Experience

Peplink

• Computer Networking Products
• 100 - 200 Employee

• Sr. Mechanical Engineer

  • Apr 2019 - Present

  Sr. Mechanical Engineer. In charge of the LTE Switch and WiFi AP on ME. The new product development from concept to the product launch. Management the ODM/OEM for the new product development and the manufacture. Sr. Mechanical Engineer. In charge of the LTE Switch and WiFi AP on ME. The new product development from concept to the product launch. Management the ODM/OEM for the new product development and the manufacture.



智捷科技股份有限公司

• 新竹市

• Project Manager

  • Nov 2016 - Mar 2019

  AS the ME team leader. Product spec review and test plan review for the new project. Arrange the development plan and schedule as the mechanical function for the new project. Cost estimate for the new project. Responsible for manufacturing supplier selection for the new project. Mechanical design for the new project with cross function team. Mechanical drawing review. FMEA report review. Cost review for the mechanical part and packing part. Manage the trial run for the new project to mass production. Review and verify the FAI & Cpk report for the new material. Survey the new vendor and audit the existing vendor in the product development phases. Survey the new material of the mechanical. Survey and optimize the manufacturing process for mass production. Participate the reliability test for the new product and solve the problem of the quality. Troubleshooting for all of the mechanical issue for the product. Assembly fixture design and verify. Training the new ME. Manage and audit all of the manufacturing supplier, such as tooling, injection, sheet metal, heat sink, thermal adhesive, cable, antenna, packing, and mylar etc. Direct report to the president of the company.



KYE Systems Corp

• Taiwan
• Computer Hardware Manufacturing
• 1 - 100 Employee

• Mechanical Engineer

  • Nov 2015 - Apr 2016

  Project leader. As a project leader of active capacitive stylus. Conduct a RD team to developing an active capacitive stylus. Raised a new team to develop a new product, the product is totally new for our company. Be a project leader, I encourage all of team member to find and try any solution to gain a success. Finally, we are helping our company to establish a new product. Base on the new product, we also created a new product line for the company. Finished a research for the waterproof test equipment, the equipment is for the IPX6 criteria and will be used at the assembly line.



Wistron

• Taiwan
• Appliances, Electrical, and Electronics Manufacturing
• 700 & Above Employee

• Chife Mechanical Engineer

  • Mar 2015 - Nov 2015

  PM of ME As a coordinator and interface between the customer and the company for the ME function. As a coordinator and interface between the cross function and the ME team. Daily review the schedule of the ME issue. Conduct the ME team to do the root cause analysis, check the solution and implement. Preparing the weekly report of the project for the weekly review meeting. PM of ME As a coordinator and interface between the customer and the company for the ME function. As a coordinator and interface between the cross function and the ME team. Daily review the schedule of the ME issue. Conduct the ME team to do the root cause analysis, check the solution and implement. Preparing the weekly report of the project for the weekly review meeting.



ROCCAT

• Germany
• Computer Hardware Manufacturing
• 1 - 100 Employee

• Sr. Mechanical Engineer

  • Jan 2014 - Mar 2015

  ME auditor, work with ODM partners to finalize the product design base on the product spec. Participates to review the mechanism design with the ODM and accomplish the design issues. Participates in the tooling design and the manufacturability review. Participates in product phase builds (mockup, EVT, DVT, PVT, mass production). ME auditor, work with ODM partners to finalize the product design base on the product spec. Participates to review the mechanism design with the ODM and accomplish the design issues. Participates in the tooling design and the manufacturability review. Participates in product phase builds (mockup, EVT, DVT, PVT, mass production).



ACTi Corporation

• Taiwan
• Security and Investigations
• 100 - 200 Employee

• Mechanilcal Manager

  • Jun 2010 - Mar 2013

  Training and supervising a staff of 8~10. Conduct the ME team to achieve all kind of IP camera which including indoor and outdoor product. Conduct the team to achieve the product development phase from product spec, ID concept design, mechanism design, and trial run until mass production. Participant in the product spec finalized with marketing team. Generate a proposal of the ID concept, based on the marketing spec. Cost saving for the product Reduced tooling cost by 50% through look for the new vender. Use the modularized design to reduce the cost. Lean design, in order to reduce the operator; implement the insert molding, double injection and SMD type…etc to save manpower. Established a database of common part, ask all of engineers must use the common part to do the design in.



Flex

• United States
• Appliances, Electrical, and Electronics Manufacturing
• 700 & Above Employee

• Sr mechanical engineer

  • Aug 2007 - May 2010

  ME team leader Training and supervising a staff of 5 Lead team to achieve all kind of notebook ME team leader Training and supervising a staff of 5 Lead team to achieve all kind of notebook



Inventec Appliances Corp

• Taiwan
• Appliances, Electrical, and Electronics Manufacturing
• 400 - 500 Employee

• Assistance Mechanical Mananger

  • Mar 1996 - Jul 2007

  Handle the smart phone of Palm, in charge of mechanic al design Handle the feature phone of OKWAP, In charge of mechanical design, estimate all coat for the mechanical portion, kick off the tooling, pilot run, reliability test, mass production, maintain BOM, issue ECN In charge of the factory transference from Taipei to shanghai by the company policy, setup the new factory in shanghai for 2 years Training and supervising a staff of 20 Handle the manufacture of IPod as a process engineer Handle the manufacture of TI Graphing Calculators as a process engineer