Mechanical Technician

• Sep 2022 - Present

Generator technician

• May 2022 - Sep 2022

Mechanical Technician

• Jan 2022 - May 2022

Mechanical Technician

• Sep 2021 - Dec 2021

Mechanical Technician

• Aug 2021 - Sep 2021

General maintenance work on conveyors, pumps, valves. General maintenance work on conveyors, pumps, valves.

Mechanical Field Service Technician

• Apr 2021 - Aug 2021

ExxonMobil Mossmorran, Propylene & Ethylene centrifugal compressors minor overhaul, Crack gas centrifugal compressors major overhaul. ExxonMobil Mossmorran, Propylene & Ethylene centrifugal compressors minor overhaul, Crack gas centrifugal compressors major overhaul.

Mechanical Technician

• Dec 2020 - Apr 2021

Mechanical Maintenance Technician and Performing Authority on the Alba FSU for Ithaca Energy. Mechanical Maintenance Technician and Performing Authority on the GP3 FPSO for neo energy. Framo oil pump strip down overhaul and rebuild. Dresser rand reciprocating compressor full strip down and rebuild new valves oil wipers and packing boxes fitted. Mechanical Maintenance Technician and Performing Authority on the Alba FSU for Ithaca Energy. Mechanical Maintenance Technician and Performing Authority on the GP3 FPSO for neo energy. Framo oil pump strip down overhaul and rebuild. Dresser rand reciprocating compressor full strip down and rebuild new valves oil wipers and packing boxes fitted.

Mechanical Field Service Technician

• Sep 2020 - Dec 2020

Saica Paper Mill Manchester steam turbine full strip down inspection, rebuild with alignments to gearbox & generator. Saica Paper Mill Manchester steam turbine full strip down inspection, rebuild with alignments to gearbox & generator.

Mechanical Technician

• Aug 2020 - Sep 2020

Screw conveyor change out for new screw re install with new bearings and chain drive. Screw conveyor change out for new screw re install with new bearings and chain drive.

Mechanical Field Service Technician

• Jun 2020 - Aug 2020

Killingholme power station, Siemens V94.2 GT, Combustion Chamber ceramic tile changeout. Killingholme power station, Siemens V94.2 GT, Combustion Chamber ceramic tile changeout.

Mechanical Field Service Technician

• Oct 2019 - Jun 2020

Dow Ternauzen, Crack gas centrifugal compressor train HP,LP,MP and steam turbine strip down overhaul and rebuild. Dow Ternauzen, Crack gas centrifugal compressor train HP,LP,MP and steam turbine strip down overhaul and rebuild.

Mechanical Field Service Technician

• Jun 2019 - Oct 2019

CF Billingham, NOX centrifugal compressor full machine and new rotor and seals, bearings changeout, axial compressor full strip down and rebuild. Ineos Grangemouth, Crack gas compressor train centrifugal HP,MP,LP machines strip down new rotors and seals fitted bearing checks and rebuild. CF Billingham, NOX centrifugal compressor full machine and new rotor and seals, bearings changeout, axial compressor full strip down and rebuild. Ineos Grangemouth, Crack gas compressor train centrifugal HP,MP,LP machines strip down new rotors and seals fitted bearing checks and rebuild.

Mechanical Commissioning Technician and Performing Authority

• Mar 2019 - Jun 2019

Total/Maersk Culzean hook up project Essentially the same work as my previous commissioning jobs offshore on the Clair Ridge and Montrose projects. Total/Maersk Culzean hook up project Essentially the same work as my previous commissioning jobs offshore on the Clair Ridge and Montrose projects.

Mechanical Field Service Technician

• Jul 2018 - Mar 2019

Project: Belgen steam turbine overhaul at the Corey energy for waste site in London Assigned to the magnus shutdown on a Pignone Compressor bearing and seal changeout and 2 Sulzer compressors complete Machine swop out. Complying with all relevant procedures and deliver high standards of safety performance during all operations. Responding promptly and effectively to changing circumstances, planning for contingencies and managing conflicting priorities. Supporting in all elements of health, safety, security and environmental aspect for the organisation. Working flexibly to accommodate the changing needs of the business; working long hours and taking on additional responsibility.

