Experience

MiCROTEC - Innovating Wood

• Italy
• Appliances, Electrical, and Electronics Manufacturing
• 200 - 300 Employee

• Chief Technology Officer

  • Dec 2020 - Present

  I am leading the R&D department at Microtec in Linköping I am leading the R&D department at Microtec in Linköping



Prodaptor AB

• Sweden
• Automation Machinery Manufacturing

• Chief Executive Officer

  • Oct 2019 - Present

  Prodaptor is a consulting company active in applied measurement technology for the process industry. The company has expertise in optical measuring instruments applied in the process industry as well as international marketing and complex sales, technical development, environmental protection and steel / metal manufacturing. Prodaptor can provide services for eg: • Project management to solve measurement tasks and integrate measurement systems for control and/or quality… Show more Prodaptor is a consulting company active in applied measurement technology for the process industry. The company has expertise in optical measuring instruments applied in the process industry as well as international marketing and complex sales, technical development, environmental protection and steel / metal manufacturing. Prodaptor can provide services for eg: • Project management to solve measurement tasks and integrate measurement systems for control and/or quality assurance • Support during specification, procurement, development and integration of measurement and inspection systems • Sounding board to find systems and solutions for e.g. dimensional measurement and defect detection Show less Prodaptor is a consulting company active in applied measurement technology for the process industry. The company has expertise in optical measuring instruments applied in the process industry as well as international marketing and complex sales, technical development, environmental protection and steel / metal manufacturing. Prodaptor can provide services for eg: • Project management to solve measurement tasks and integrate measurement systems for control and/or quality… Show more Prodaptor is a consulting company active in applied measurement technology for the process industry. The company has expertise in optical measuring instruments applied in the process industry as well as international marketing and complex sales, technical development, environmental protection and steel / metal manufacturing. Prodaptor can provide services for eg: • Project management to solve measurement tasks and integrate measurement systems for control and/or quality assurance • Support during specification, procurement, development and integration of measurement and inspection systems • Sounding board to find systems and solutions for e.g. dimensional measurement and defect detection Show less



Shapeline

• Sweden
• Mining
• 1 - 100 Employee

• President and Vice president - Marketing and Sales

  • Mar 2000 - Oct 2019

  In year 2000, I started Shapeline AB together with a couple of friends and colleagues. For the first 10 years, I worked as a sales CEO, but also a lot with development and production. We understood early the importance of understanding the users and involving them in product development. As a result, reliability, ease of use and serviceability became important concepts, something that would later prove to be necessary requirements for growth. Since flatness measurement is a narrow niche, we… Show more In year 2000, I started Shapeline AB together with a couple of friends and colleagues. For the first 10 years, I worked as a sales CEO, but also a lot with development and production. We understood early the importance of understanding the users and involving them in product development. As a result, reliability, ease of use and serviceability became important concepts, something that would later prove to be necessary requirements for growth. Since flatness measurement is a narrow niche, we soon expanded internationally with Germany as the first export market. I established sales channels and spent a lot of time with customers in Germany, which led to Germany becoming Shapeline's most important market for the first years, but the expansion soon continued outside Europe. In 2011, we hired an external CEO and as sales and marketing manager, I focused on expanding and developing the sales organization with a lot of customer visits together with representatives. We had agents and distributors in 15 countries and a self-employed salesperson in China. Throughout the entire time at Shapeline, I was active in the board of directors as well as in the management team. During this time, I was also the initiator and team-leader of several development projects that have been further developed and has made the company a world leader in its niche. The direct collaboration with the end users has resulted in products which have quickly proved to be useful and accepted by the demanding metal industry. Together with SSAB, I also started the development of a measurement system for hot rolling mills, an extreme challenge for optical instruments. The result is “VeriShape”, the most promising product of Shapeline today. I have worked with the establishment, development and replacement of agents and distributors in many countries in 4 continents for 20 years. I enjoy international contacts and the mix of challenging measurement technology and the world as a field of work. Show less In year 2000, I started Shapeline AB together with a couple of friends and colleagues. For the first 10 years, I worked as a sales CEO, but also a lot with development and production. We understood early the importance of understanding the users and involving them in product development. As a result, reliability, ease of use and serviceability became important concepts, something that would later prove to be necessary requirements for growth. Since flatness measurement is a narrow niche, we… Show more In year 2000, I started Shapeline AB together with a couple of friends and colleagues. For the first 10 years, I worked as a sales CEO, but also a lot with development and production. We understood early the importance of understanding the users and involving them in product development. As a result, reliability, ease of use and serviceability became important concepts, something that would later prove to be necessary requirements for growth. Since flatness measurement is a narrow niche, we soon expanded internationally with Germany as the first export market. I established sales channels and spent a lot of time with customers in Germany, which led to Germany becoming Shapeline's most important market for the first years, but the expansion soon continued outside Europe. In 2011, we hired an external CEO and as sales and marketing manager, I focused on expanding and developing the sales organization with a lot of customer visits together with representatives. We had agents and distributors in 15 countries and a self-employed salesperson in China. Throughout the entire time at Shapeline, I was active in the board of directors as well as in the management team. During this time, I was also the initiator and team-leader of several development projects that have been further developed and has made the company a world leader in its niche. The direct collaboration with the end users has resulted in products which have quickly proved to be useful and accepted by the demanding metal industry. Together with SSAB, I also started the development of a measurement system for hot rolling mills, an extreme challenge for optical instruments. The result is “VeriShape”, the most promising product of Shapeline today. I have worked with the establishment, development and replacement of agents and distributors in many countries in 4 continents for 20 years. I enjoy international contacts and the mix of challenging measurement technology and the world as a field of work. Show less



