Martin Aguirre
Generator Consultant at DM Electrical and Construction LLC- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
Topline Score
Bio
Credentials
-
Electrical Skills Basic
San Jacinto CollegeMay, 2011- Nov, 2024 -
Electrical Skills Intermediate
San Jacinto CollegeMay, 2011- Nov, 2024 -
Plumber [Apprentice]
TSBPEMar, 2017- Nov, 2024 -
Electrician [Apprentice]
TDLR - COMPLIANCENov, 2015- Nov, 2024 -
Generator Technician Certification
Generac Power SystemsMar, 2021- Nov, 2024
Experience
-
DM Electrical and Construction LLC
-
United States
-
Construction
-
1 - 100 Employee
-
Generator Consultant
-
Aug 2022 - Present
Helping with standby Generators Helping with standby Generators
-
-
-
Generator Power Systems/Fish Electric
-
United States
-
Construction
-
1 - 100 Employee
-
Electrician
-
Nov 2021 - Aug 2022
Install and troubleshoot Kohler generators. Also perform work on switchgear, transfer switches, contactors, electrical panels, lighting. Install and troubleshoot Kohler generators. Also perform work on switchgear, transfer switches, contactors, electrical panels, lighting.
-
-
-
Spring Generator
-
United States
-
Project Manager
-
Nov 2019 - Nov 2021
Conduct welcome calls to customers. Schedule for working permits, ATS approvals, TCIs and all other work performed for start until completion of turn key installation. Ordered and kept inventory of electrical and plumbing material. Responsible to scope, develop, coordinate, and communicate all levels of the project. Oversee and train on installation, maintenance, troubleshooting, testing and repair work of generator and ATS. Overseeing daily operations of technicians and installation department. Developed preliminarily estimates, rough order of magnitude estimates, budgetary estimates, and definitive estimates as required by the project type and complexity. Hold and electronically stored/ maintained all current estimate revisions and back up information. Duties as an installer were digging trenches, laying conduit, fabricating and assembling brackets for mounting ATS and pipe, pull and push wire, bend pipe, cut and thread pipe. Terminating high voltage wire in ATS, generator and breaker panel. Terminating low voltage wire and in generator and ATS. Breaker panel, electrical meter and disconnect service and installation. Generator and ATS start ups and testing. Set installation for polyethylene pipe, galvanized pipe for NG and LP gas lines. Build and set concrete pad for generators. Set and anchored generator to pad. Troubleshooting any malfunctioning in apparatus. WiFi and 4G Mobile Link installation. Perform startups on generators, set exerciser, time, fuel type and training with customer. MAG test, use devices to check correct voltage or check devices to see if are were safe for operation. Service generators on basic PM, magneto changes, engine replacement, stator and rotor swaps. Show less
-
-
-
Waukesha-Pearce Industries (WPI)
-
United States
-
Oil and Gas
-
500 - 600 Employee
-
Power Generation Electrician
-
Dec 2018 - Nov 2019
Installation of Industrial Generators Primary duties were with digging trenches, laying conduit, fabricating and assembling brackets for mounting ATS and pipe, mounting ATS, pull and push wire, bend rigid pipe with 555 bender, cut and thread pipe. Terminating high voltage wire in ATS, generator and customer breaker panel. Terminating low voltage wire and CAT5 in generator. Build and set concrete pad for generator. Setting and anchoring generator to pad. Caldweld grounding. Read and Interpret electrical schematics. MAG test, use devices to check correct voltage or check devices to see if they were safe for operation. Maintain inventory of material in work truck. Show less
-
-
-
-
Lead Electrician
-
Aug 2018 - Dec 2018
Maintained, repaired, designed, installed and upgraded electrical on water well and single and three phase systems. Maintained, repaired industrial motor controls, pump drives, chemical feed systems, and all other facility electrical systems. Installed and terminated new control panel, IDEC Relays, pump control boxes, mercoids, booster pumps, service disconnect, pvc pipe, pressure swithes, J boxes, wire and terminations. Performed preventative maintenance on cables, bolts, filters, gaskets, seals, bearings and other mechanical parts; participated in replacing piping, valve parts and equipment fabrication. Performed general cleaning of sites; cleared prunes shrubs and trees. Designed, installed, maintained, and repaired building circuits and related equipment. Gathered and organized materials to be lead to job site; loaded pipe, trackhoe and other materials onto van for delivery to job site. On call to respond to emergencies and breakdowns at the plant and lift stations and participate in emergency on-call duty on a rotational basis Show less
-
-
-
Worldwide Power Products, LLC
-
Electric Power Generation
-
1 - 100 Employee
-
Generator Technician
-
May 2018 - Jul 2018
