Experience

SEQENS Custom and Specialties

• United Kingdom
• Chemical Manufacturing
• 1 - 100 Employee

• Permit Coordinator

  • Mar 2020 - Present

  Middlesbrough, England, United Kingdom



ALTRAD

• France
• Environmental Services
• 700 & Above Employee

• Permit Coordinator

  • May 2019 - Oct 2019

  Aberdeen, Clair Ridge Project  Preparation of Permits and site visits during the planning of all Fabric Maintenance work scopes prior to Area Authority verification ensuring all hazards and controls have been identified and the controls are in place.  Ensuring that the Work Control Certificates (WCC’s) required for the upcoming 12 hrs are listed and the appropriate Area Authority notified.  Ensure that Project priority work scopes are highlighted, managed safely and efficiently through the permit… Show more  Preparation of Permits and site visits during the planning of all Fabric Maintenance work scopes prior to Area Authority verification ensuring all hazards and controls have been identified and the controls are in place.  Ensuring that the Work Control Certificates (WCC’s) required for the upcoming 12 hrs are listed and the appropriate Area Authority notified.  Ensure that Project priority work scopes are highlighted, managed safely and efficiently through the permit process.  Undertake worksite inspections prior to, during and on completion of work tasks.  Undertake work site monitoring checks as defined as part of the Risk Assessment process.  Maintaining a E-Cow Competency register  Assisting the Control of Work Competency Assurance Assessor in the PA competency process.  Being the focal point for the administration and co-ordination of all permits, including those permits that are suspended, but where the work is not complete.  Supply accurate data and reports regarding PTW status to the offshore and onshore management team. Show less



MDE Group

• Norway
• Staffing and Recruiting
• 200 - 300 Employee

• Area Authorithy Delegate

  • Mar 2019 - May 2019

  Culzean Project Carrying out pre-work start site visits for Control of Work. Countersign Permit to verify pre-start checks have been completed. Attend Toolbox talks when required (including 1st issue and Level 2 Risk Assessed permits). Visit active permit worksites to carry out site monitoring checks. Coaching on how to improve Toolbox talks. Carrying out Performing Authority and Performing Authority Delegate training sessions. Demonstrate personal HSE leadership and excellent HSE behaviours… Show more Carrying out pre-work start site visits for Control of Work. Countersign Permit to verify pre-start checks have been completed. Attend Toolbox talks when required (including 1st issue and Level 2 Risk Assessed permits). Visit active permit worksites to carry out site monitoring checks. Coaching on how to improve Toolbox talks. Carrying out Performing Authority and Performing Authority Delegate training sessions. Demonstrate personal HSE leadership and excellent HSE behaviours at all times and ensure that safety expectations are communicated and maintained. Carry out duties Authorised Gas Tester, monitoring worksites and countersigning Permits requiring Gas Tests before issue. Show less



Global Resources (Odfjell Drilling)

• Technical Coordinator

  • Jul 2018 - Nov 2018

  Aberdeen Following on from the work with QEDi I was asked to be part of a small team. Our mission was to complete outstanding Commissioning workscopes and Hand systems over to the Drilling Operations and Maintenance teams. With a high focus on Safety my duties included ensuring all relevant paperwork required to execute our work scopes were prepared. Keep the onboard Operations and Maintenance teams aware of our ongoing workscopes. Involve Third party personal of our duties and requirements. Complete… Show more Following on from the work with QEDi I was asked to be part of a small team. Our mission was to complete outstanding Commissioning workscopes and Hand systems over to the Drilling Operations and Maintenance teams. With a high focus on Safety my duties included ensuring all relevant paperwork required to execute our work scopes were prepared. Keep the onboard Operations and Maintenance teams aware of our ongoing workscopes. Involve Third party personal of our duties and requirements. Complete a weekly Report to Onshore Support highlighting % of work complete and highlight outstanding work to be completed. The management of the Flange Management Systems (Drilling Systems). Hands on duties include the setting up/carrying out Commissioning Tests Show less



Amec Foster Wheeler

• United Kingdom
• Oil and Gas
• 700 & Above Employee

• Senior Mechanical Commissioning Technician/Control of Work Co-ordinator

  • Feb 2017 - Jul 2018

  Clair Ridge Initially taken on as Mechanical Technician commissioning Topsides and HVAC equipment before being asked to move over to the Drilling Commissioning Team. Were duties included the preparation of worksites for Dynamic Commissioning. Working alongside Specialised Vendors and within a Drilling Commissioning Team completing Dynamic Commissioning of Drilling Equipment and handing over to the on-board Drilling Operations Team. All work carried out following Project Procedures.

