction
• 1 - 100 Employee

• Mechanical Fitter

  • Jan 2021 - Feb 2021

  Working on a new Amazon new build TGW install in Washington Sunderland, installation of new conveyor’s, fitting Steel supports, fixing support legs and brackets and measuring levelling and using hand tools and power tools, and with use of scissor lifts and cherry picker. Working on a new Amazon new build TGW install in Washington Sunderland, installation of new conveyor’s, fitting Steel supports, fixing support legs and brackets and measuring levelling and using hand tools and power tools, and with use of scissor lifts and cherry picker.



Luxfer Gas Cylinders

• United States
• Industrial Machinery Manufacturing
• 200 - 300 Employee

• Mechanical Pressing Quality Engineer

  • Sep 2017 - Mar 2020

  Sub contracting to LUXFOR through my own company McGregor Engineering, Duties training staff and employees on level of quality required by the main clients also helping with everyday production. Working in a press shop environment for a press shop environment. Working on new projects . With hands-on mechanical engineering and planning and also working with tool makers and and using techniques to get the quality the best . Sub contracting to LUXFOR through my own company McGregor Engineering, Duties training staff and employees on level of quality required by the main clients also helping with everyday production. Working in a press shop environment for a press shop environment. Working on new projects . With hands-on mechanical engineering and planning and also working with tool makers and and using techniques to get the quality the best .



ENGIE Fabricom UK

• United Kingdom
• Oil and Gas
• 1 - 100 Employee

• Mechanical Fitter

  • Aug 2017 - Sep 2017

  Working on LOR oil refinery, Short shut down normal standard maintenance to valves and pipes replacing joints and cleaning faces, while working in confined spaces and at height to a safe manner Working on LOR oil refinery, Short shut down normal standard maintenance to valves and pipes replacing joints and cleaning faces, while working in confined spaces and at height to a safe manner



Engenda Group

• United Kingdom
• Industrial Machinery Manufacturing
• 200 - 300 Employee

• Mechanical Fitter

  • Mar 2017 - Aug 2017

  Working on salt end Oil Refinery site in Hull. Working on columns reinstalling new pipe work .Working to high standard and safeworking standard from drawings /permits replacing valves and installing new pipe work assemble Critical joints and boxing up vessels, taking off and boxing up Manway doors. Working on salt end Oil Refinery site in Hull. Working on columns reinstalling new pipe work .Working to high standard and safeworking standard from drawings /permits replacing valves and installing new pipe work assemble Critical joints and boxing up vessels, taking off and boxing up Manway doors.



MAM-Automation GmbH

• Austria
• Industrial Machinery Manufacturing
• 1 - 100 Employee

• Quality Engineer/pressings

  • Oct 2016 - Feb 2017

  Working in a press shop environment for an automation group call MA Automotive part Daimler Mercedes benz in Bremen Germany. Working on new projects . With hands-on mechanical engineering and planning and also working with toolmakers and and using techniques to get the quality the best . General maintenance and replacing tooling and parts Working in a press shop environment for an automation group call MA Automotive part Daimler Mercedes benz in Bremen Germany. Working on new projects . With hands-on mechanical engineering and planning and also working with toolmakers and and using techniques to get the quality the best . General maintenance and replacing tooling and parts



EDAG Group

• Germany
• Engineering Services
• 700 & Above Employee

• Quality pressing engineer

  • Aug 2016 - Oct 2016

  Working in a press shop environment for an automation group in Eisenach Germany. Working on projects for BMW RoyalsRoyce. With hands-on mechanical engineering and also working with tool makers and and using techniques to get thequality. General maintenance and changing parts and checking on control

• Quality pressing engineer

  • Jan 2016 - Aug 2016

  Working in a press shop environment for an automation group based in Eisenach Germany. Working on projects for BMW RoyalsRoyce. With hands-on mechanical engineering and also working with tool makers and and using techniques to get the quality. General maintenance and changing parts and checking on control.



