Experience

East West Industries Viet Nam

• Vietnam
• Appliances, Electrical, and Electronics Manufacturing
• 1 - 100 Employee

• Manufacturing Director

  • Jun 2021 - Present

  In charge of all operations of production in the factories - Injection, SMT, Assembly and ToolingGeneral:- Increase efficiency of the factory by coordinating all production departments: SMT, Injection, Assembly, and Tooling (Mold Design, Mold shop, and Mold assembly).- Sharing best practices between the production departments, aligning with other departments on problem-solving, and build up the teamwork spirit.- Preparing for investments in new equipment, preparing for new projects, people development, technology development.- Develop and implement a culture of continuously improving manufacturing, utilizing lean and automation concepts. Encourage the team to make improvements, train people to improve their mindset and attitude- Implement systems, structures, and standards that make it possible for staff to reach given goals and keep results on a long termProduction:- Coordinate with all departments to build up relationship and teamwork spirit to improve the efficiency of production- Apply Lean principles to improve manufacturing processes to reduce costs. Work out what needs to improve more or change the processes to reduce waste from production.- Encourage team members to find out the solution and apply the improvement idea from them to reduce the waste.- Manage manufacturing process to ensure on-time delivery and maintain quality standards.- Oversee utilization of manpower resources, work with all production departments on workforce planning and optimization to reach the target as planned- Control what is using in production, work with the team to set up consumption for each and set up the plan to reduce the cost, continuous improvement by working with a team try to find out more suppliers which can bring the good quality and lower priceTooling:Responsible for developing and supporting full injection mold-making operations. This includes new project quotations, mold designs, DFM feedback, tooling workshop, and new tooling validation. Show less

• Manufacturing Manager

  • Dec 2018 - May 2021

  General:- Increase efficiency of the factory by coordinating all production departments: SMT, Injection, Assembly, and Tooling (Mold Design, Mold shop, and Mold assembly).- Sharing best practices between the production departments, aligning with other departments on problem-solving, and build up the teamwork spirit.- Preparing for investments in new equipment, preparing for new projects, people development, technology development.- Develop and implement a culture of continuously improving manufacturing, utilizing lean and automation concepts. Encourage the team to make improvements, train people to improve their mindset and attitude- Implement systems, structures, and standards that make it possible for staff to reach given goals and keep results on a long termProduction:- Coordinate with all departments to build up relationship and teamwork spirit to improve the efficiency of production- Apply Lean principles to improve manufacturing processes to reduce costs. Work out what needs to improve more or change the processes to reduce waste from production.- Encourage team members to find out the solution and apply the improvement idea from them to reduce the waste.- Manage manufacturing process to ensure on-time delivery and maintain quality standards.- Oversee utilization of manpower resources, work with all production departments on workforce planning and optimization to reach the target as planned- Control what is using in production, work with the team to set up consumption for each and set up the plan to reduce the cost, continuous improvement by working with a team try to find out more suppliers which can bring the good quality and lower priceTooling: Responsible for developing and supporting full injection mold-making operations. This includes new project quotations, mold designs, DFM feedback, tooling workshop, and new tooling validation. Show less

• Tooling Manager

  • Jun 2017 - Dec 2018

  - Directly manage all operations of injection molding factory- Directly manage, develop, and support full mold-making responsibilities: This includes new project quotation, Project Management, Design, DFM feedback, Machining, Assembly, Test, and new tooling validation…- Manage a team of mold designers including providing technical direction and hiring/training new designers to expand capacity- Provide operational support to Mold shop management - Productivity improvements, Documentation improvements, 5S culture, Monthly tracking of overheads, Reporting ...- Work with the mold shop team to ensure machining operations are carried out in a way to ensure the proper result.- Work with other departments as well as customers to provide DFM feedback during the product design stage. - Find and develop new supplier relationships to support mold-making and outsourcing functions. (raw materials, heat treatment, outsourced machining) functions. (raw materials, heat treatment, outsourced machining)- Implement a department culture centered on continuous improvement- Support Injection team to improve existing tooling to increase efficiency and decrease scrap Show less

