Muhammad Muslim
QA/QC Engineer at Shanghai Electric Group Co., Ltd- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
-
English -
-
Hindi -
-
Punjabi -
-
Urdu -
Topline Score
Bio
Engr. Zain Mehmood
I Found Mr.Muslim Ali well experienced and keen towards work assigned to him. His potential knowledge in the work is substantial. I wish him all the success in his personal and professional life.
Ghulam Jabir
Mr.Muslim a detail oriented and target oriented person that i have seen so far.Always been a motivation for his colleagues.He has a strong decision making power.A part from his professional decorum,he is kind, very cooperative and always been helpful to his colleagues.It has been an honor working with him and i wish him the best for his future endeavor.
Engr. Zain Mehmood
I Found Mr.Muslim Ali well experienced and keen towards work assigned to him. His potential knowledge in the work is substantial. I wish him all the success in his personal and professional life.
Ghulam Jabir
Mr.Muslim a detail oriented and target oriented person that i have seen so far.Always been a motivation for his colleagues.He has a strong decision making power.A part from his professional decorum,he is kind, very cooperative and always been helpful to his colleagues.It has been an honor working with him and i wish him the best for his future endeavor.
Engr. Zain Mehmood
I Found Mr.Muslim Ali well experienced and keen towards work assigned to him. His potential knowledge in the work is substantial. I wish him all the success in his personal and professional life.
Ghulam Jabir
Mr.Muslim a detail oriented and target oriented person that i have seen so far.Always been a motivation for his colleagues.He has a strong decision making power.A part from his professional decorum,he is kind, very cooperative and always been helpful to his colleagues.It has been an honor working with him and i wish him the best for his future endeavor.
Engr. Zain Mehmood
I Found Mr.Muslim Ali well experienced and keen towards work assigned to him. His potential knowledge in the work is substantial. I wish him all the success in his personal and professional life.
Ghulam Jabir
Mr.Muslim a detail oriented and target oriented person that i have seen so far.Always been a motivation for his colleagues.He has a strong decision making power.A part from his professional decorum,he is kind, very cooperative and always been helpful to his colleagues.It has been an honor working with him and i wish him the best for his future endeavor.
Credentials
-
ISO 9001:2015 Lead Auditor - Quality Certification
ACS GP ( American Certification Services )Apr, 2023- Oct, 2024 -
CSWIP 3.2.2 Senior Welding Inspector (License No 683664)
TWIJan, 2022- Oct, 2024 -
CSWIP 3.1 Welding Inspector
TWIJan, 2015- Oct, 2024 -
ASNT NDT Level II Certification - (MT) (ASNT-NDT2-MT)
ASNT (The American Society for Nondestructive Testing) -
ASNT NDT Level II Certification - (RT) (ASNT-NDT2-RT)
ASNT (The American Society for Nondestructive Testing) -
ASNT NDT Level II Certification - Liquid Penetrant Testing (PT) (ASNT-NDT2-PT)
ASNT (The American Society for Nondestructive Testing) -
ASNT NDT Level II Certification - Ultrasonic Testing (UT) (ASNT-NDT2-UT)
ASNT (The American Society for Nondestructive Testing) -
Driving License
Dubai United Arab Emirates (UAE)
Experience
-
Shanghai Electric Group Co., Ltd
-
Mechanical Or Industrial Engineering
-
700 & Above Employee
-
QA/QC Engineer
-
Oct 2020 - Present
• Conducted analyses of both in-process and completed welding of SS/CS materials, components, and products. • Drafted technical documents such as deviation reports, testing protocol and trend analyses. • Conducted investigations into questionable test results. • Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process. • Interpreted test results by comparing to established… Show more • Conducted analyses of both in-process and completed welding of SS/CS materials, components, and products. • Drafted technical documents such as deviation reports, testing protocol and trend analyses. • Conducted investigations into questionable test results. • Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process. • Interpreted test results by comparing to established specifications and control limits, making recommendations on appropriateness of data for release. • Reviewed and validated quality requirements for manufacturing planning, supplier purchase