Basic engine / generator mechanical and electrical operation to perform tasks or assist other Replaced belts and hoses; changes and/or tops off oil and filters Properly and completely filled out all service reports, PM checklists and timecards within department guidelines Obtained pre-assigned work orders by schedule date, customer name, service level and locate / load parts, check for any special instructions; Traveled to job site, performed scope of work, provided detailed computerized template report and time card upon work assignment completion for daily accountability Proficiently and accurately evaluated, tested ,diagnosed and troubleshooted basic and intermediate problems on gas or diesel engines and generators (out of fuel, dead battery, etc.); Give recommendations for and make associated repairs Performed Load bank testing with full understanding of both Reactive/Resistive testing Performed block heaters and installs battery chargers Performed control panel conversions, re-tapping generator ends, and isolating / replacing faulty breakers Set up, started and operated equipment as directed both in-house and at customer locations Occasionally supported sales team on sales calls and bid preparation Maintained thorough knowledge of and actively practice and promote safe working activities in accordance with OSHA, EPA and other required regulations dealing with safe operation of all equipment Prepared various reports as directed to maintain accurate records on equipment and preventive maintenance Performed troubleshooting and corrective maintenance; troubleshooting and -corrective maintenance tasks on engines, generators and other associated mechanical and electrical equipment Performed installations of advanced systems including Bi-Fuel equipment, and Automatic Transfer Switches (ATS), paralleling and other switch gear Show less
-
-
-
Generators of Houston A GENRG Power Solutions, LLC Company
-
United States
-
Oil and Gas
-
1 - 100 Employee
-
Apprentice Plumber and Electrician
-
Jul 2016 - Oct 2017
Installed home or commercial generators and transfer switches. Assisted and participated in routine inspections and made modifications to diesel generators and LNG generators. Assisted in performing installation in Automatic Transfer Switches (ATS), Standby generators, sub panels and transformers. Conducted automatic and manual transfer tests of simulated power outages to ensure generators were functioning properly. Served as assigned lead helper in some assignments by senior electrician to assist other current apprentices, train new crew workers and part- time contract laborers. Performed correct rigging standards and principles of safe and efficient methods for handling generators and other heavy materials. Performed physically demanding tasks such as pushing generators to be set, dug trenches to lay pvc conduit, gas line and mixed, poured and finished concrete. Terminated connections from gas line on generator side. Appropriate personal protective equipment (PPE) and always applied proper safety regulations. Read and interpreted electrical schematics. Maintained inventory of all related electrical and plumbing materials in electrical shop and truck as well as prepared purchase orders for future jobs. Measured, cut, and bent wire, as well as conduit. Worked with all manners of material from EMT pipe, Rigid pipe, non/metallic carlon conduit, romex, SCR cable, etc. Used power and hand tools such as conduit/wire benders, screwdrivers, pliers, knives, hacksaws, sawzalls, rotor hammer, drills and wire strippers, etc. Secured brackets to bulkheads with screws and bolts and pulled wires through conduit leading to connection boxes, switch panels, and other terminals. Installed cable trays and electrical components such as fittings, J-Boxes and service disconnects. Drove work truck, trailer, generators and other machinery to worksite. Responded to customer service calls related to power outages, accidents, and weather conditions. Show less
-
-
-
A&A GenPro, Inc.
-
United States
-
Construction
-
1 - 100 Employee
-
Apprentice Electrician
-
Jun 2014 - Jun 2016
Installed home or commercial generators and transfer switches. Assisted and participated in routine inspections and made modifications to diesel and LNG generators. (Generac, Cummins/Onan, Kohler, CAT) Performed installation, preventive and corrective maintenance on Automatic Transfer Switches (ATS) and standy generators. Maintained count of shop, vehicle and new inventory. Maintained clean and safe work areas to perform tasks given. Made electrical and mechanical wiring modifications to control circuits. Installed electrical components, such as transformers and circuit breakers. Conducted automatic and manual transfer tests of simulated power outages to ensure generators are functioning properly. Made load bank checks and provided other customer services. Tested batteries, fuel coolant, and oil for analysis. Dug trench from generator to new high-pressure gas meter and to electrical meter. Performed physically demanding tasks such as digging trenches to lay conduit, gas line and set, mix, poured and finishing concrete. Appropriate personal protective equipment (PPE). Read and interpreted electrical and mechanical drawings and schematics. Measured, cut, and bent wire, as well as conduit. Assisted senior electrician in connection of power cables to equipment that was being installed. Show less
-
-
Education
-
2011 -
San Jacinto College
Electrical Technology
Community
