Experience

L.E.S.S. Consulting - LS Contracta BV

• Belgium
• Business Consulting and Services
• 1 - 100 Employee

• CEO & Founder L.E.S.S. Consulting - LS Contracta BV

  • Jul 2011 - Present

  • Freelance consultant (Chemical/Petrochemical/Pharmaceutical/Nuclear Industry) • Real estate Expert - Real estate Developer • Court Expert for: the Court of Appeal Antwerp, Court First Instance East-Flanders (Department Dendermonde), Court First Instance Antwerp (Department Turnhout), Commercial Court Gent (Department Dendermonde), District Court Beveren, District Courts Leuven (Registrated in the FOD National Register of Court Experts under ID number: EXP5643780) • Freelance consultant (Chemical/Petrochemical/Pharmaceutical/Nuclear Industry) • Real estate Expert - Real estate Developer • Court Expert for: the Court of Appeal Antwerp, Court First Instance East-Flanders (Department Dendermonde), Court First Instance Antwerp (Department Turnhout), Commercial Court Gent (Department Dendermonde), District Court Beveren, District Courts Leuven (Registrated in the FOD National Register of Court Experts under ID number: EXP5643780)



FOD Justitie SPF Justice

• Belgium
• Government Administration
• 700 & Above Employee

• Gerechtsdeskundige / Expert (Identificatienummer Nationaal Register Gerechtsdeskundigen: EXP5643780)

  • 2012 - Present

  Court Expert for: • Court of Appeal Antwerp • Court First Instance East-Flanders (Department Dendermonde) • Court First Instance Antwerp (Department Antwerp, Department Turnhout) • Commercial Court Gent (Department Dendermonde) • District Court Beveren • District Courts Leuven Court Expert for: • Court of Appeal Antwerp • Court First Instance East-Flanders (Department Dendermonde) • Court First Instance Antwerp (Department Antwerp, Department Turnhout) • Commercial Court Gent (Department Dendermonde) • District Court Beveren • District Courts Leuven



TRACTEBEL

• Belgium
• Engineering Services
• 700 & Above Employee

• Electrical Design Engineer

  • Nov 2020 - Present

  Oosterweelconnection (Lantis) – Engie Tractebel • Perform as lead electrical engineer in projects from A to Z (Set up principles for design of installations/equipment/scope of works, ensure correct design measurements of installations/architectural demands/activities, verify alignment and progress of graphical documentation and summary of measurement statements) • Responsible for budget, timing, quality and correct execution of engineeringservices and ongoing scope in progress • Collaborate and consultation with external partners (architects, other design- and engineeringcompany’s, contractors, subcontractors, as well during preliminary study and contructionphase • Foreseeing of information and support to customers and partners, based on their needs and wishes • Monthly reporting regarding progress of ongoing projects • Watch over projects concerning execution in terms of alignment with qualitysystem and H&S-rules • Coördinate and lead BIM modelleurs electrical Show less



ELECTRABEL - ENGIE GROUP

• Expert I&C + E

  • May 2020 - Sep 2020

  Component Health Analyses and Reports: Instrument & Controls + Electrical (CHR) in anticipation of the LTO Project G2 (Business Unit Doel 4) – Engie Electrabel• Inventarisation of the inputs per Commodity Group (CG) in the context of Component Health Analyses and Reports (CHR)• Analysing trends, evolutions and phenomonies of degradation per CG• Consultation with Component Engineers and Experts, validation of the analyses by the Component Engineer• Estimate the risks involving operation-ability and Nuclear Safety (Component Health Index)• Define and follow-up the ‘Way-to-Green’: action plans, status reports of ongoing actions, technical consideration of these actions with the project leaders, as well feasibility of the planning, reporting of the observations according the CHR guidelines• Updating strategic documents belonging tot the concerned CG• Securing technical information in order to guarantee traceability of the analysis and reports Show less

