Experience

CEG International

• Qatar
• Architecture and Planning
• 300 - 400 Employee

• Quality Manager

  • Feb 2021 - Present

  1. Develop QMS and ensure implementation including PWA requirements for CEG and their contractor at three projects 2. Management of Monthly KPI, Quarterly Assessment and Yearly Reports for all discipline and reporting for Quality Department 3. QHSE System, compliance and Product Audits on main contractor, suppliers, subcontractors and third-party laboratories 4. Perform site visits and walks, raise and close SOR/NCR from Contractor, GEC and stakeholders. 5. Responsible to ensure the processes needed for Project QMS are established, implemented and maintained. 6. Responsible for carrying out QA Audits against project / contract PQPs, and checking to ensure the QA processes and procedures are being followed 7. Participate in Quality audits conducted by the PWA to verify the implementation and maintenance of the QMS 8. Establishes and enforces an effective project quality control procedure and ensures that they are audited in accordance with the contract requirements 9. Submit for review a proposed corrective and preventive action plan within 14 days of notification upon receipt of CAR/ NCR by the PWA after coordination with relevant discipline in-charge or contractor 10. Manages the Non-Conformance Registers and reports only monthly basis to RPD. 11. Allocates the responsibilities related to closure of NCRs and collection of evidence to relevant discipline in-charge or contractor team members and complies them for closure. 15. Reports PD and SRE for any short fall on quality aspect of project or closure of Nonconformities for further action. 16. Ensure the satisfactory corrective action has been taken to eliminate the cause of suspension of any defective works 17. Hold Site Quality Meetings on a regular basis throughout the duration of the work. 18. Review and approve all Contractors PQP and supporting procedures 19. Prepares lesson learned based on critical site issues and circulates all across the projects after approval from SRE. Show less



Bureau Veritas Group

• France
• Environmental Services
• 700 & Above Employee

• Sr. Civil Engineer/ QA Manager

  • Nov 2015 - Feb 2021

  -Also Responsible for developing & updating project quality plan and integrating the same following company’s existing QMS and Quality Manual including control system for documentation for implementation of QMS on the project including QHSE Plan and Procedures. -Setting out and measurement of Project QA/QC Objectives and helping relevant department to set their QMS objective including management of KPI's -Ensuring update of daily, weekly and monthly reports to project management, client and interested parties -Qualitative Risk Analysis for project processes & reporting -Controlling inspection requests through verification of documents and site activity before submission to consultant -Preparation & response to QMS related contractual correspondences -Following up with Architectural, Civil, Infrastructure, Asphalt and MEP subcontractors to ensure that QA/QC Requirements are met and adequate authority coordination is done for approval of completed works -Leading field inspection & visits with stakeholders & interested parties for site related issues & spot resolution -Control Internal and external audits -Manage of timely closer of nonconformities (NCR) either internal or external by QD-SBG client -Issuance and closure of internal & external QHES NCRs ensuring adequate root cause, correction and corrective actions. -Preparation, review and approval of ITP ensuring its implementation for site inspection and material testing -Creating, presenting and coordinating QA/QC trainings to project staff, stakeholders & interested parties -Shouldering the responsibilities of project closeout and related coordination with reference to contractual, legal and special requirements -Participating & chairing meetings related to progress, QAQC, testing and commissioning and project handing over -Preparation of Lessons Learned, Dash Boards and PARs to avoid recurrence of deviations Show less



SPIG COOLING TOWERS INDIA PRIVATE LIMITED

• India
• Oil and Gas
• 1 - 100 Employee

• Civil Engineering Manager

  • Jul 2013 - May 2015

  1. Responsible for overall Civil Engineering design, procurement and construction activity related to cooling towers all across India 2. Liaised with client regarding civil contractual issues during bid and execution stage 3. Supported Marketing Department by analyzing project scope of work and providing initial bid information 4. Study tender documents and prepare cost break down for civil construction activity considering machine, material and manpower requirements 5. Evaluated project civil engineering scope and prepared narratives for Design Engineering Team and performed Design QC checks on the same 6. Collaborated with contractor, client, consultant and design team regarding progress and deliverable submission 7. Carry out design review and suggest improvement in the civil and structural execution sequence for cost savings without affecting quality of work 8. Ensure and approve MEP requirements are considered in the civil design 9. Propose construction methods and repair methods, prepare Standard Operating Procedures and ITPs, select material and subcontractor related to civil work 10. Performed quality audit of design, QC document, material inwards checking, quality certificates validation, inspection test protocols, method statement and construction documents 11. Provide external civil inspection support to client by periodic supervision of their civil contractor to confirm construction is according to design. 12. Oversee the completed cooling towers by client and ensure its structural integrity before taking over for MEP installation. 13. Ensured issuance and closure of Nonconformance Report (NCR), Site Observation Report Quality (SOQ) and Quality Punch List Report 14. Assured closer of client issued non-conformities during work progress or audit of client 15. Provided external civil inspection support to client by periodic supervision to confirm construction is according to design Show less



