Experience

MAT FILTRATION TECHNOLOGIES

• Türkiye
• Industrial Machinery Manufacturing
• 100 - 200 Employee

• Project Manager

  • Apr 2021 - Present



Mott Macdonald

• Doha, Qatar

• Warranty Manager Umm Al Houl Power IWPP Project

  • May 2016 - Jul 2020

  Responsible for development, implementation, and management of project systems to maintain and repair all electrical and mechanical systems to maintain operational efficiency. The role also required the control of weekly warranty meetings between the contractor and client and the set up and development of the reporting systems. In this role I was also responsible for the final close out of all construction nonconformance reports (NCR’s), commissioning observations, and site wide punch listed items.



Mott MacDonald.

• Doha, Qatar

• Senior Mechanical Engineer – May 2016 – June 2018. (Qatar)

  • May 2016 - Apr 2018

  Responsible for mechanical installation, fitting and testing of all mechanical infrastructure on two islands, one water and the other power consisting of RO and MSF desalination and 2500 Mw of combined cycle power plant (CCPP) in State of Qatar. 60 MIGD of RO supplied by Acciona Agua and 80 MIGD of Hitachi Zosen MSF desalination. Main power equipment was 6 Siemens SGT8 4000F gas turbines, 4 Siemens steam turbines, and 6 Nooter Erikson HRSG’s. Responsible for mechanical installation, fitting and testing of all mechanical infrastructure on two islands, one water and the other power consisting of RO and MSF desalination and 2500 Mw of combined cycle power plant (CCPP) in State of Qatar. 60 MIGD of RO supplied by Acciona Agua and 80 MIGD of Hitachi Zosen MSF desalination. Main power equipment was 6 Siemens SGT8 4000F gas turbines, 4 Siemens steam turbines, and 6 Nooter Erikson HRSG’s.



Mitsubishi Hitachi Power Systems (MHPS).

• Brisbane, Australia

• Turbine Services Manager

  • Dec 2013 - Feb 2016

  Responsible for mechanical oversight of MHPS projects in, Australia and New Zealand and supply of TFA's in Saudi Arabia. This involved coordination with engineering suppliers and direct management of power generation maintenance teams working on Toshiba, Hitachi, Siemens and MHI projects. Also, supported project development team with creating potential for future business expansion for MHPS in Australian. Responsible for mechanical oversight of MHPS projects in, Australia and New Zealand and supply of TFA's in Saudi Arabia. This involved coordination with engineering suppliers and direct management of power generation maintenance teams working on Toshiba, Hitachi, Siemens and MHI projects. Also, supported project development team with creating potential for future business expansion for MHPS in Australian.



Binningup RO

• Binningup Western Australia

• Reverse Osmosis Commissioning Manager

  • Apr 2013 - Nov 2013

  Responsible for management of mechanical completion of RO and micro-filtration systems with follow on completion of commission activities supplying two million consumers in Western Australia. This role also focused on the satisfactory completion of all nonconformance reports (NCR’s) and punch listed items. Responsible for management of mechanical completion of RO and micro-filtration systems with follow on completion of commission activities supplying two million consumers in Western Australia. This role also focused on the satisfactory completion of all nonconformance reports (NCR’s) and punch listed items.



Origin Energy Australia.

• Brisbane, Australia

• Mechanical Commissioning Engineer

  • Aug 2012 - Apr 2013

  Responsibilities at a gas producing facility included interaction with company commissioning team, liaising with pre-commissioning and commissioning mechanical vendors, management of site commissioning mechanical teams, writing gas processing commissioning procedures, and oversight of inspection and test reporting systems. Responsibilities at a gas producing facility included interaction with company commissioning team, liaising with pre-commissioning and commissioning mechanical vendors, management of site commissioning mechanical teams, writing gas processing commissioning procedures, and oversight of inspection and test reporting systems.



British Petroleum Iraq.

• Basrah Iraq

• Lead Mechanical Commissioning

  • Dec 2011 - Jul 2012

  Working within a team for the mechanical recommissioning of three TM2500 gas turbines and review of current operational status of Pratt and Whitney FT8 gas turbines. Assess viability of existing water pumping stations conducted inspections in the BP Rumalia oil fields in Basra, Iraq. Also conducted mechanical inspections during construction of a water treatment facility in Qarmal Ali Working within a team for the mechanical recommissioning of three TM2500 gas turbines and review of current operational status of Pratt and Whitney FT8 gas turbines. Assess viability of existing water pumping stations conducted inspections in the BP Rumalia oil fields in Basra, Iraq. Also conducted mechanical inspections during construction of a water treatment facility in Qarmal Ali



Parsons Brinkerhoff Middle East.

• Deputy Site Manager

  • Dec 2010 - Dec 2011

  At the same State of Qatar project noted below, promoted to Deputy Site Manager. Reporting to the Construction Director and Site Manager, responsible for completion of the works by the OEM and EPC contractors and follow on commissioning activities. Also, managed the site inspectors, site engineers, and oversaw completion of construction nonconformance reports.