orders and engineering specifications to meet contract compliance regulations. • Completed supporting documentation for testing procedures, including data capture forms, equipment logbooks and inventory forms. • Identified and resolved variances to bring products in line with requirements. . Preparation / Review of procedures, ITP, WPS Show less • Conducted analyses of both in-process and completed welding of SS/CS materials, components, and products. • Drafted technical documents such as deviation reports, testing protocol and trend analyses. • Conducted investigations into questionable test results. • Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process. • Interpreted test results by comparing to established… Show more • Conducted analyses of both in-process and completed welding of SS/CS materials, components, and products. • Drafted technical documents such as deviation reports, testing protocol and trend analyses. • Conducted investigations into questionable test results. • Determined root cause of deviations and non-conforming results and implemented appropriate corrective and preventive actions throughout product development process. • Interpreted test results by comparing to established specifications and control limits, making recommendations on appropriateness of data for release. • Reviewed and validated quality requirements for manufacturing planning, supplier purchase orders and engineering specifications to meet contract compliance regulations. • Completed supporting documentation for testing procedures, including data capture forms, equipment logbooks and inventory forms. • Identified and resolved variances to bring products in line with requirements. . Preparation / Review of procedures, ITP, WPS Show less
-
-
-
Chemchina Petrochemical Corporation
-
Dubai, United Arab Emirates
-
Quality Control Engineer
-
Feb 2020 - Oct 2021
• Adhered to safety and clean area procedures to comply with agency and regulatory mandates. • Developed and audited practices, programs, and reporting system metrics for optimal efficiency. • Conducted data review and followed standard practices to find solutions. • Performed visual assessment of products to evaluate conformance with quality standards. • Inspected welding joints and compared against standards to meet regulatory requirements. • Documented and executed detailed… Show more • Adhered to safety and clean area procedures to comply with agency and regulatory mandates. • Developed and audited practices, programs, and reporting system metrics for optimal efficiency. • Conducted data review and followed standard practices to find solutions. • Performed visual assessment of products to evaluate conformance with quality standards. • Inspected welding joints and compared against standards to meet regulatory requirements. • Documented and executed detailed test plans and test cases and summarized and logged audit findings for reporting purposes. • Monitored testing procedures and verified the performance of tests according to established item specifications and protocol. Show less • Adhered to safety and clean area procedures to comply with agency and regulatory mandates. • Developed and audited practices, programs, and reporting system metrics for optimal efficiency. • Conducted data review and followed standard practices to find solutions. • Performed visual assessment of products to evaluate conformance with quality standards. • Inspected welding joints and compared against standards to meet regulatory requirements. • Documented and executed detailed… Show more • Adhered to safety and clean area procedures to comply with agency and regulatory mandates. • Developed and audited practices, programs, and reporting system metrics for optimal efficiency. • Conducted data review and followed standard practices to find solutions. • Performed visual assessment of products to evaluate conformance with quality standards. • Inspected welding joints and compared against standards to meet regulatory requirements. • Documented and executed detailed test plans and test cases and summarized and logged audit findings for reporting purposes. • Monitored testing procedures and verified the performance of tests according to established item specifications and protocol. Show less
-
-
-
Arabian Construction Co.
-
Lebanon
-
Construction
-
700 & Above Employee
-
QC Engineer
-
Apr 2018 - Feb 2020
-
-
-
Enerflex Ltd.
