Experience

FORCE Technology

• Denmark
• Engineering Services
• 700 & Above Employee

• QC Coordinator

  • Feb 2023 - Present



Kiwa Denmark

• Denmark
• Professional Services
• 1 - 100 Employee

• Technical Manager - NDT

  • Sep 2021 - Feb 2023

  - Monitoring of NDT staff at Kiwa's customers - Updating of procedures and preparation of new - Maintenance and development of our quality manual for NDT - Maintain ISO 17025 accreditation in collaboration with QHSE Manager - Contributing to maintaining / lifting quality of the tasks Kiwa performs for our customers - Development of methods in collaboration with Head of NDT - Project management for medium and large tasks - Participate in major tenders to ensure that Kiwa uses the right methods - Participate in the international cooperation regarding NDT Show less



Maersk Drilling

• Denmark
• Oil and Gas
• 700 & Above Employee

• Senior Engineer NDT

  • Mar 2015 - Aug 2021

  Responsible for NDT maintenance strategies and setup of NDT-work scopes across the Maersk Drilling fleet in ERP systems SAP and IFS.Ensure NDT is carried out to meet requirements from e.g. clients, rules & regulations.Part of the POP300 (profit optimization program) focusing on alignment and reduction of NDT & inspection costs.Explore new ways to do structural integrity and corrosion inspections by implementing advanced NDT methods. Update of NDT procedures to ensure compliance with applicable rules.Daily correspondence with on-shore & off-shore Maersk Drilling employees and external suppliers to provide guidance in NDT and welding related matters.Perform criticality assessment of hull & structure of drilling units.Planning of corrosion/erosion measurement programs of piping systems on Maersk Drilling rigs.Structural inspection of tanks/void spaces and structure onboard Maersk Drilling assets during special periodic survey together with DNV surveyor.Participate in tender processes to secure frame agreements with NDT and Coating companies.Perform technical audits on suppliers of NDT -and coating services.Perform review and comment on OEM drilling equipment specific NDT procedures and inspection plans from e.g. NOV & MH Wirth.Optimize NDT scope by evaluating historical data with reliability engineer.Appointed Technical Authority for Structural Integrity & Coating in September 2018. FROSIO coating inspector course. Show less

• Senior NDT & Welding Specialist

  • May 2014 - Mar 2015

  I provide guidance how to perform repair welding and modifications on existing Maersk Drilling off-shore structures. This also comprises acceptance of welder’s qualifications, choice of WPS and application of NDT.Verify that class society rules from e.g. ABS, DNV or Lloyd's are followed.June 2014 examined ISO 9712/EN 473 level 3 in UTOctober 2014: Attended ASME IX welding standards course at TWI.December 2014: Maersk Endurer, Cameroon. Performed coating and structural inspection of preload -and ballast tanks according to ABS HIMP (Inspection grading criteria for the ABS hull inspection and maintenance program). Show less



FORCE Technology/FORCE Certification

• Brøndby

• NDT level 3 Instructor/Examiner (NDT training)

  • Jul 2008 - May 2014

  I am responsible for the development and teaching on NDT radiography courses at level 1, 2 and 3 incl. certification according to ISO 9712 and EN 4179. Updated the level 2 course to include theoretical and practical sessions regarding detection and evaluation of corrosion and erosion using radiographic techniques. Approved as examiner by FORCE Certification for ISO 9712 exams for NDT methods VT, PT, MT, UT and RT. I am appointed examiner in HT (hardness testing) according to Nordtest. Furthermore I teach in PMI testing and radiation safety approved by the Danish health physics authorities and do presentations regarding radiography at NDT seminars. Project leader on the implementation of interactive whiteboards and the use of iPads in classroom sessions. When time allows it I do NDT level 3 consultant work for external customers and I assist on the practical sessions on VT, MT and PT courses. Did the update of the Nordtest examiner handbook. Planned and coordinated the production of new sets of radiographs for ISO 9712 examination incl. key lists with defect types for welds in pipes and plates. During my employment period in the NDT training department I have been certified according to EN 473 and ISO 9712 level 3 in RT, VT, MT and PT. Certified IWI (international welding inspector) and PMI testing according to API 578 in 2012. EN 4179 level 2 in radiography at Aerospace Inspection Training (AIT) in 2013. Participated on digital radiography course for on-stream inspection in Aberdeen held by TWI in 2011. Participated in digital radiography course held by DGZFP held in Prague in 2014 with focus on the testing of welds using both image plates and digital flat panels according to ISO 17636-2. Show less



