Experience

PETRONAS Technical Services Sdn Bhd

• Oil and Gas
• 100 - 200 Employee

• Project Engineer

  • Feb 2022 - Present

  1. Act as project management representative in providing services to PETRONAS Dagangan Berhad. 2. Responsible to initiate project by understanding stakeholder issues/problems and come out with solutions. 3. Lead the project from Front End Loading (FEL) to Basic Engineering Design to fully understand and address solutions to stakeholder. Act as focal person to manage between stakeholder expectation and engage with discipline engineering from PETRONAS Group Technical Solution. 4. Balance stakeholder expectations (both internal and external) against what can be practically delivered in accordance with Company HSSE standards. 5. Provide project budgetary/cost estimation to be submitted to Board of Director for project sanction. 6. Provide project charter, project schedule, project execution plan. 7. Lead Project Independent Review (PIR), Project Risk Assessment (PRA), Management of Change (MOC) prior to tendering process. 8. Work closely with Group Procurement for tendering/bidding process from contractor Pre-Qualification (Pre-Q) until Invitation to Bid (ITB) for Engineering, Procurement, Construction and Commissioning (EPCC) tender. 9. Responsible for tender reviewing, Techno-Commercial meeting with potential bidders prior to any contract award. 10. Monitor project execution for each stage of project phase from preliminaries, engineering, construction, commissioning to ensure projects are designed and constructed in compliance with company and local statutory requirement and within sound engineering principles and meeting HSSE requirement 11. Responsible for ensuring project cost controlling within the budget and on the scope without any variation orders. 12. Deliver project to stakeholder by providing Certificate of Initial Acceptance and Project Close Out report. 13. Conduct Project Lesson Learnt (PLL) with Project Management Team, Contractor and Petronas Dagangan Berhad. 14. Work closely with Group Finance for submission Project Capitalization.



NGC Energy Sdn Bhd (Malaysia)

• Malaysia
• Oil and Gas
• 1 - 100 Employee

• Technical Services Team Lead

  • Feb 2021 - Jan 2022

  1. Headed technical services team by planned and monitor operation of technical services team to provide engineering technical solution for company.2. Lead the new installations for industrial and commercial are designed and constructed in compliance with company and local statutory requirements and within sound engineering principles and meeting HSE requirements within cost budgets and time limits.3. Act as focal point with local authority (DOSH/EC) for any industrial and commercial installation design and approval.4. Develop annual maintenance planner for all industrial and commercial installations and assist to ensure timely completion of the plan by subordinates.5. Conduct regular audit on the industrial and commercial installations to check the effectiveness of the maintenance execution. Provide report and feedback to improve on weakness and gaps.6. Assist the industrial and commercial engineering team in resolving customer complaints, UCUX & VMC actions.7. Initiated cost saving for the company by exercising internal project and maintenance.8. Plan and execute technical services as new profit center by introducing new pool of clients and businesses for new income stream.9. Plan and appraise target and resources for technical services CAPEX and OPEX as well as monitor, review and report budget expenditure on a monthly basis to HOD.10. Ensure that proper control and management of documents are maintained in accordance to the stipulated procedures and Company Business Practices11. Ensure Technical services office and warehouse as well as all the assets in good condition updated in the system and follow NGC Energy standard.12. Developed and implemented in-house/external training programs for subordinate to ensure their competency and proficiency.

• Senior Technical Facilities Engineer

  • Mar 2020 - Jan 2021

• Technical Facilities Engineer

  • Jun 2017 - Feb 2020

  Key Responsible:1. Ensuring engineering and operational efficiency in LPG Logistics chain, complying with Company HSSE guidelines, local authorities and engineering standards. 2. Balance stakeholder expectations (both internal and external) against what can be practically delivered in accordance with Company HSSE standards.3. Act as technical authority accountable to manage asset integrity issues to meet regulatory and internal company agreed standard and requirement.4. Key contact for external regulatory bodies, DOSH, BOMBA, Sirim etc5. Prepare yearly budget proposal and plant allocation for CAPEX and maintenance OPEX. Plan and appraise target and resources for engineering CAPEX and OPEX as well as monitor, review and report budget expenditure, CAPEX and maintenance OPEX, on a monthly basis to HOD.6. Implement and supervise all plant engineering projects through external contractors and filling plant managers and staff. Liaise with technical contractors and suppliers for products and services related to engineering7. Monitor and ensure that LPG filling/reconditioning plants, road/rail facilities and equipment are designed and constructed in compliance with company and local statutory requirement and within sound engineering principles and meeting HSSE requirements within cost budgets and time limits8. Monitor, implement and ensure maintenance/inspection programs for all LPG filling, reconditioning plants are safe, efficient & cost effective. Update, monitor, maintain and administer maintenance management system9. Ensure Quality Management System of all plant operations (ISO9001:2005) by manage and guaranteed that proper control and management of documents are maintained in accordance to the stipulated procedures and company business practices.10. Conduct audit/risk assessment on plant maintenance operation and aware of regulatory changes and provide guidelines on regulatory compliance



GOS Pte Ltd - Global Offshore Shipping Solutions

• Singapore
• Oil and Gas
• 1 - 100 Employee

• Project/Site Engineer & Coating Inspector (Contract)