-
Canada
-
Oil and Gas
-
700 & Above Employee
-
Welding Inspector
-
Jan 2017 - Jan 2018
-
-
-
Petromen Contracting & Oil Field Services
-
Takreer Oil Refinery Ruwais Abu Dhabi
-
QA/QC NDT & Welding Inspector
-
Jun 2013 - 2017
Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all… Show more Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all fabrication and erection by welding is performed in conformance with the requirement of the contract document Undertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specifications Identify and marked up of every welded joint applicable for NDE Preparing of inspection reports and other documents for clients approval Witness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirements Maintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops. Show less Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all… Show more Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all fabrication and erection by welding is performed in conformance with the requirement of the contract document Undertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specifications Identify and marked up of every welded joint applicable for NDE Preparing of inspection reports and other documents for clients approval Witness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirements Maintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops. Show less
-
-
-
Descon Engineering Limited
-
Pakistan
-
Education
-
700 & Above Employee
-
QA/QC Inspector Mechanical
-
Jul 2012 - Jun 2013
Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all… Show more Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all fabrication and erection by welding is performed in conformance with the requirement of the contract document Undertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specifications Identify and marked up of every welded joint applicable for NDE Preparing of inspection reports and other documents for clients approval Witness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirements Maintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops Show less Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all… Show more Review of WPS, PQR & WPQR. In accordance with the specifications Review of QIP in accordance with the specifications Witnessing Welder’s Qualification Test and Performance test in accordance with WPS Verification of materials, material receiving inspection prior to release for fabrication Reviewing Procedures for Documentation as per plant specifications Responsible for Fit-up, Welding inspection and erection of any products related to fabrication works Ensure that all fabrication and erection by welding is performed in conformance with the requirement of the contract document Undertake workshop verification of Electrode Baking and Storage to ensure that it will meet the job requirement specifications Identify and marked up of every welded joint applicable for NDE Preparing of inspection reports and other documents for clients approval Witness the inspection and tests at sites and fabrication shop according to approved ITP and verify the inspection reports and validating the results Inspection of finished products regarding welding as per drawings and client requirements Maintaining the record of welders, reports, procedures as per client and code requirements Maintaining repair records and controlling repair rate of welder’s by analyzing the repair’s, job conditions, welding techniques along with the QC Welding Engineer Conducting shop surveillance audit for the improvement of procedure and client requirements implication Arranging tool box talks to increase awareness in welders regarding welding repair rate, welding activity and procedure requirements Raise NCR against non-conformance and maintain log sheets Monitor and follow up the timely close out of non-conformance, corrective action requests and preventing action request To ensure the implementation of quality manual specification To observe and monitor the implementation of inspection and test plan with Regards to welding related activities in Fabrication Shops Show less
-
-
-
EKL- engineering kinetics (pvt.) ltd.
-
Pakistan
-
Mental Health Care
-
1 - 100 Employee
-
QA/QC & NDT Coordinator
-
Aug 2012 - Dec 2012
Review material certification for project material to ensure it meets specification and check that it corresponds to actual material supplied Review and implement WPS and PQR as per project scope. Witnessing welder test and giving instructions to contractor to prepare the welder ID card and certificates To ensure that all activities concerning welding and painting are carried out in strict accordance with written or agreed practices or specifications Monitoring all QA/QC activities… Show more Review material certification for project material to ensure it meets specification and check that it corresponds to actual material supplied Review and implement WPS and PQR as per project scope. Witnessing welder test and giving instructions to contractor to prepare the welder ID card and certificates To ensure that all activities concerning welding and painting are carried out in strict