Bilfinger

• Germany
• Mechanical Or Industrial Engineering
• 700 & Above Employee

• Mechanical Fitter

  • Sep 2015 - Dec 2015

  Working on allkey plant in Stanlow oil refinery. Working on Inconel pipework and steam tracing on the linavoll unit. Strip out RV and NRV and control valves working to drawings. Removing manway doors and refit with the use of a Rad gun andspanners. Installing isolation spades and pulling spades and changing spec blinds and pressure testing , reactors, tanks and pipework .Box up pipework and valves to specification to drawing and to high quality standard Working on allkey plant in Stanlow oil refinery. Working on Inconel pipework and steam tracing on the linavoll unit. Strip out RV and NRV and control valves working to drawings. Removing manway doors and refit with the use of a Rad gun andspanners. Installing isolation spades and pulling spades and changing spec blinds and pressure testing , reactors, tanks and pipework .Box up pipework and valves to specification to drawing and to high quality standard



Mech Tech Professionals

• United Kingdom
• Staffing and Recruiting
• 1 - 100 Employee

• Mechanical Fitter Supervisor

  • Jul 2015 - Aug 2015

  Sub contracting to MII engineering Working at TA TA Steel Works in Port Talbot, Supervising a team getting Permits and risk assessments and methodstatements in place. General maintenance on Pickle line renewing boogies and adjusting the height of saddles and a riggerand over head lifting equipment overall check tighten bolts renewing bush's and commissioning Sub contracting to MII engineering Working at TA TA Steel Works in Port Talbot, Supervising a team getting Permits and risk assessments and methodstatements in place. General maintenance on Pickle line renewing boogies and adjusting the height of saddles and a riggerand over head lifting equipment overall check tighten bolts renewing bush's and commissioning



ENGIE Fabricom UK

• United Kingdom
• Oil and Gas
• 1 - 100 Employee

• Mechanical Fitter

  • May 2015 - Jun 2015

  Working in Humberside on the mega- overall at Phillips 66 in the Coker's area. Hot bolting old pipe work using Hytorc equipment and flogging spanners, blinding and de-blinding Installing new pipe work and valves, bursting disk from 4'' to 30''.working on columns and vessels isolating and boxing up.(150lbs to 600lbs) Torque up to specification and tag ,Working safely to a permit and a risk assessments. Working in Humberside on the mega- overall at Phillips 66 in the Coker's area. Hot bolting old pipe work using Hytorc equipment and flogging spanners, blinding and de-blinding Installing new pipe work and valves, bursting disk from 4'' to 30''.working on columns and vessels isolating and boxing up.(150lbs to 600lbs) Torque up to specification and tag ,Working safely to a permit and a risk assessments.



Mech Tech Professionals

• United Kingdom
• Staffing and Recruiting
• 1 - 100 Employee

• Supervisor Mechanical Fitter

  • Apr 2015 - May 2015

  Sub contracting to MII working at Sleaford Steam power plant in Lincolnshire, Supervising a team getting Permits and risk assessments and methodstatements in place. General maintenance on conveyors and adjusting the height of conveyor beds and commissioning. Sub contracting to MII working at Sleaford Steam power plant in Lincolnshire, Supervising a team getting Permits and risk assessments and methodstatements in place. General maintenance on conveyors and adjusting the height of conveyor beds and commissioning.



Engenda Group

• United Kingdom
• Industrial Machinery Manufacturing
• 200 - 300 Employee

• Mechanical Fitter

  • Mar 2015 - Apr 2015

  Working in the INOES site Process cleaning overall on CM’S site. duties of work would be working to a permit and riskassessment to a safe standard. First break on chorine and sulphuric acid pipe lines from 1" to 24" 150lbs to 300lbs with the use of breathing apparatus clean off flange faces and inspected and bolt up joint with new gasket and the acquired bolts. Taking out large vessels and temperature pockets and bursting disks and reinstate according to drawing and specification of materials.