• Project Lead I&C

  • Jun 2018 - May 2020

  LTO Project (Long Time Operation Project): Modifications nuclear power plant Doel in order to guarantee operation ability of units Doel 1 and 2 – Engie Electrabel • Estimation resources and budget, budget follow-up, risk control (1.4 mio euro) • Project planning for all activities and areas• Progress follow-up and reporting• Site follow up and coordination (execution according scope, maintain planning and budget, take into account quality requirements, work instructions, safety procedures) + provide assistance in case of misalignments and foresee solutions if necessary • Responsible for 18 different projects, as well during preparation, execution and start up phase Show less

• Project Engineer I&C

  • Oct 2017 - May 2018

  LTO Project (Long Time Operation Project): Modifications nuclear power plant Doel in order to guarantee operation ability of units Doel 1 and 2 – Engie Electrabel• Technical analysis and work preparation, scheduling the scope of work, estimate resources, risk-control (HSE), preparing work permits, reservation of spare parts• Site follow up and coordination (execution according scope, maintain planning and budget, take into account quality requirements, work instructions, safety procedures) + provide assistance in case of misalignments and foresee solutions if necessary • Testing, re-qualification and start-up (verify if installation fulfills the stated demands and specifications regarding maintenance, repair, project or change)• Close out and after care: post-job debriefing and after action review (AAR), close out work permit, deposit intervention or project file, adapt documentation, accordant “as-built” situation• Report to project manager of involved trade/department (as well during work preparation phase, construction phase, start-up phase and close out)• Emplace detailed execution reports relevant to different projects for the several phases of the main project• Provide E&I study and advice in regards to the to be implemented materials and good practices Show less



Nippon Shokubai Europe

• Belgium
• Chemical Manufacturing
• 1 - 100 Employee

• E&I Testpack Coördinator

  • Jun 2017 - Sep 2017

  NSE3 Project (Nippon Shokubai Europe 3 Project): Lot 2AA (New SAP plant) • Coördinate progress and status regarding all E&I testpacks, as well maintaining planning/schedule according priorities client • Organise final walk downs and inspections including informing client when these will take place • Lead E&I testers according priorities schedule and hand-over • Overview regarding progress and status priorities for project manager on a daily base • Checking of all testpacks for completeness of necessary certificates prior to hand over to client • Close coordination with construction department and other involved departments prior to hand over documentation • Inspect as built drawings for completeness of necessary certificates prior to hand over to client • Assemble inspection en test plan (ITP) as well final documentation book Show less



Cargill

• United States
• Food and Beverage Manufacturing
• 700 & Above Employee

• E&I Project Coördinator

  • May 2017 - Jun 2017

  Milling Project: Revamp old MCC installation with modifications and extensions in milling building • Replacing obsolete MCC installation, as well the most of all power cables and control cables • Foresee and install new consumers and power distribution (Low voltage, Medium voltage, Control voltage, VFD’s) • Manage and control all necessary permits, as well organizing start-work and toolboxes • Close coordination with other involved departments prior to hand over the installation for start-up faze • Make up As built drawings and materialists, check for completeness of necessary certificates prior to hand over to client Show less



ExxonMobil

• Oil and Gas
• 700 & Above Employee

• E&I Start-Up Surveyor ExxonMobil (ANWERUP Project: Fluor - Amec Foster Wheeler Italiana)