Mechanical Commissioning Technician

• Jul 2017 - Jun 2018

Vessel filling, venting, pressurisation, monitoring for various commissioning procedures. Dynamic commissioning of the oil stream systems. Barrier seal system filling, pressurisation, draining and monitoring. Part off the punch list team, duties included preparing and issuing permit packs with all the correct documentation include i.e. permits/tool box talks/risk assessments/marked up p and id drawings/marked up isometric drawings/materials orders/joint break out requests and any other documentation required for the job. Updating the master spreadsheet and organising work scope. Dealing efficiently and on own initiative with a high-volume workload. Completing all activities in a timely accurate and efficient manner in accordance with procedures and work instructions. Excellent communication skills at all levels while remaining dedicated to ensuring understanding of company requirements and procedures.

Mechanical Technician

• Jul 2017 - Aug 2017

Mechanical Technician on the decommissioning project for the Ninian north. Using Maximo , ISSOW and Bluebeam programs. Responsible for maintenance planning servicing and ordering materials for cummings K50 engined diesel generators. Mechanical Technician on the decommissioning project for the Ninian north. Using Maximo , ISSOW and Bluebeam programs. Responsible for maintenance planning servicing and ordering materials for cummings K50 engined diesel generators.

Mechanical Field Service Technician

• Mar 2017 - Jul 2017

Commissioning two Datum centrifugal LP MP compressor trains Motors and gearboxes and two Datum centrifugal HP compressors, motors and gearboxes. Using Rotalign pro and Rotalign to carry out alignment checks adjust and shim as necessary and monitor as suction and discharge pipework fitted advising on pipework pulling the motor out of alignment and how best to remedy this. Fitting of dry gas seals, bearings, hubs, spacers, couplings and pipework. Carrying out soft foot checks and rectifying problems encountered. Using a variety of measuring equipment, stick, inside, outside, depth micrometre, Vernier, clocks to ensure absolute accuracy in all aspects of work and recording data for the client.

Mechanical Commissioning Technician.

• Apr 2016 - Mar 2017

ISSOW trained and competent, writing permits and involved in writing risk assessments. Preservation of platform packages. P&ID line walks, creating punch lists, punch list clearance, red lining/green lining of drawings and mechanical completion acceptance for system handovers. Commissioning of critical systems including: Cooling Medium/ Hp LP Flare/ Firewater/ Power Generation LM2500 GE Turbine/ Gas Compression Dresser Rand Datum HP, MP, LP Compressors / Sea Water/ Water Injection/ Chemical Injection. Supervising Motor/pump no / load runs and recording data as per commissioning procedures and fault-finding if required. Assisting with venting, bleeding, flange disconnection/re-connection using correct gaskets & torque. Working closely alongside systems responsible engineers and vendors during dynamic commissioning of phase of all systems, drawing up and implementing commissioning procedures. Making up and compiling work packs ensuring all the correct documentation is present for each job.

Mechanical Technician

• Oct 2015 - Apr 2016

Project: Petro Rabigh and Petro Kimya Saudi Arabia Elliott 200 TC compressor and Elliott gearbox strip down for inspection, rebuild with new dry gas seal and alignment. Mitsubishi steam turbine strip down and new rotor rerate. Elliott LP, MP, HP compressors on the same train strip down, fit new diaphragms, labyrinth seals, dry gas seals bearings, rebuild and alignment. Solo runs and commissioning of above work on startup. Project: Petro Rabigh and Petro Kimya Saudi Arabia Elliott 200 TC compressor and Elliott gearbox strip down for inspection, rebuild with new dry gas seal and alignment. Mitsubishi steam turbine strip down and new rotor rerate. Elliott LP, MP, HP compressors on the same train strip down, fit new diaphragms, labyrinth seals, dry gas seals bearings, rebuild and alignment. Solo runs and commissioning of above work on startup.