Imtech

• Belgium
• Mechanical Or Industrial Engineering
• 200 - 300 Employee

• Mechanical Fitter

  • Jan 2015 - Feb 2015

  working in Speke, Liverpool on Eli Lilly new build for TSL Pharmaceutical in countre suite Pipe fitting carbon and stainless steel spools, to isometric drawings. working in Speke, Liverpool on Eli Lilly new build for TSL Pharmaceutical in countre suite Pipe fitting carbon and stainless steel spools, to isometric drawings.



Mert Mertell

• Mechanical Fitter

  • Nov 2014 - Dec 2014

  Working in Beckton east London on gas works plant new build for Murphy's construction . Pipe fitting spools, building up pipe work to modification and installing heavy machinery and valves. Working in Beckton east London on gas works plant new build for Murphy's construction . Pipe fitting spools, building up pipe work to modification and installing heavy machinery and valves.



Mech Tech Professionals

• United Kingdom
• Staffing and Recruiting
• 1 - 100 Employee

• Mechanical Fitter

  • Oct 2014 - Nov 2014

  sub contractor to Jenkins and Davies to work on Valero oil refinery site in Pembroke on shut down project work new installation , Isolating, Removing valves, pumps, stainless steel and chrome pipe work, vessels, For inspection and Replacement, re- fit pipelines and vessels to specification and Pressure testing when required. sub contractor to Jenkins and Davies to work on Valero oil refinery site in Pembroke on shut down project work new installation , Isolating, Removing valves, pumps, stainless steel and chrome pipe work, vessels, For inspection and Replacement, re- fit pipelines and vessels to specification and Pressure testing when required.



Bilfinger

• Germany
• Mechanical Or Industrial Engineering
• 700 & Above Employee

• Mechanical Fitter

  • Sep 2014 - Oct 2014

  Working in the INOES site in Runcorn on EIP shut down and salts maintenance core team . , Isolating, Removing valves, bearings, gears, pumps, stainless steel pipe work, vessels, For inspection and Replacement, re- fit sulphur acid , chorine ,gas pipelines and vessels to specification. Removing and install bursting disk and bolt up critical joints Working in the INOES site in Runcorn on EIP shut down and salts maintenance core team . , Isolating, Removing valves, bearings, gears, pumps, stainless steel pipe work, vessels, For inspection and Replacement, re- fit sulphur acid , chorine ,gas pipelines and vessels to specification. Removing and install bursting disk and bolt up critical joints



Mech Tech Professionals

• United Kingdom
• Staffing and Recruiting
• 1 - 100 Employee

• Mechanical Fitter

  • Jul 2014 - Aug 2014

  Working at TATA Steel in Port Talbot South Wales in the hot mill on a shutdown in the blast Furness on maintenance removing rolling bearings and installing new bearings. Working at TATA Steel in Port Talbot South Wales in the hot mill on a shutdown in the blast Furness on maintenance removing rolling bearings and installing new bearings.



Bilfinger

• Germany
• Mechanical Or Industrial Engineering
• 700 & Above Employee

• Mechanical Fitter

  • Apr 2014 - Jul 2014

  Working in the INOES site CMM'S and BOC gas shut down and maintenance core. , Isolating, Removingvalves, pipe work, vessels, For inspection and Replacement, re- fit sulphur acid and chorine pipelines and vessels tospecification. Removing bursting disk and critical joints. And general maintenance in waste brine plant and mercury cell rooms

• Mechanical Fitter

  • Feb 2014 - Apr 2014

  Working in Humberside on a major overall at Phillips 66. Hot bolting old pipe work using Hytorcequipment and flogging spanners, blinding and de-blinding Installing new pipe work and valves, bursting disk from 4'' to 30'' working on columns. (150lbs to 600lbs) pipe flanges Torque up to specification and tag ,Working safely to a permit and a risk assessments and safety pasta cards