AREVA SOLAR INDIA PRIVATE LIMITED

• Utilities

• Asst. QA/QC Manager – Civil

  • Jun 2012 - Jun 2013

  1. Study the engineering drawings related to Civil, MEP, Instrumentation, etc. for defining construction sequence and stage of inspection 2. Prepare ITP for each type of activity based on method of construction, specification requirements, material requirements, and design documents 3. Approve and ensure that subcontractor’s detailed construction program includes requirement of machine, material and manpower to satisfy all the quality requirements related to jobs. 4. Responsible to identify changes in design considering site situation and changes in local authority requirements and update construction team for the same to facilitate operations 5. Responsible to design various concrete mixes for substructure and superstructure considering design requirements, findings of geotechnical investigation 6. Propose cost effective alternative methods and materials for repairs of concrete and structural issues based on engineering calculations 7. Perform Inspecting Batching Plant, materials inspection and verification, monitor process of concreting from plant to placement, visit of source for material including quarries for selection of materials and generate quality reports 8. Responsible for quality of all civil works including sub structure and super structure, checking of site construction activities, field and laboratory test verification. 9. Carryout geotechnical investigation with Third party laboratory and certify the final report and perform various geotechnical test to certify compaction of soil and perform various pile load test to validate the design report calculations 10. Lead the testing and commission process before final handover, issue Punch list report and generate testing and commission report before final handover 11. Narrate QA/QC Team and subcontractors on daily basis related to construction quality requirement for day’s construction activity and delegate responsibility for each work area Show less



Highland-Al-Hujaz Co. Ltd.

• Afghanistan

• Quality Control Manager and Design Coordinator

  • May 2010 - Apr 2012

  1. Coordinate with project designer and study design calculations and drawings to ensure that they fulfill project contract requirements 2. Perform duties of Project Manager in absence of him. 3. Narrate project construction team and project manager about finalized design and respond back to designer for necessary changes as and when needed based on site construction requirements 4. Supervise and maintain the project quality within the cost limit of each definable feature of work 5. Coordinate with Suppliers/ subcontractor for selection of materials based on approved BOQ, 6. Inform HLH Construction Department of any potential claim which should be pursued with AED due to delays and/or cost overruns which are no fault of HLH 7. Supervise various Task Orders given by USACE and inform construction team and subcontractors to make changes in the construction sequence. Ensure that these changes are implemented on site without affecting the original construction programme. 8. Carry out optimization and quality check review of design and details on materials, fabrication time, and constructability 9. Coordinate with Hydrology surveyor, civil surveyor and geotechnical investigation team for site progress, evaluate their reports for adequacy and submit to AED for approval 10. Develop Project Quality Plan referring to company quality manual, contact documents and Unified Facility Guide Specification (UFGS) for construction works. 11. Develop of Standard Operating Procedure and Inspection and Test Plan for the contract line items and providing training on the same to subcontractors. 12. Perform and approve inspection of materials delivered to site before submitting to USACE and using for construction work Show less



Ace Infoway Pvt. Ltd.

• United States
• Information Technology & Services
• 200 - 300 Employee

• Civil Production and Design Head

  • Mar 2008 - May 2010

  1. Liaise with client to understand their needs and standard requirements for fulfillment of technical and design requirements of the project. 2. Coordinate and guide marketing team on technical and commercial issues to get new projects 3. Responsible to take monthly inventory of the projects done, their financial value, time required to finish the task / project and if delayed then identify and propose mitigation measure for better budgetary control of design process 4. Study the geophysical and geotechnical data, location, needs of project, budget requirements and time constrains to complete the project, etc. provided by client to define basis of design for Civil, Architectural, Structural and MEP designs as applicable. 5. Responsible to assign duties and supervise the quality of design and drafting work to respective discipline of Civil, Structure, Architectural and MEP design 6. Responsible to take independent decisions of design problems to ensure effectiveness and economy of the design 7. Evaluate the design completed by staff and make necessary changes to have optimized design for cost saving 8. Manage Engineer/Draftsmen excluding external designers for various Architectural, Civil, Structural, MEP and Modelling projects 9. Ensure that Bill of Material, BOQ, Bar Bending Schedules are extracted from finalized design and submitted to client on time 10. Design project element using BIM software like Revit, ArchiCAD and Chief Architect and resource load the model based on LOD requirements as per progress of design and construction stage 11. Prepare hydrology design of Lots based on precipitation, runoff and ground recharge requirements 12. Prepare grading plans for projects considering buildings pads, roads, landscape and hardscape features, parking requirements, etc. Show less



Kalol Institute of Technology and Research Center

• Gujarat, India

• Lecturer - Civil Department

  • Jul 2006 - Feb 2008

  Lecturer and I/C Head of Civil Engineering Department Lecturer and I/C Head of Civil Engineering Department



Anviksha Consultants - India

• India
• Civil Engineering
• 1 - 100 Employee

• Civil Engineer

  • Jul 2004 - Jul 2006

  1. Project Site Inspection of ongoing works 2. Preparation of Structural Drawings 3. Building Material Take Off 4. Preparation of bar bending schedules 1. Project Site Inspection of ongoing works 2. Preparation of Structural Drawings 3. Building Material Take Off 4. Preparation of bar bending schedules