accordance with written or agreed practices or specifications Monitoring all QA/QC activities as per approved ITP Surveillance inspection of welding equipment, materials, filler wire, electrode backing and drying ovens and its calibration. Conduct any quality control investigations as deemed necessary. Monitoring the daily contractor inspection activities that meet the product quality requirements of the project quality plan. Monitoring and inspection of underground piping RTR, GRP and HDPE as per manufacturing and project specification Show less Review material certification for project material to ensure it meets specification and check that it corresponds to actual material supplied Review and implement WPS and PQR as per project scope. Witnessing welder test and giving instructions to contractor to prepare the welder ID card and certificates To ensure that all activities concerning welding and painting are carried out in strict accordance with written or agreed practices or specifications Monitoring all QA/QC activities… Show more Review material certification for project material to ensure it meets specification and check that it corresponds to actual material supplied Review and implement WPS and PQR as per project scope. Witnessing welder test and giving instructions to contractor to prepare the welder ID card and certificates To ensure that all activities concerning welding and painting are carried out in strict accordance with written or agreed practices or specifications Monitoring all QA/QC activities as per approved ITP Surveillance inspection of welding equipment, materials, filler wire, electrode backing and drying ovens and its calibration. Conduct any quality control investigations as deemed necessary. Monitoring the daily contractor inspection activities that meet the product quality requirements of the project quality plan. Monitoring and inspection of underground piping RTR, GRP and HDPE as per manufacturing and project specification Show less
-
-
-
-
NDT Inspector
-
May 2012 - Aug 2012
nterpretation of Radio graphic Testing, verification of MPI and DPT results, Hardness Testing Supervision of NDT TEAM regarding RT/UT/MT/PT Coordination with clients and AI regarding final reports of NDE To observe and monitor the implementation of inspection and test plan with Regards to welding related activities at Fabrication Shops Inspection of Pressure Vessel, Heat Exchangers and Boilers components as per Drawings specifications Keeping all inspection equipment history… Show more nterpretation of Radio graphic Testing, verification of MPI and DPT results, Hardness Testing Supervision of NDT TEAM regarding RT/UT/MT/PT Coordination with clients and AI regarding final reports of NDE To observe and monitor the implementation of inspection and test plan with Regards to welding related activities at Fabrication Shops Inspection of Pressure Vessel, Heat Exchangers and Boilers components as per Drawings specifications Keeping all inspection equipment history files up-to-date and also keeps on-stream inspection data current. Carries out other related duties such as updated of new technical methods of inspection, especially in field of NDE UT of pressure vessels, heat exchangers, boilers, economizer, super heaters, blow down tanks Interpretation of Radiographic Films. UT of steel structure, beams, and lamination check for plates DPT of pressure vessels, tubes sheet of heat exchanger, coil bending for heat exchanger and non-pressure parts of vessels and boilers DPT of steel structure and fabricated steel structure MT of bevels before welding and for surface cracks Interpretation of MT and PT Inspections. Ultrasonic Flaw Detection of Plates, Shafts, Piping and Vessels. Ultrasonic Thickness Monitoring of Piping and Vessels with T-Mike and DMS2 TC. Surface Preparation and inspection of Paint application in accordance with SSPC standards. Thickness Monitoring and Adhesion testing of paint with Elcometer. Holiday detection of raping and paint coatings with Elcometer. Ferrite testing of duplex and stainless steel materials. Hardness testing of different materials Visual inspection of welding. Visual inspection and Profile checking of sand blasted piping and vessels Show less nterpretation of Radio graphic Testing, verification of MPI and DPT results, Hardness Testing Supervision of NDT TEAM regarding RT/UT/MT/PT Coordination with clients and AI regarding final reports of NDE To observe and monitor the implementation of inspection and test plan with Regards to welding related activities at Fabrication Shops Inspection of Pressure Vessel, Heat Exchangers and Boilers components as per Drawings specifications Keeping all inspection equipment history… Show more nterpretation of Radio graphic Testing, verification of MPI and DPT results, Hardness Testing Supervision of NDT TEAM regarding RT/UT/MT/PT Coordination with clients and AI regarding final reports of NDE To observe and monitor the implementation of inspection and test plan with Regards to welding related activities at Fabrication Shops Inspection of Pressure Vessel, Heat Exchangers and Boilers components as per Drawings specifications