• Senior Commissioning Engineer Qatar

  • Dec 2009 - Dec 2011

  Project in State of Qatar included a 2730MW combined cycle power plant (CCPP) with 8 Mitsubishi GTs, 8 HRSGs, 4 STGs, and 63 MIGD of desalinated water island consisting of 10 Sidem MED units. Responsible for leading the mechanical commissioning of the power plant and water island, review of EPC contractor’s commissioning procedures, control and issuing completion certificates, liaising with stakeholders including governmental authorities, and training of multinational operation teams.



General Electric Company (oil & gas)

• Global

• Service Engineer

  • Jul 2008 - Nov 2009

  Project in Western Australia included the following: General Electric equipment. GE MS 5001 and MS 5002 double shaft frame 6B, 9E, LM, 2500, LM 6000. Responsibilities included oversight of overhauls of this General Electric equipment, supervision of General Electric contractors, and ensuring that all contractors adhered to General Electric safety and site policies. Project in Western Australia included the following: General Electric equipment. GE MS 5001 and MS 5002 double shaft frame 6B, 9E, LM, 2500, LM 6000. Responsibilities included oversight of overhauls of this General Electric equipment, supervision of General Electric contractors, and ensuring that all contractors adhered to General Electric safety and site policies.



International Power Pty Ltd.

• Botswana

• Project development assis

  • Jan 2008 - Jun 2008

  Provided technical assistance to project development team in preparing a proposal for 6000Mw Siemens coal fired power plant to be constructed in Mmamabula, Botswana. Though the project proposal was accepted, but due to global financial issues the project was put on indefinite hold. Provided technical assistance to project development team in preparing a proposal for 6000Mw Siemens coal fired power plant to be constructed in Mmamabula, Botswana. Though the project proposal was accepted, but due to global financial issues the project was put on indefinite hold.



International Power

• Assistant Safety Manager

  • Jun 2007 - Jan 2008

  Responsibilities included safety system reviews at ongoing projects in Southern Australia, implementation of a new permit to work system and procedures, job safety analysis documentation (JSA’s) and site Take 5 assessment cards, and conducted site staff training on the new company global permit to work system.

• Warranty Manager

  • Jan 2006 - Jun 2007

  Promoted to Warranty Manager on same State of Qatar project as listed below. Again, seconded to Qatar Power Company to oversee all warrantee activities at 1100MW and 65 MIGD/MSF plant. Responsibilities included development and implementation of warranty systems for all EPCs, developed warranty reporting systems, managed regular warranty meetings with EPCs, and facilitated delivery of warranties items to client.



International Power

• Doha, Qatar

• Commissioning Manager

  • Jan 2005 - Jan 2006

  Project was for the Qatar Power Company in the State of Qatar that consisted of a 1100MW of power and 65 MIGD Doosan MSF desalination plant. Seconded to Qatar Power Company worked in conjunction with Qatar Power Company’s consultant, Mott Macdonald to assist and deliver mechanical components of the project. With Mott MacDonald’s mechanical engineering team conducted regular site inspections in preparation of commissioning activities. Also, responsible for daily commissioning activities, introduction of commissioning protocols, and review of documentation prior to acceptance by the client.



International Power

• Lead Commissioning Manager

  • Feb 2004 - Mar 2005

  Lead commissioning engineer consultant to Al Kamil Power Company in Oman for a 375MW open cycle power plant. Responsibilities included preparation, implementation, and oversight of commissioning procedures, training of multinational operation personnel, and interfacing with Oman Governmental Authorities. Role included implementation of the International Power Permit to Work system and training of site personnel.

• Shift Supervisor Pelican Point CCGT

  • Feb 2000 - Jan 2004

  Project was one of Australia’s largest combined cycle power plants comprising of two 165 MW Alstom 13E2 gas turbines with two heat recovery steam generators and one 170MW steam turbine. Responsibilities included daily supervision of sift operations, issuing safety permits, liaising with site contractors, and training of plant operators.



Osborne Cogeneration Pty Ltd.

• Adeliade South Australia

• Shift Supervisor

  • Nov 1997 - Dec 1999

  During commissioning of an Osborne combined cycle cogeneration power plant that included 120MW gas turbine, heat recovery steam generator, 60MW steam turbine, and two 31.5kg/s gas fired auxiliary boilers, responsibilities included managing the daily operations of the operation team, oversight of high voltage electrical switching isolation and earthing systems, and management of permits to work. During commissioning of an Osborne combined cycle cogeneration power plant that included 120MW gas turbine, heat recovery steam generator, 60MW steam turbine, and two 31.5kg/s gas fired auxiliary boilers, responsibilities included managing the daily operations of the operation team, oversight of high voltage electrical switching isolation and earthing systems, and management of permits to work.



Royal Australian Navy

• Australia
• Armed Forces
• 700 & Above Employee

• Marine Engineer

  • Feb 1989 - Oct 1997

  Duties included operation and maintenance of onboard ship boilers, diesel generators, turbines, and distillation evaporators. Also assigned as onboard fire safety instructor and damage control supervisor. During service received certificates for filter and turning, marine propulsion, electric plant controls, and marine engineering machinery operations. Duties included operation and maintenance of onboard ship boilers, diesel generators, turbines, and distillation evaporators. Also assigned as onboard fire safety instructor and damage control supervisor. During service received certificates for filter and turning, marine propulsion, electric plant controls, and marine engineering machinery operations.