• Injection Manager

  • Jul 2015 - Nov 2018

  Directly supervise all operations of injection molding factory:- Build and develop Molding Department. Set up and implement standard operating procedures for injection. - Documents control and setting the quality standards create SOP, WI. - Development of the department to increase capacity.- Manage and supervise preventive and corrective Maintenance for injection machines, equipment and system.- Contact to the machine suppliers/ contractors for the injection machine, equipment or spare part needed for factory or to conduct maintenance of the machines. - Manage and supervise mold maintenance team to assembly new molds, improve the existing molds and mold setting job. - Manage and supervise injection team to coordinate with Engineering and Design and Quality team to conduct the mold trial, analyze, feedback with proposal to improve the mold quality. - Involved with product development, review mold design with Design and Engineering team to makes recommendations for changes to product design if needed - Execution of the production plan and material planning process, follow up the schedule of delivery and adjusting schedules if needed.- Monitoring the production processes, output capacity, quality.- Supervising and directing to train all my subordinates to increase their skill in production management.- Proposal to BOD for the injection molding machine or equipment needed to develop the injection factory- Other tasks as to be assigned by Operations Manager or Director Show less



framas

• Germany
• Footwear Manufacturing
• 200 - 300 Employee

• Production Manager

  • Dec 2014 - Jul 2015

  - Overseeing the production processes, drawing up production schedules and procedures to get the best quality of products, and make sure that products are developed, produced, and delivered on time in accordance with design and requirements.- Establish and maintain the standards of performance for the operation. Coordinate, set up, and implement standard operating procedures for all production operations.- Working out the human resources needed. Work with related team on manpower calculation for seasons and suggest action plan accordingly to increase the efficiency of manpower using...- Calculating how long a job will take and setting the quality standards, create SOP.- Monitoring the output capacity, quality, follow-up the schedule of delivery. - Always improving the production lines and quality to increase the output capacity to ensure the delivery is on time.- Support to maintenance team (mold/ machine) in overall issues or discussions, guidelines.- 6S standards set up and implementation-improvement- Suggest overall company improvements- Supervising and directing to train all my subordinates to increase their skill in production management. Show less

• Production Project Leader

  • Aug 2012 - Nov 2014

  - Manage and technical support to all tooling running in the factory - Following up all new projects from the development stage to mass production- Work closely with Mold shop team and Development team to ensure trials are conducted as per schedules and achieve lead-time without any problems. Besides, find out good solutions for each model to reduce development lead-time as much as possible.- Ensuring that the potential production issues will be identified and solved before mass production according to quality expectations.- Work closely with QA/ QC/ LAB to check and ensure the materials and products are tested with good performance and met the customer’s standards.- Make sure the concerns are well communicated and followed up on solutions- Supervising and directing to train all production team leaders to increase their skill in injection molding.- Always improving the production lines and quality to increase the output capacity to ensure the delivery is on time. Show less

• Mold Project Leader

  • Oct 2010 - Jul 2012

  - Manage and leading mold testing department.- Control injection testing, trial for all new development projects- Set up, find the right standard injection condition for new projects, and transfer to the Production department. - Communicate all injection molding issues through written reports/updates as needed.- Repair the molds if found problems to ensure the molds are always in good condition before sending them to the Production department.- Make the planning to inject sample products, development samples for customers.- Work closely with QA/ LAB team to check and ensure the materials and products are tested with good performance and met the customer’s standards. Show less

• Production Shift Supervisor

  • Dec 2007 - Sep 2010

  - Arrange and manage worker to maintain good discipline and achieving production target.- Supervise the team to produce high quality products on time.- Guide the member of team to do the jobs as standards and guidelines to make sure under control.- Daily work through production for have a look onto machine running, process flow, quality to make sure everything is under control- Work close with the other teams such as mold shop, color room, QC in order to improve the things- Implement SOP and JI for production. 6S implementation and improvements for production. Show less



Ever Tech Plastic VN

• Mold Shop Supervisor

  • Jul 2006 - Nov 2007

  - Manage all groups in mold shop to maintain good discipline and achieving mold making target.- Supervise the team to make high quality molds on time and follow the working process.- Check the mold accessory; make planning to order the accessory for molds.- Ensure the quality of all new molds before sending to customers.- Report to BOD monthly the status of mold making and repairing.- Do the improvements for all activities in work shop.

• Production Shift Leader

  • Mar 2003 - Jun 2006

  - Make planning, organize, and control all activities in shift. Maintain good discipline to achieving production target. - Implement daily production plan and control production process- Supervising and speed up the teams to work to get high output, high quality and catch the ETD- Popularize the key requirements such as quality standards, SOP, what to take care in the production, to enhance the productivity, quality, and safety- Manage machinery, equipment. Solving the technical issues in production… Show less



Golden Top Co, Ltd

• Biên Hòa, Dong Nai, Vietnam

• Production Technician staff

  • Jan 2001 - Mar 2003

  Setting the parameter for injection molding machine. Control all products in cells in charge to ensure productivity, quality… Manage workers in cells in charge Monitor and report the working result to Shift leader. Setting the parameter for injection molding machine. Control all products in cells in charge to ensure productivity, quality… Manage workers in cells in charge Monitor and report the working result to Shift leader.