Keeping all inspection equipment history files up-to-date and also keeps on-stream inspection data current. Carries out other related duties such as updated of new technical methods of inspection, especially in field of NDE UT of pressure vessels, heat exchangers, boilers, economizer, super heaters, blow down tanks Interpretation of Radiographic Films. UT of steel structure, beams, and lamination check for plates DPT of pressure vessels, tubes sheet of heat exchanger, coil bending for heat exchanger and non-pressure parts of vessels and boilers DPT of steel structure and fabricated steel structure MT of bevels before welding and for surface cracks Interpretation of MT and PT Inspections. Ultrasonic Flaw Detection of Plates, Shafts, Piping and Vessels. Ultrasonic Thickness Monitoring of Piping and Vessels with T-Mike and DMS2 TC. Surface Preparation and inspection of Paint application in accordance with SSPC standards. Thickness Monitoring and Adhesion testing of paint with Elcometer. Holiday detection of raping and paint coatings with Elcometer. Ferrite testing of duplex and stainless steel materials. Hardness testing of different materials Visual inspection of welding. Visual inspection and Profile checking of sand blasted piping and vessels Show less
-
-
-
Synergy Petroleum International
-
Oil and Gas
-
1 - 100 Employee
-
QA/QC Supervisor
-
Aug 2011 - Mar 2012
Preparation of Method Statements and procedures according to applicable codes and Standards for smooth and safe execution of work. Implementation of codes standards & quality inspection planes Inspections of all activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. To conduct Welders Qualification Tests according to WPS and preparation of PQR. Coordination with the Client & Third Party regarding all NDE matters Preparation of final punch list… Show more Preparation of Method Statements and procedures according to applicable codes and Standards for smooth and safe execution of work. Implementation of codes standards & quality inspection planes Inspections of all activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. To conduct Welders Qualification Tests according to WPS and preparation of PQR. Coordination with the Client & Third Party regarding all NDE matters Preparation of final punch list and rectification of punch points. Preparation of all QA/QC Dossier. Show less Preparation of Method Statements and procedures according to applicable codes and Standards for smooth and safe execution of work. Implementation of codes standards & quality inspection planes Inspections of all activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. To conduct Welders Qualification Tests according to WPS and preparation of PQR. Coordination with the Client & Third Party regarding all NDE matters Preparation of final punch list… Show more Preparation of Method Statements and procedures according to applicable codes and Standards for smooth and safe execution of work. Implementation of codes standards & quality inspection planes Inspections of all activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. To conduct Welders Qualification Tests according to WPS and preparation of PQR. Coordination with the Client & Third Party regarding all NDE matters Preparation of final punch list and rectification of punch points. Preparation of all QA/QC Dossier. Show less
-
-
-
Applus+ Asia Middle East and Africa
-
Business Consulting and Services
-
700 & Above Employee
-
NDT Coordinator
-
Jan 2010 - Feb 2011
Radiograph film interpretation and organization of all NDE activities as per Standard requirements. Establishment of a system to control the project repair rate and monitoring of welder performance. Review of RT, DPT, PWHT and Hardness Reports. Identify repair and re-inspect with NDT after re welding the joints. Monitoring day-to-day record of running repairs, and all films. Submission of all NDT record to Client as per approved Procedure and requirement. Perform Incoming… Show more Radiograph film interpretation and organization of all NDE activities as per Standard requirements. Establishment of a system to control the project repair rate and monitoring of welder performance. Review of RT, DPT, PWHT and Hardness Reports. Identify repair and re-inspect with NDT after re welding the joints. Monitoring day-to-day record of running repairs, and all films. Submission of all NDT record to Client as per approved Procedure and requirement. Perform Incoming Material Inspection verifies MTCs according to Code, Project Specifications and Applicable Standards. Ensure handling, & storage of Materials in accordance with Project Specifications and Approved procedure as Agreed with Client . Monitor all welding activities during execution and erection, and final inspection with client. Co-ordinate in preparation & Implementation of Inspection Test plain (ITP), as per applicable code and Project Specifications.. Monitor all the fit up, orientation Dimensional Check Show less Radiograph film interpretation and organization of all NDE activities as per Standard requirements. Establishment of a system to control the project repair rate and monitoring