Offshore Mechanical Technician

• Jun 2015 - Sep 2015

Carrying out Overhaul of PGT10 Pignone gas turbine. Machine alignments and run up commissioning. Pignone BCL type Compressor dry gas seal change out. Mann Turbo fire water pump engine strip and removal for overhaul. Voith Gearbox and fluid coupling on main oil line (MOL) package strip down for inspection and re assemble. Shutdown on the Sean Papa, Siemens STC-SV type compressor bundle change out. Experience as the performing authority under ISSOW. Carrying out Overhaul of PGT10 Pignone gas turbine. Machine alignments and run up commissioning. Pignone BCL type Compressor dry gas seal change out. Mann Turbo fire water pump engine strip and removal for overhaul. Voith Gearbox and fluid coupling on main oil line (MOL) package strip down for inspection and re assemble. Shutdown on the Sean Papa, Siemens STC-SV type compressor bundle change out. Experience as the performing authority under ISSOW.

Mechanical Technician

• Jun 2015 - Jun 2015

Removal of psv's, ball and gate valves, actuators, bonnet and bundle assemblies, manway doors, bridles, various pipe work for inspection and/or replacement. Replacing the above with new gaskets and bolts. Referring to p&id drawings, and work permits to complete the work scope. Commissioning of above work and start up assistance. Removal of psv's, ball and gate valves, actuators, bonnet and bundle assemblies, manway doors, bridles, various pipe work for inspection and/or replacement. Replacing the above with new gaskets and bolts. Referring to p&id drawings, and work permits to complete the work scope. Commissioning of above work and start up assistance.

Offshore Mechanical Technician at Global CPS Part of the Global Energy Group

• May 2015 - Jun 2015

Changing out the gearbox, lube oil filtration, and coupling guards on the Rolls Royce gas turbine on the Beryl Bravo shutdown. Consistently delivers a professional and positive outlook. Changing out the gearbox, lube oil filtration, and coupling guards on the Rolls Royce gas turbine on the Beryl Bravo shutdown. Consistently delivers a professional and positive outlook.

Mechanical Technician

• Feb 2015 - Apr 2015

Project: Perry Slingsby, the industry leader in ROV's Manufacturing and testing of hydraulic hoses from schematics. Routing, fitting and leak testing of Hydraulic hoses. Populating of manifolds and other ROV components with Swagelok, O-Ring face and JIC fittings. Installation of manipulators, sonar equipment, cameras, pressure gauges, lifting points, junction boxes, manifolds, HPU motor, buoyancy and thrusters. Commissioning of the ROV once completed including testing, troubleshooting and completions. Monitoring day to day activity and own quality levels.

Offshore Mechanical Technician at Global CPS Part of the Global Energy Group

• Apr 2014 - Jan 2015

Using p&ids to locate valves, pipework for removal and change out for new. Removal of gas turbine engine from the Beryl Bravo for overhaul. Following the permit to work system. Maintaining a high standard of health and safety always. Using p&ids to locate valves, pipework for removal and change out for new. Removal of gas turbine engine from the Beryl Bravo for overhaul. Following the permit to work system. Maintaining a high standard of health and safety always.

Offshore Mechanical Technician

• Sep 2013 - Apr 2014

Completing the world’s first offshore electrical substation HVDC platform in the world Fitting and commissioning pipework valves for various systems including, Sea Water/Firewater/Cooling Medium. Jacking operations, removal of 900 tonne capacity strand jacks and strands. Fitting of Super bolts the first ever used in the world with crane to replace Strand jacks. Installation of bell mouths, pipe bridges helicopter deck and many other components. Installation of 80 tonne cat tower. Maintaining a safe working environment at all times. Following the permit to work system.

Mechanical Technician

• Jun 1997 - Sep 2013

Time served mechanical fitter Workboat manufacture. Mobilisation and demobilisation of vessels. General fabrication. Ship and vessel repairs. Remove and refit and overhaul of motors, pumps, compressors and engines working on sites around Teesside. Time served mechanical fitter Workboat manufacture. Mobilisation and demobilisation of vessels. General fabrication. Ship and vessel repairs. Remove and refit and overhaul of motors, pumps, compressors and engines working on sites around Teesside.