Bilfinger

• Germany
• Mechanical Or Industrial Engineering
• 700 & Above Employee

• Mechanical Fitter

  • Mar 2013 - May 2013

  Working in the INOES site in Runcorn sulphuric acid plant, removing manway doors from columns then blind andde- blinding pipes. Cutting large duct work and heavy plate work with use of grinders and oxy acetylene. Replacing valvesand general maintenance clean flange faces and replace new gaskets assemble and tag for quality. Working in the INOES site in Runcorn sulphuric acid plant, removing manway doors from columns then blind andde- blinding pipes. Cutting large duct work and heavy plate work with use of grinders and oxy acetylene. Replacing valvesand general maintenance clean flange faces and replace new gaskets assemble and tag for quality.



Tratos

• United Kingdom
• Appliances, Electrical, and Electronics Manufacturing
• 1 - 100 Employee

• Mechanical fitter welder/maintenance engineer

  • Jan 2013 - Mar 2013

  Woking in a large full production factory that produces copper cable for Railways and other industries. Workingwith a small group people that work on the maintenance department my day to day roles are production breakdowns,refurbishment, repair and metal fabrication and welding all round the factory from guards to platforms, gates and barriers forthe saftey of a 24 hour production work force Woking in a large full production factory that produces copper cable for Railways and other industries. Workingwith a small group people that work on the maintenance department my day to day roles are production breakdowns,refurbishment, repair and metal fabrication and welding all round the factory from guards to platforms, gates and barriers forthe saftey of a 24 hour production work force



PRO FLOW PIPE LTD

• Mechanical Fitter/Plater Welder

  • Sep 2012 - Jan 2013

  Mechanical fitting pulling spades, replacing gaskets and pipe work and fabricating brackets and heavyfabrication projects on working sites With the use of a cherry picker and scissor lift mechanical fitting structural steel workand pipework on high platforms Mechanical fitting pulling spades, replacing gaskets and pipe work and fabricating brackets and heavyfabrication projects on working sites With the use of a cherry picker and scissor lift mechanical fitting structural steel workand pipework on high platforms



Centreline Machine Guards Ltd

• United Kingdom
• Machinery Manufacturing
• 1 - 100 Employee

• Mechanical Fitter

  • Aug 2012 - Sep 2012

  Installation new platforms and high speed rollers and weld booths and conveyors. General maintenance inautomation stations in Land Rover (Solihull) for Fabricating platforms and assembling machine guards for robot cells usingwelding and mechanical fitting skills Installation new platforms and high speed rollers and weld booths and conveyors. General maintenance inautomation stations in Land Rover (Solihull) for Fabricating platforms and assembling machine guards for robot cells usingwelding and mechanical fitting skills



VDL Steelweld

• Netherlands
• Motor Vehicle Manufacturing
• 200 - 300 Employee

• Mechanical Fitter/ Welder

  • Apr 2012 - Aug 2012

  Installation new tooling kits and commissioning for a new project in BIW (body shop 1). General maintenanceand new build in automation stations in Land Rover (Solihull) .Fabricating platforms and assembling, fitting machine guardsfor robot cells using welding and fitting techniques, pneumatic Lines for robots Installation new tooling kits and commissioning for a new project in BIW (body shop 1). General maintenanceand new build in automation stations in Land Rover (Solihull) .Fabricating platforms and assembling, fitting machine guardsfor robot cells using welding and fitting techniques, pneumatic Lines for robots



Comau

• Italy
• Automation Machinery Manufacturing
• 700 & Above Employee

• Mechanical Fitter/ Welder

  • Jan 2012 - Apr 2012

  Duties held; installation new tooling kits and commissioning for a new project. General maintenance in automation stationsin Land Rover (Solihull) JLR. Fabricating platforms and assembling machine guards for robot cells using welding skills and mechanical fitting skills. Duties held; installation new tooling kits and commissioning for a new project. General maintenance in automation stationsin Land Rover (Solihull) JLR. Fabricating platforms and assembling machine guards for robot cells using welding skills and mechanical fitting skills.