of welder performance. Review of RT, DPT, PWHT and Hardness Reports. Identify repair and re-inspect with NDT after re welding the joints. Monitoring day-to-day record of running repairs, and all films. Submission of all NDT record to Client as per approved Procedure and requirement. Perform Incoming… Show more Radiograph film interpretation and organization of all NDE activities as per Standard requirements. Establishment of a system to control the project repair rate and monitoring of welder performance. Review of RT, DPT, PWHT and Hardness Reports. Identify repair and re-inspect with NDT after re welding the joints. Monitoring day-to-day record of running repairs, and all films. Submission of all NDT record to Client as per approved Procedure and requirement. Perform Incoming Material Inspection verifies MTCs according to Code, Project Specifications and Applicable Standards. Ensure handling, & storage of Materials in accordance with Project Specifications and Approved procedure as Agreed with Client . Monitor all welding activities during execution and erection, and final inspection with client. Co-ordinate in preparation & Implementation of Inspection Test plain (ITP), as per applicable code and Project Specifications.. Monitor all the fit up, orientation Dimensional Check Show less
-
-
-
FFBL
-
Pakistan
-
Chemical Manufacturing
-
400 - 500 Employee
-
QA/QC Supervisor
-
Nov 2009 - Dec 2010
Conduct frequent meetings with in the company to ensure smooth execution of all construction activities according to applicable codes & standards. To conduct Welders Qualification Tests according to WPS and preparation of PQR & Welders Qualification Record. Implementation of codes standards & quality inspection Plans. Inspection of all construction activities like Fabrication, Erection, Welding, Sandblasting, Painting & Coating to the applicable specifications and codes. Preparation… Show more Conduct frequent meetings with in the company to ensure smooth execution of all construction activities according to applicable codes & standards. To conduct Welders Qualification Tests according to WPS and preparation of PQR & Welders Qualification Record. Implementation of codes standards & quality inspection Plans. Inspection of all construction activities like Fabrication, Erection, Welding, Sandblasting, Painting & Coating to the applicable specifications and codes. Preparation of all QA/QC documents and QA/QC Dossier for project. Regular In house training programs, Inspections and QA/QC audits using company/ client approved Standards/ Specifications, Procedures/Checklists Show less Conduct frequent meetings with in the company to ensure smooth execution of all construction activities according to applicable codes & standards. To conduct Welders Qualification Tests according to WPS and preparation of PQR & Welders Qualification Record. Implementation of codes standards & quality inspection Plans. Inspection of all construction activities like Fabrication, Erection, Welding, Sandblasting, Painting & Coating to the applicable specifications and codes. Preparation… Show more Conduct frequent meetings with in the company to ensure smooth execution of all construction activities according to applicable codes & standards. To conduct Welders Qualification Tests according to WPS and preparation of PQR & Welders Qualification Record. Implementation of codes standards & quality inspection Plans. Inspection of all construction activities like Fabrication, Erection, Welding, Sandblasting, Painting & Coating to the applicable specifications and codes. Preparation of all QA/QC documents and QA/QC Dossier for project. Regular In house training programs, Inspections and QA/QC audits using company/ client approved Standards/ Specifications, Procedures/Checklists Show less
-
-
-
Pipe Link Construction Pvt Ltd.
-
OMV Sawan & Kadanwari Gas Fields Sindh Pakistan
-
NDT Coordinator
-
May 2008 - Jun 2009
Inspections activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. Preparation of all QA/QC documents like Test Pack, Welding inspection Reports, Detection test, Hydro Testing and Commissioning reports etc. Coordination with the QA/QC Supervisor regarding all NDE matters Inspections activities like Fabrication, Welding, Hydro testing, Sand Blasting, Painting and Coating. Preparation of all QA/QC documents like Test Pack, Welding inspection Reports, Detection test, Hydro Testing and Commissioning reports etc. Coordination with the QA/QC Supervisor regarding all NDE matters
-
-
-
Jiacco Pakistan Pvt Limited
-
Lahore, Punjab, Pakistan
-
NDT Inspector
-
Jun 2008 - Jan 2009
Perform magnetic particle inspection Perform Radio Graphic Testing inspection Perform Dye penetrates inspection per company qa/qc procedure Make all inspection reports Perform magnetic particle inspection Perform Radio Graphic Testing inspection Perform Dye penetrates inspection per company qa/qc procedure Make all inspection reports
-
-
Education
-
University of Engineering and Technology, Peshawer
Bachelor of Technology - BTech, Mechanical Engineering -
GPI Sargodha
Associate Engineer, Mechanical Engineering -
Govt Higher Secondary School Lalian