  • Nov 2016 - May 2017

  Key Responsible: 1. Expedite flawlessly the refurbishment work for the Fore Peak tank on-board EXCALIBUR LNG tanker and managed to accomplish the job impeccably ahead of the stipulated planning time without risking the job specification, achieved zero loss time injury as well as managed facilitating client on generated cost saving. 2. Responsible for conducted daily meeting to consult the Captain/Chief Officer of having a good coordination plan on the daily project progress to ensure the work can be performed accordingly. 3. Developed project schedule & also manage to retain the project timely by always closely monitor project progress, coordinating activities, resolving problems when arise to ensure minimal impact on project delivery timeline especially when working on the in-service LNG Ship tanker. 4. Conducted the daily toolbox meeting with the teammate every day in order to thoroughly discuss project planning as well as emphasising the safety requirement for the job executed to all personnel involve with the work by review job safety analysis especially when working in the highly risk environment. 5. Supervised the power & hand tools surface preparation as per standard SSPC-SP 2 & 3 & then monitored slurry blasting executed by the teammate as per QA specification ( Sa 2/SSPC-SP10) before coating application for great lifespan of protective coating. 6. Inspected the final QC of the surface preparation to ensure everything were adhered to specification before proceed for coating application. 7. Superintended of the 2 layer of zinc-rich moisture cured primer & 2 layer of epoxy top coating application by the teammates. Responsible also for conducting environmental testing. 8. Inspected final QC for the coating work done such as WFT & DFT of coating application as well as coating defect that might occurred. 9. Prepared & updated the daily project progress report, QA/QC report as well as inventory stock to be submitted to GOS & client headquarter office.



Chemco International

• United Kingdom
• Paint, Coating, and Adhesive Manufacturing
• 1 - 100 Employee

• Project Engineer

  • Nov 2015 - Oct 2016

  Key Responsible: 1. Closely facilitated the refurbishment work for the water ballast tank on-board GENMAR VICTORY crude oil tanker & successfully executed the impeccable work within the stipulated planning time without compromising the enhancement of work’s quality & generated cost saving for the client. 2. Conducted daily meeting to advise the Captain/Chief Officer of having a good coordination plan on the daily project progress to ensure the work can be executed accordingly. 3. Triumphantly maintained the project schedule by monitoring project progress, coordinating activities, resolving problems to ensure minimal impact on project delivery timeline especially when working on the in-service crude oil tanker. 4. Lead the daily toolbox meeting with to discuss project planning as well as review job safety analysis to emphasis the safety requirement for the job executed especially when working in the confine space. 5. Supervised the power & hand tools surface preparation as per standard SSPC-SP 2 & 3 & then monitored hydro jetting executed by the teammate as per QA specification (WJ4) before coating application. 6. Inspected the final QC of the surface preparation to ensure everything were adhered to specification before proceed for coating application. 7. Monitored of the 2 layer of epoxy solvent free primer & a layer of epoxy top coating application by the teammates. Inspected final QC for the coating work done such as WFT & DFT of coating application as well as coating defect that might occurred. 8. Prepared & updated the daily project progress report, QA/QC report as well as inventory stock to be submitted to CHEMCO & client headquarter office. 9. Coordinated variation order that might be requested by client to be executed on-board.



Weldcon Engineering and Construction Pte Ltd

• Pasir Gudang, Johor, Malaysia

• Project Engineer

  • Aug 2013 - Oct 2015

  Key Responsible: 1. Attended site visit and meeting with the clients to thoroughly understand the project specification and prepared the cost estimation proposal and ITB for project. 2. Initiated project schedule by studying project plan, calculating time requirements and sequencing project elements. 3. Formulated and revised JHA/JSA for project as well as maintains safe and clean working environment by enforcing procedures, rules and regulations. 4. Monitored and sustained the project schedule by monitoring project progress, coordinating activities, resolving problems to ensure minimal impact on project delivery timeline. 5. Identified and highlighted critical delays/problems and propose logical mitigation plans to resolve. 6. Coordinated and liaised with fabricator/vendor, engineering and construction team for equipment and material delivery, specification and clarification to ensure all the work completed on time. 7. Supervised and coordinated third party inspection company for Non-Destructive test and also API inspection requirement. 8. Participated and supported in commissioning work and final document compilation for project completion to be presented to the client. 9. Facilitated documentation (design, calculation etc) to be submitted and engaged with the authorities (DOSH & Energy commission) for the LPG piping system submission (PTI, PTO, ATI & ATO). 10. Closely supervised from the fabrication, installation & commissioning process of LPG piping system project. 11. Developed & implemented in-house/external training programs for workers that resulted in 35% of employer proficiency & satisfaction. 12. Assisted the manager to work on the company’s payroll account. 13. Responsible to update company’s account with current & potential client.



Perfect Combustion Pte Ltd

• Seri Kembangan, Selangor

• Sales and Services Trainee Engineer

  • Jun 2012 - Sep 2012

  •Expose to the principle of combustion on gas burner system. •Responsible to do maintenance and service of gas burner for clients. •Responsible for quality inspection of incoming gas burner stock and spare part. •Assist the General Manager meeting with the clients. •Expose to the principle of combustion on gas burner system. •Responsible to do maintenance and service of gas burner for clients. •Responsible for quality inspection of incoming gas burner stock and spare part. •Assist the General Manager meeting with the clients.