Magna International

• Canada
• Motor Vehicle Manufacturing
• 700 & Above Employee

• Quality Control Engineer

  • Feb 2011 - Feb 2012

  Duties held; Working on Bentley GT Continental and Mercedes AMG, Aston Martin(doors and hoods)Teaching employees Metal finishing/Sheetmetal skills on skin body panels from (aluminium) a SPF(Super panel forming) process. Which involves high of inspection withhigh - light oil and using a stone and hand techniques to find SPF lines and pimples, dents, lows and high spots in thefinished panel. Using skills and hand tools , sanding equipment A - Class finish is then applied

• Quality Engineer /Pressing engineer

  • May 2010 - Feb 2011

  Duties held; Working as a sub contractor for one of Europe's biggest prototype and motorcar manufactures in Austria Gleisdorf Magna Heavy Stamping.quality engineering and pressing work on skin body panels on Aston Martin Rapid and MercedesSLS AMG sports cars. Work involved using orbiters and finishing handTools such as finishing hammers , files , air tools on light gaugealuminium and mild steel body panels and doors to high qualityInspection (high light) using stone, oil and lights.



Connect 4 Engineering

• United Kingdom
• Staffing and Recruiting
• 1 - 100 Employee

• Mechanical fitter/Welder

  • Jan 2010 - May 2010

  Duties held; Working at GlaxoSmithKline in Gloucestershire. Installation of stainless steel conveyers' TIG Welding andfabricating Brackets and other forms of designs for a ongoing production line. Fitting Plastic chain and tracks throughout theplant and general mechanical maintenance and conveyor systems Duties held; Working at GlaxoSmithKline in Gloucestershire. Installation of stainless steel conveyers' TIG Welding andfabricating Brackets and other forms of designs for a ongoing production line. Fitting Plastic chain and tracks throughout theplant and general mechanical maintenance and conveyor systems



Comau

• Italy
• Automation Machinery Manufacturing
• 700 & Above Employee

• Mechanical fitter / Welder

  • Jan 2009 - Dec 2009

  Duties; Working at Bentley cars site in Crewe and the NISSAN car plant and Unipres press shop plant in Sunderland.Assembling KBK rail (DEMAG) on car assembly areas.Fabricating/weld (ARC) Working platforms and handrail supportsStructural support beams for inside the building, removing Old machinery and tooling, jigs, pipework from areas.BalancingStud welders and other tools for ongoing production. Installing Cranes and tooling workstations. . Relocating robots and jigs Duties; Working at Bentley cars site in Crewe and the NISSAN car plant and Unipres press shop plant in Sunderland.Assembling KBK rail (DEMAG) on car assembly areas.Fabricating/weld (ARC) Working platforms and handrail supportsStructural support beams for inside the building, removing Old machinery and tooling, jigs, pipework from areas.BalancingStud welders and other tools for ongoing production. Installing Cranes and tooling workstations. . Relocating robots and jigs



EDWARDS ENGINEERING LTD

• Mechanical fitter welder

  • May 2008 - Jan 2009

  Duties; Site maintenance on in inospec chemical sites , fiddlers ferry power plant, united utilities, food and Beverage plants.General maintenance on high powered conveyor systems and Hand railing, platforms and structural steel Work using MIG,and ARC welding on site and in a fabrication shop. Mechanical fitting heavy fabrication projects and installing machineryusing safety procedures. Duties; Site maintenance on in inospec chemical sites , fiddlers ferry power plant, united utilities, food and Beverage plants.General maintenance on high powered conveyor systems and Hand railing, platforms and structural steel Work using MIG,and ARC welding on site and in a fabrication shop. Mechanical fitting heavy fabrication projects and installing machineryusing safety procedures.



