HSEQ Coordinator

• Nov 2018 - Present

HSEO P&E

• Nov 2016 - Present

1. Advise management on the following: · Ways to prevent injury to personnel, damage to plant and/or equipment and fires. · Ways to improve existing work methods. · Legal and contractual requirements affecting safety, health and welfare. · Provision and use of protective clothing and equipment. · Potential hazards on site before work starts and on the safety organization and fire precautions required. · Changes in safety requirements 2. Carry out site surveys to see that only safe work methods are in operation, that health and safety requirements are being observed, and welfare and first aid facilities are adequate and properly maintained. 3. Determine the cause of any accident (or dangerous occurrence), and recommend means of preventing recurrence of such an incident. 4. Supervise the recording and analysis of information on injuries, damage and production loss. Assess accident trends and review overall safety performance. 5. Assist with training employees at all levels. 6. Take part in discussions on injury, damage and loss control. 7. Keep up-to-date with recommended codes of practice and safety literature. Circulate information applicable to each level of employees. 8. Foster within the company an understanding that injury prevention and damage control are an integral part of business and operational efficiency. 9. Attend job progress meetings where safety is an item on the agenda. Report on job safety performance. Show less

HSE P. Controller

• May 2014 - Sep 2016

Major duty &Responsibility is to assist Project Management Team (PMT) & HSE Manager in advising the management and contractors by reporting HSE related matter to PMT & HOD including monitoring the entire implementation of HSE matters compliance to legal, STX and Petronas Technical Std. requirements.  Administer the organization, procurement, allocation and distribution of approved personal protective equipment (PPE) for staffs such as safety shoes, ear plug/ muff, safety glass, safety harness, etc.  Organize, facilitate and conduct regular HSE inspection/ audits with Client/ Contractors. This include vehicles, machineries and tools, etc.  Organize and conduct regular HSE awareness training for staff and Contractors i.e. WAH, confined space . including first aid and emergency response training for ER Team.  Organize and conduct regular HSE monitoring as per Client and corporate requirements. They shall include noise, heat stress, audio-metric test, gasses emission, waste disposals, etc.  Organize, facilitate and implement HSE labeling and multiple signage requirement per local regulation and Petronas Technical Standard.  Organize and implement monthly HSE campaigns and program to promote safety and health per accepted by Client requirement  Provide the Work permit to STX or contractors for any site activities and verify its implementation at site  Develop and review policy, standards, manual, procedures and practices with Departmental Managers  Conduct investigation of safety incidents and to provide recommendations for avoidance of recurrence and this would include fire and dangerous occurrence.  Assist HSE Manager to manage and monitor overall implementation of OHSAS and QMS standard  Being a Secretary to a Chairman of HSE Committee team  Preparation and documentation of monthly HSE Report & weekly report.    Update and maintain Project Key Performance Indicator / Leading Indicators as monthly basis.  Show less

HSE Officer

• Aug 2012 - Oct 2013

Roles and Responsibilities of EHS officer monitors workplace activities to ensure that workers comply with company policies and government safety regulations. The duties of this job vary by employer, but safety officers typically have responsibilities pertaining to policy development, safety inspections, safety training and compliance with the federal Occupational Safety & Health Administration, commonly known as OSHA. Some safety officers, such as those in the construction industry, must have several years of field experience to qualify for this type of job. Safety Policies Developing and implementing safety policies helps employers reduce accident-related costs and prevent losses due to a decline in productivity. Workplace Inspections Safety officers inspect interior and exterior work areas to determine if there are any safety hazards. During these inspections, a safety officer looks for broken equipment and damaged equipment, slip-and-fall hazards and other potential hazards. The officer also observes workers to ensure that they are wearing required personal protective equipment and following company safety policies. In the construction industry. Related Reading: Safety Administrator Job Description & Duties Accident Investigations When a workplace accident occurs, a safety officer conducts an investigation to determine why the accident happened. The officer may question witnesses, inspect the accident scene and take pictures of any property damage. Once the officer determines the cause of the accident, he writes a report detailing the cause and provides recommendations that can help prevent future accidents. Training and Coaching OSHA requires employers to provide training on dozens of safety topics. These include fire prevention plans, . Regulatory Compliance Employers must comply with regulations published by OSHA and state occupational safety agencies. Show less

HSE Officer

• Jun 2011 - Jun 2012

to as per clients requirements  Liaise with the head of the unit or controlled entity OHS unit and other safety personnel  Excavations, confined spaces requirements ‘safe work method ’training for all construction workers  Review and analysis injury and incident reports and data & incident prevention strategic in the area  Monitor local area compliance with regard OHS policy and procedures  Training about working at height & fall protections to every worker.  Working closely with the managements and advising about the proper site safety requirements  Monitoring the activities to prevent people, plant, property &product from potential hazards at all locations.   Reminding all the workers that the safety is the best policy to target ZERO accident.  Preparing Risk assessments and discussing same with senior proper measures.  Monitor all workers that they are wearing safety paraphernalia at job site.  Preparation of daily reports regarding safety in the job site.  Always keep in touch with all workers to remind safety.  Checking all equipments (must be good condition).All equipments must be conducted monthly inspections ,color code ,checklist with regard.  To ensure all necessary safety precautions before starting all job at site.  Perform safety hazard inspection of construction work, lay down & living areas, to ensure their complaints with project safety and fire manuals etc.  keeping of all fire suppression system throughout the system.  Complete equipment safety management includes safety for all types of equipments like cranes, excavators, loaders etc.  Arrange periodic inspection for all equipment’s  The job includes safety management of all buildings, stores and workmen  Inspection equipments, tools(monthly & periodic inspections)  Preparing daily safety reports and requesting upgrades if necessary  Carryout regular safety audit.  Implementing rescue operations and emergency response procedures. Show less

Jr,Safety officer Plant -2

• Jan 2010 - Apr 2011

Role of HSE : Safety officer are appointed by JK Tyres Head of production units and are their delegated authority. They are responsible for: provide advice, information and instruction on local OHS issues Emphasize safety mandatory requirements during tyre production . To conduct various training with management and HOD Approval. Reduce the injury, accident ,comply ZERO Accident Policy. Prepare / update safety statistics of man hours / available chemical containment in storage . Take responsible for waste management plan . assist in the application of OHS procedures help manage risks and hazards in their area report and investigate incidents, injuries and hazards and implement agreed control measures liaise with their Head of academic/administrative unit, OH&S and other safety personnel review and analyse injury and incident reports and data develop injury and incident prevention strategies for their area monitor local area compliance with OHS policy and procedures audit local area OHS compliance with regard to risk, emergency and hazardous waste management help promote OHS awareness. Show less

Fire and Safety officer

• Feb 2008 - Feb 2010

1. Monitor conditions, activities, and operation: With a perceived risk, then take action 2. Ensure the establishment of safety precautions. 3. Monitor and report status of conditions, hazards, and risks to the I.C. 4. Ensure the Personnel Accountability System is being utilized 5. Receive a Incident Action Plan from the I.C.: Then provide a Risk Assessment of incident scene operations 6. Ensure the establishment of safety zones, collapse zones, hot zones, and other hazard areas: Communicate to all members present 7. Evaluate traffic hazards and apparatus placement: Take appropriate actions to mitigate hazards 8. Monitor radio transmissions: Stay alert for missed, unclear, or incomplete communications 9. Communicate to I.C. the need for assistants: Due to need, size, complexity, or duration 10. Survey and evaluate the hazards associated with a landing zone and interface with helicopters Show less