  • Sep 2016 - May 2017

  Anwerup Project (Antwerp-NW-Europe-Resid-Project): EPC 1 DCU (New Delayed Coker Unit + Flare) - Fluor Anwerup Project (Antwerp-NW-Europe-Resid-Project): EPC 2 Revamp (Turn-around en revamp refinery, electrical modifications and extensions in different substations and instrumentation buildings) - Amec Foster Wheeler Italiana • Visit Fluor module yard in Tarragona (Spain) on a frequent base in order to punch and check the electrical and instrumentation part regarding quality and craftmanship prior shipping of these modules to the site in Antwerp (EPC 1 new Delayed Coker Unit + Flare) • Supervising electrical and instrumentation activities (modifications and extensions) in electrical substations and instrumentation buildings spread over the refinery, check and punch al the executed works regarding quality and excecution according procedures client. (UPS power supply’s, capacitor banks, extension bus bars, SWG, SWBD, ESWBD, PMCC, TAPC, DP, IPDP, IFP, VSD’s, NLP, ELP, EHTP) Instrumentation power supply’s, low voltage, mid voltage and high voltage • Operation responsibility/ownership of the installation and switching competence BA5 during pre-commissioning en commissioning (start up fase). As well placing, managing and following-up all LOTO cards and locks (LOTO – Lock-out – tag-out procedure) • Taking out of service of electrical panels and bus bars after close coordination and discussion with production and indirect departments (production team leaders, loading docks, net operators, …) • Executing FAT’s with manufacturers of new panels prior shipment to the refinery, as well assisting construction regarding the SAT’s on site • Strict deliberation with other departments and relevant departments to be able to implement and integrate the Anwerup scope during Turn-Arounds in the start up phase. Show less



Total

• Argentina
• Food and Beverage Services
• 1 - 100 Employee

• Electrical Supervisor Total (OPTARA Project: Integrated team Total - Amec Foster Wheeler Italiana)

  • Feb 2015 - Sep 2016

  Optara Project (Optimalisation-Antwerp-Rotterdam-Area-Project): Lot 3A(SWS unit, HPS boiler unit, Offsites and utilities, electrical modifications and extensions in 17 substations) - integrated team Total – Amec Foster Wheeler ItalianaOptara Project (Optimalisation-Antwerp-Rotterdam-Area-Project): Lot 2B(Turn-Around and revamp ARDS unit) integrated team Total – Tecnicas Reunidas España• Coordinating and steering contractors for the electrical part of the build-up of 2 new units (scope ISBL: SWS unit, HPS boilers unit + scope OSBL: O&U, electrical modifications and extensions in 17 substations)• Coordinating electrical modifications, following-up materials, contractor and manufacturer (AEG, Siemens, ABB, Schneider, Merlin Gerin, CEE, CG, Somati). Going from UPS feedings, capacity banks, and constructing extensions by placing bus bars (SWG, SWBD, ESWBD, PMCC, TAPC, PDP, IPDP, IFP, VSD’s, NLP, ELP). This counts for low voltage, mid voltage and high voltage• Exclusive operation responsability/ownership of the installation and switching competence BA5 for all these modifications during construction, pre-commissioning and commissioning. Going from placing, managing and following-up all LOTO cards, but also giving toolbox meetings to the electrical contractors and sub-contractors for the support of the project safety department• Taking out of service of electrical panels and bus bars after close coordination and discussion with production and indirect departments• Troubleshooting during all phases of the project, going from re-engineering on site, detailed engineering, editing red mark ups in preparation of the hand-over dossiers• Review and control on completeness of all dossiers for the electrical part of the electrical dossier: NOBO (Vicotte) reports, material lists, As-build-schematics,… And this during all phases of the project (RFC – Ready For Commissioning, AOC – Achievement Of Commissioning, TOMC – Transfer to Operations and Maintenance Certificate) Show less