Epact Technology

• Business area manager

  • 1995 - 1999

  After my dissertation, I started a business area in optical measurement technology at the consulting company Epact Technology. I was actively looking for challenges in the industry that could be solved with vision technology, with productization mind from the beginning. It was a very educational time when I learned to analyze and evaluate industrial measurement and inspection problems and solve them with a team of skilled engineers. Some important lessons were to understand the end user's… Show more After my dissertation, I started a business area in optical measurement technology at the consulting company Epact Technology. I was actively looking for challenges in the industry that could be solved with vision technology, with productization mind from the beginning. It was a very educational time when I learned to analyze and evaluate industrial measurement and inspection problems and solve them with a team of skilled engineers. Some important lessons were to understand the end user's process, mindset and how they make money. This led to us eventually focusing on flatness measurement for the steel and metal industry, an area where we could see multiplicity possibilities and really add something new. During this time, I worked with product development, algorithms and team-leading, but also with business development and complex technical sales. Show less After my dissertation, I started a business area in optical measurement technology at the consulting company Epact Technology. I was actively looking for challenges in the industry that could be solved with vision technology, with productization mind from the beginning. It was a very educational time when I learned to analyze and evaluate industrial measurement and inspection problems and solve them with a team of skilled engineers. Some important lessons were to understand the end user's… Show more After my dissertation, I started a business area in optical measurement technology at the consulting company Epact Technology. I was actively looking for challenges in the industry that could be solved with vision technology, with productization mind from the beginning. It was a very educational time when I learned to analyze and evaluate industrial measurement and inspection problems and solve them with a team of skilled engineers. Some important lessons were to understand the end user's process, mindset and how they make money. This led to us eventually focusing on flatness measurement for the steel and metal industry, an area where we could see multiplicity possibilities and really add something new. During this time, I worked with product development, algorithms and team-leading, but also with business development and complex technical sales. Show less



Linköping University

• Sweden
• Higher Education
• 700 & Above Employee

• PhD Student

  • Jan 1987 - May 1995

  After finishing my master in technology, I continued as a PhD-student within the area of applied optical measurement technology and image processing. Since the doctoral studies were done at Assembly Technology at IKP (Institution for Construction and Production), I also got in contact with manufacturing industry. During this time, I developed an ability to find innovative solutions based in image processing and optical measurement technology, but also to generalize and analyze the results. This… Show more After finishing my master in technology, I continued as a PhD-student within the area of applied optical measurement technology and image processing. Since the doctoral studies were done at Assembly Technology at IKP (Institution for Construction and Production), I also got in contact with manufacturing industry. During this time, I developed an ability to find innovative solutions based in image processing and optical measurement technology, but also to generalize and analyze the results. This has been of great benefit throughout my professional career. In 1990-91 I was a guest researcher at Monash University in Australia. I also ran my own company, Capaki Data during this time. Capaki Data developed C-based applications for various customers. Show less After finishing my master in technology, I continued as a PhD-student within the area of applied optical measurement technology and image processing. Since the doctoral studies were done at Assembly Technology at IKP (Institution for Construction and Production), I also got in contact with manufacturing industry. During this time, I developed an ability to find innovative solutions based in image processing and optical measurement technology, but also to generalize and analyze the results. This… Show more After finishing my master in technology, I continued as a PhD-student within the area of applied optical measurement technology and image processing. Since the doctoral studies were done at Assembly Technology at IKP (Institution for Construction and Production), I also got in contact with manufacturing industry. During this time, I developed an ability to find innovative solutions based in image processing and optical measurement technology, but also to generalize and analyze the results. This has been of great benefit throughout my professional career. In 1990-91 I was a guest researcher at Monash University in Australia. I also ran my own company, Capaki Data during this time. Capaki Data developed C-based applications for various customers. Show less



Ericsson Information Systems AB

• Test programmer

  • Jun 1982 - Aug 1983

  Programmed incircuit test systems for computer hardware (PCB:s) Programmed incircuit test systems for computer hardware (PCB:s)