C & P Inspection

• NDT Senior Inspector

  • May 2007 - Jun 2008

  Employed by CPI as NDT senior technician and QC inspector. The entire period I worked as QC inspector for Alstom during the erection of a FGD ( flue-gas desulphurization) plant at the Danish powerplant Amagerværket. I was responsible for checking welding procedures, material certificates etc. and planning NDT testing according to EN 1090 with the Italian subcontractor. Employed by CPI as NDT senior technician and QC inspector. The entire period I worked as QC inspector for Alstom during the erection of a FGD ( flue-gas desulphurization) plant at the Danish powerplant Amagerværket. I was responsible for checking welding procedures, material certificates etc. and planning NDT testing according to EN 1090 with the Italian subcontractor.



FORCE Technology

• Denmark
• Engineering Services
• 700 & Above Employee

• NDT technician

  • Apr 2001 - May 2007

  Worked fulltime as NDT technician at FORCE Technology. Below are mentioned some highlights.Certified by Swedish SQC to perform VT 01 (underwater visual inspection using PTZ cameras on nuclear power plants to inspect for cracks, corrosion biological growth on coated surfaces.Certified by Swedish SQC to perform VT 01 moulding (making moulds both under – and above water on nuclear power plants in order to subsequently inspect the casts under microscope for cracks and other defects.Worked on Maersk Oil and Gas offshore platforms doing RBI and automated ultrasonic t-scan on pipes checking for corrosion and erosion using the FORCE technology systems PSP3 and PS4. Travelled to United Arab Emirates to inspect Maersk oil tanker for cracks in oil compartments and engine cylinders using UT and MT testing.Part of the FORCE Technology NDT maintenance team at Statoil refinery in Kalundborg. Doing various inspections for cracks, corrosion, erosion and debris mainly with ROSI (radiographic on-stream inspection) and manual UT. During shut-down periods I was responsible for communication, planning and reporting between Statoil and FORCE Technology.Certified to perform internal visual inspection by means of endoscopes and borescopes. Intensive experience from the medico industry in inspecting stainless steel piping systems internally for surface -and welding defects, foreign matter and discoloration.Performed surface measurement with optical profilers. Show less

• NDT technician / IT system administrator

  • Mar 2000 - Apr 2001

  Worked part time as NDT technician at FORCE Technology while finishing my education as IT system administrator.

• NDT Inspector

  • Apr 1997 - Mar 2000

  Employed as NDT technician at FORCE Technology. The first 18 months I was posted in Sweden performing UT testing on steel structures for the Øresund Bridge. Thereafter I was certified according to EN 473 level 2 in VT. During the summer of 1998 I was certified in Sweden by SQC in UT 01 (ultrasonic testing for IGSCC on nuclear powerplants using special probes). Worked on various Swedish nuclear powerplants performing UT and assisting underwater ultrasonic B-scan using manipulators.



Esbjerg Oilfield Services

• Esbjerg Area, Denmark

• NDT Inspector

  • Jun 1993 - Apr 1997

  Employed in the QO/QC department at the shipyard EOS (Esbjerg Oilfield Services). During this period I started as an NDT trainee and working primarily with testing of offshore platform structures and pipe spools. Gained experience in working according to ASME codes and standards. When I left EOS I was certified according to EN 473 level 2 in the methods MT, PT, UT and RT. Employed in the QO/QC department at the shipyard EOS (Esbjerg Oilfield Services). During this period I started as an NDT trainee and working primarily with testing of offshore platform structures and pipe spools. Gained experience in working according to ASME codes and standards. When I left EOS I was certified according to EN 473 level 2 in the methods MT, PT, UT and RT.