• Commissioning Control of Work Coordindinator

  • Aug 2015 - Jan 2017

  BP Clair Ridge Responsible for the monitoring, control and Supervision of the Commissioning Permit-to-Work system on the Clair Ridge Project. Working within BP’s ISSOW control of work system. Duties include the checking of all Permit documentation, carry out work site visits to ensure BP procedural compliance. Liaising with other Control of Work teams (BP Operations, Construction and Cape) identifying Simops and any others issues which may hinder the safe progress/completion of the project. Attend Permit… Show more Responsible for the monitoring, control and Supervision of the Commissioning Permit-to-Work system on the Clair Ridge Project. Working within BP’s ISSOW control of work system. Duties include the checking of all Permit documentation, carry out work site visits to ensure BP procedural compliance. Liaising with other Control of Work teams (BP Operations, Construction and Cape) identifying Simops and any others issues which may hinder the safe progress/completion of the project. Attend Permit and Commissioning Supervisory meetings. Liaise with Commissioning Supervisors and Technicians attending to daily Control of Work issues with may affect there completion of their duties in a safe and controlled manner.



Maersk Fpsos A/S

• Oil and Gas
• 1 - 100 Employee

• Permit Co-ordinator

  • Jan 2014 - Jul 2015

  North Sea Producer Responsible for the monitoring, control and Supervision of the Permit-to-Work system. And for the administration of the Permit-to-Work system and all associated certification, as per the company’s Safety Management system (Sirius). Ensure Gas monitors are maintained and Calibrated. Carry out Work site inspections and carry out and monitor Permit-to-Work Audits.



A.P. Moller - Maersk

• Denmark
• Transportation, Logistics, Supply Chain and Storage
• 700 & Above Employee

• Lead Mechanical Technician

  • Jun 1996 - Jul 2015

  North Sea Producer Employed on the North Sea Producer floating production/storage facility as Lead Mechanical Technician. I joined the vessel at the initial conversion stage in Middlesbrough, Cleveland, were I was seconded to the Commissioning team I worked alongside Commissioning Engineers on Documentation and inspection of new and used equipment. Later we worked along side the Hook-up team. On completion of these phases I assumed my role as Lead Mechanical Technician, duties consist of the planning of all… Show more Employed on the North Sea Producer floating production/storage facility as Lead Mechanical Technician. I joined the vessel at the initial conversion stage in Middlesbrough, Cleveland, were I was seconded to the Commissioning team I worked alongside Commissioning Engineers on Documentation and inspection of new and used equipment. Later we worked along side the Hook-up team. On completion of these phases I assumed my role as Lead Mechanical Technician, duties consist of the planning of all day-day mechanical activities, supervising of co-workers and contract labour and delegation of tasks. We work within a Planned Maintenance system (Maximo). This system also aids us organising of spares and checking of work histories. I adopt a fault finding and problem solving approach and complete verbal and written reports. I adhere to the Companies policies and procedures at all times. My main responsibility is to keep down time to a minimum. I communicate with technical specialists and interpret technical drawings and documents and employ a good knowledge of mechanical maintenance methods and equipment. In addition to the above I mentor junior and less experienced staff, providing advice, education and counselling as appropriate. This in turn facilitates in the efficient operation of the plant. Show less



Midland Scottish Resources

• Lead Mechanical Technician

  • Apr 1991 - Mar 1996

  Emerald Field Employed on the "Emerald Producer" floating production facility. Initially joining as a Mechanical Technician I was promoted up to Lead Mechanical Technician. I remained with the unit until it was de-commissioned. Work duties included:- The planning and organising of all mechanical tasks. The Maintenance, Monitoring of all equipment both Production and Marine and the recording of all mechanical faults and work. The Commissioning of new/overhauled plant and equipment. Liaising with… Show more Employed on the "Emerald Producer" floating production facility. Initially joining as a Mechanical Technician I was promoted up to Lead Mechanical Technician. I remained with the unit until it was de-commissioned. Work duties included:- The planning and organising of all mechanical tasks. The Maintenance, Monitoring of all equipment both Production and Marine and the recording of all mechanical faults and work. The Commissioning of new/overhauled plant and equipment. Liaising with Onshore Support Team. The ordering of plant equipment and tools. Plant and machinery included Gas turbines (Solar), generators (CAT and Hedemoras Drives), pumps and utilities. Prior to joining the Maintenance Team, I worked as part of the Commissioning Team. Working alongside “Davy Offshore” Commissioning Technicians. Main Duties included Commissioning, working from Drawings, establishing Test boundaries, liaising with Third Parties (MSR/Lloyds) to witness all Tests. On completion of all Tests the plant was then prepared ready to bring On-line. Show less



ISCOR, South Africa

• Mechanical Technician

  • Jan 1983 - Oct 1988