Shearfab Ltd

• United Kingdom
• Industrial Machinery Manufacturing
• 1 - 100 Employee

• Mechanical fitter/ fabricator welder

  • Oct 2005 - May 2008

  Making bus bar control panels and electrical enclosuresWith use of MIG, TIG, stud welding equipment and making other forms of Fabrication. Working with high standard ofDrawing's from freehand, AutoCAD, solid works, on shop/site Work in power plants and united utilities site Making bus bar control panels and electrical enclosuresWith use of MIG, TIG, stud welding equipment and making other forms of Fabrication. Working with high standard ofDrawing's from freehand, AutoCAD, solid works, on shop/site Work in power plants and united utilities site



MAF Engineering (UK) LTD

• United Kingdom
• Industrial Machinery Manufacturing

• Mechanical fitter/ Plater Welder

  • Apr 2005 - Oct 2005

  Working in Castle cement in Padeswood (North Wales)And working on a plant shut down in Sonae(Liverpool England), hand railing, sheet metal work, maintenance repair, And structural steel work using MIG, ARC welding,Mechanical fitting valves and replacing pipework and installation work new and old fabrication work. Working in Castle cement in Padeswood (North Wales)And working on a plant shut down in Sonae(Liverpool England), hand railing, sheet metal work, maintenance repair, And structural steel work using MIG, ARC welding,Mechanical fitting valves and replacing pipework and installation work new and old fabrication work.



East West Engineering

• Australia
• Mechanical Or Industrial Engineering
• 1 - 100 Employee

• Mechanical fitter/boilermaker

  • Aug 2004 - Feb 2005

  Mechanical fitter/boilermakerDuties; Fabricating forklift attachments from Engineering drawings , With the use of marking out equipment working from1st and 3rd angle projection drawings and using a brake press and guillotine machines and MIG welding equipment. Mechanical fitting hydraulic pumps and Connectors Mechanical fitter/boilermakerDuties; Fabricating forklift attachments from Engineering drawings , With the use of marking out equipment working from1st and 3rd angle projection drawings and using a brake press and guillotine machines and MIG welding equipment. Mechanical fitting hydraulic pumps and Connectors



Sydney ship repair

• Mechanical Fitter/ boilermaker

  • Jun 2004 - Aug 2004

  ; Repairing boats from the hull to other parts, cutting out usingPlasma and oxy- acetylene, welding aluminium and mild steelWith MIG, ARC. Mechanical fitting new valves and pipe work ; Repairing boats from the hull to other parts, cutting out usingPlasma and oxy- acetylene, welding aluminium and mild steelWith MIG, ARC. Mechanical fitting new valves and pipe work



Shearfab Ltd

• United Kingdom
• Industrial Machinery Manufacturing
• 1 - 100 Employee

• Apprentice Mechanical Fitter/Welder

  • Jan 2000 - Feb 2004

  Apprentice Fabricator Welder fitterDuties; Training towards City and Guilds 2 and 3 in mechanical Engineering, Training on the shop floor in Electrical controlpanels and other Forms of fabrication, MIG welding and ARC welding And finishing using orbital sanders to a high quality ,Mechanical fitting and technical engineering in automotive and power industries. Apprentice Fabricator Welder fitterDuties; Training towards City and Guilds 2 and 3 in mechanical Engineering, Training on the shop floor in Electrical controlpanels and other Forms of fabrication, MIG welding and ARC welding And finishing using orbital sanders to a high quality ,Mechanical fitting and technical engineering in automotive and power industries.



Jaguar Cars limited

• Trainee Apprentice

  • Nov 1999 - Jan 2000

  Training in NVQ level 2 Engineering, EngineeringModern Apprenticeship Engineering Certificate Training in NVQ level 2 Engineering, EngineeringModern Apprenticeship Engineering Certificate



Ford Motor Company

• United States
• Motor Vehicle Manufacturing
• 700 & Above Employee

• Trainee Apprentice

  • Nov 1999 - Nov 1999

  Training in NVQ level 2 Engineering Manufacture Training in NVQ level 2 Engineering Manufacture