• Turn-Around Coordinator Electrical

  • 2013 - 2015

  • Collecting and controlling scope for the electrical discipline for the Turn-Around, in agreement with the electrical and production department• Guarding and anticipating all available units concerning possible emergency reparations for the upcoming Turn-Arounds to achieve the goals regarding planning and cost • Proposing scope changes and preparing, controlling and financial finishing of extra works (EWR’s), as well as reporting the consequences of these extra works to the management• Making sure that the preparation works of the electrical scope for Turn-Around are being executed (work packages, MOC procedure, material coordination, scheduling, QA/QC, cost control, technical scope for price offers, technical data administration in SAP, full integration of projects, …)• Steering electrical work preparators: offering them technical support, systematically control of quality of all work packages, …• Upkeep of the electrical database, adding improvements to the system• Follow-up and completing price requests and strategy during Turn-Around for electrical contractors (price requests, executing technical evaluations for contracts, this for services as well as for materials)• Offering assistance with the build-up and follow-up of the Turn-Around budget and planning of the electrical scope• Organizing meetings in function of the necessity during preparation and execution • Offering support and communication during execution to the area superintendent and electrical supervisors, as well as preparation of potential extra works• Being responsible for the timely transmission of end phasing Turn-Around and assuring of all legal inspections/obligations (AREI, ATEX, NOBO)• Organization and evaluation of electrical contractors, close-out reporting, update of technical data (as-built), archiving for Turn-Around history, offering support and implementation for process improvements, lessons learned, …• Supervising the safety procedures + take action if necessary Show less



Lanxess

• Germany
• Chemical Manufacturing
• 700 & Above Employee

• E&I Workpreparator / Planner

  • 2012 - 2013

  • E&I work preparation • Supervising contractors during shutdown • Defining electrical and instrumental scope in deliberation with departments maintenance/operations • Detailed engineering and re-engineering if necessary • Planning, making of time schedules and guarding these • Coordinating contractors, organising and foreseen of sufficient man load • Adjusting plans/schematics to the new situation (control circuits, motor schematics, isometrics + PID’s) • Ordering materials/equipment and requesting price offers • Expediting + reception of ordered materials and daily follow-up • Supervision and steering contractors/own people • Coordination (electrical and instrumental) for Turn-Arounds and emergency shutdowns • Following-up, coordinating and reporting of work improvements and adapting if necessary • Attending coordination meetings and progress meetings • Editing and finishing punch lists • Guarding of scope and budget (cost control and follow-up) • Supervision of to follow safety procedures + taking action and correcting if necessary • Organizing and following-up electrical inspections by external partners Show less



Dow Chemical

• China
• Chemical Manufacturing
• 1 - 100 Employee

• E&I Workpreparator shutdown

  • 2012 - 2012

  • E&I work preparation • Supervision contractors during shutdown • Attending coordination meetings and progress meetings • Editing and finishing punch lists • Supervision of to follow safety procedures + taking action and correcting if necessary • E&I work preparation • Supervision contractors during shutdown • Attending coordination meetings and progress meetings • Editing and finishing punch lists • Supervision of to follow safety procedures + taking action and correcting if necessary



Ineos

• Switzerland
• Chemical Manufacturing
• 700 & Above Employee

• E&I Shutdown preparation

  • 2011 - 2011

  • Shutdown preparation • E&I work preparation and planner • Supervision contractors during shutdown • Attending coordination meetings and progress meetings • Guarding of scope and follow up • Shutdown preparation • E&I work preparation and planner • Supervision contractors during shutdown • Attending coordination meetings and progress meetings • Guarding of scope and follow up



Pfizer

• Events Services
• 1 - 100 Employee

• Automation/Instrumentation support shutdown

  • 2010 - 2011

  • E + M&R activities • Work preparation • Support maintenance department during shutdown • Problemsolving/trouble-shooting • Supervision contractors • E + M&R activities • Work preparation • Support maintenance department during shutdown • Problemsolving/trouble-shooting • Supervision contractors



DEME Group

• Belgium
• Civil Engineering
• 700 & Above Employee

• Supervisor

  • 2009 - 2010

  • Supervision • Problem-solving/trouble-shooting • Supervision • Problem-solving/trouble-shooting



BASF

• Germany
• Chemical Manufacturing
• 700 & Above Employee

• E&I Maintenance / Tester

  • 2006 - 2009

  • E + M&R activities • Work preparation • Support TA Automation department • Problemsolving/troubleshooting • Supervision and steering contractors • E + M&R activities • Work preparation • Support TA Automation department • Problemsolving/troubleshooting • Supervision and steering contractors