Experience

SOCAR Petrofac Caspian • SPC

• Azerbaijan
• Oil and Gas
• 1 - 100 Employee

• Commissioning Instrumentation Field Specialist

  • Nov 2021 - Present

  • Relevant commissioning experience on Electrical Systems on onshore or offshore Oil & Gas, Petro-Chemical or Power Industry facilities, and demonstrate an understanding of Commissioning process including:-o Involvement with Engineering Contractor in design phaseo Interpretation of P&ID’s, loop diagrams, schematics and engineering datasheetso Commissioning of Fire and Gas, PCS, PSD systems and Safety Instrumented Systems• Control of Work / PTW processes during execution• Commissioning of utility and process systems• System Handover Management Process pre commissioning check sheet completion• Demonstrate personal HSSE leadership and excellent behaviours at all times, actively participate in the site safety observation conversation system• Communicate with technician reports daily and talk through the following days activities identifying any HSSE issues to be raised at toolbox talks• Attend all mandatory training as specified in HSE, and Permit To Work training schedule• Ensure all team members are fully aware and understand all the projects safe working practices and adhere to them to maintain a SAFE working environment• Responsible for the safety & management of all Instrument commissioning personnel and vendors reps under their control when on-site

• Senior Instrumentation Commissioning Technician

  • Jul 2021 - Nov 2021

  o Interpretation of P&ID’s, GA’s, Cause and Effects, Control narratives and engineering datasheets.o Commissioning of F&G, Safety Systems, large rotating packages, HVAC systems instrumentation.o Control of Work / PTW processes during executiono Commissioning of utility and process systemso System Handover Management Process pre commissioning check sheet completion• Demonstrate personal HSSE leadership and excellent HSE behaviours at all times and ensure that safety expectations are communicated and maintained. • Communicate with technician reports daily and talk through the following days activities identifying any HSSE issues to be raised at toolbox talks.• Attend all mandatory training as specified in HSE, and Permit To Work training schedule. • Ensure all team members are fully aware and understand all the projects safe working practices and adhere to them to maintain a SAFE working environment.• Ensure all team members adhere to the Permit to Work procedure and fully understand the process• Provide coaching / mentor national and junior team members as necessary• Assist technician reports to resolve any technical issues.• Ensure technicians submit daily the checksheets records of testing carried out.• Carry out mechanical completion line walks of instrument systems and compile punch lists in accordance with project specifications• Carry out line walks and apply instrument isolations where instructed and authorised.• Assist discipline engineers to compile Livening Up Notices to allow sub system/system energisation• Inspect and test instrument equipment in line with project specifications and complete the associated ITR paper work.• Take part in Sub System/System Mechanical Completion walk downs and punch list item categorization.• System Handover Management Process pre commissioning checksheet completion• As building instrument documentation in accordance with project procedure



SOCAR Polymer

• Azerbaijan
• Chemical Manufacturing
• 400 - 500 Employee

• Instrumentation Maintenance Supervisor

  • Jun 2018 - Jul 2021

  Supervising and also performing corrective preventive maintenance and corrective maintenanceand IPF tests on field instrumentsSchedule and control the routine, preventive overhauls and emergency maintenance within theallocated period of outage. Plan and manage time and manpower for executing the annual & majoroverhaulsUpdate, maintain records related to the maintenance work, maintain a master list of drawings,calibrate/test tools and equipmentPerforming personnel functions such as performance status,leave management, overtime etc.Ensuring all in-field activities carried out complying with Safety proceduresSupervising and coordinating the activities of maintenance team; daily WO,renovationsProvision of the technical evaluation to support Procurement Team, provision of the technicaldocuments, going through bidders to make sure about the reliability of the order.Review with department superintendent the department assets maintenance strategy, programs,and directions in compliance with vendor recommendations, codes and standards, and bestpractice to ensure effective maintenance activities and optimum asset life cycle cost.Supervise the Outsourcing Service ProvidersPlaning medium-term and short-term team goals,communicate priorities, assign tasks, and followup onBuild high team spirit, identify and develop people talent, Interview and select internal and externalcandidates for vacant positionsDiscussing with department superintendent the contractor scope of work (SOW)Liaising with technical department counterpartsIdentify, and Set-up resources to implement maintenance activities PM, CR, BR, PR, Inspection, andPerformance Monitoring to meet company targets and KPIs, ensure all maintenance activities andassets are reported correctlyContinuously Support cost-effective consumption and cost vs. benefit decision.Ensure spares are correctly described, ordered, receivedEnsure company MOC is embedded in all business activities as needed



bp

• France
• Business Consulting and Services
• 1 - 100 Employee

• Instrumentation Commissioning Engineer

  • Apr 2016 - Jun 2018

  Review and monitor the availability of drawings, specifications, job instructions, material deliveriesand toolsMonitor Contractor's detailed daily and weekly work plans following the overall planning schedule.Coordinate with Commissioning Team during the pre-commissioning phaseSupervise the Instrument Commissioning Team in meeting scheduled deadlinesProvide Ops with technical support throughout start-up,performance testing.Experience of GOC, punch listing, tri-party walk-downs and SIT's.Experience of fault analysis and maintenance on complex Instrument & Control systems.Detailed understanding of Foundation Fieldbus field Instrumentation, ICSS interfaces andCompressor Controls.Ensure Technicians work is carried out following site procedures and PTW system.Technical assistance and instruction contractor and vendor company's engineers for developingappropriate FAT/SAT/FTP/C&E Test procedures.Assist in Engineering to prepare the required handover documentation.Responsible for accepting on behalf of the company, all contractor pre-commissioning/commissioning tests and checksWorking on a wide range of instrumentation including temperature, level control, pressure, flowand vibration, keyphasorsConversant with DCS and Emerson Delta V. User of Emerson Delta-v ICSS PlatformCalibration loop checking of the field instruments (Emerson,Rosemount, ABB, Endress & Hauser,Yokogawa,)based on BP documentationFully trained to work on intrinsically safe equipmentWorking with all types of drawings especially loop drawings, P&ID, Layouts, C&E diagrams,instruments list, flow chart,datasheetsAware of Instrument Calibrators and HART communicator 475;Installation,checking and troubleshooting of Instrumentation and Control and safeguarding systemin process plants.Working on Fresh Water Maker, Flash Gas Compressors, MEG System, Cooling Medium,Condensate Booster and Export pumps, Fuel Gas, Nitrogen, etc.Highest levels of environmental and safety compliance



Rapid Solutions LTD

• Azerbaijan
• Oil and Gas
• 100 - 200 Employee

• Electrical and Instrumentation and Control Design Engineer

  • Jun 2014 - Apr 2016

  Ensure that designs comply with the relevant procedures, standards and regulations.Create electrical installation detail including SLD, panel layouts, cable and consumer listsReview and integrate designs, schematics, diagrams etc.Verify applicable engineering codes and standardsEstablishing process data for all applicable instruments/instrumentation systemsUnderstanding / identifying/collecting details of facilities to be providedPreparation of engineering/sizing calculations for various instrumentation systems andinstrumentsEstablishing operating procedures for ESD and C&E.Preparation of engineering drawings, installation details and diagramsDeveloping design engineering documents/drawings/bill of materialsCarry out work in accordance with company's and Health, Safety, Environmental and QualitysystemsCrating drawings, specifications, etc. following the application of basic scientific/engineeringprinciples and specific procedures. Performs design calculations and analysis.Using the CAD/CAM and database systems and facilities to make layouts, analyze designs, evaluateequipment systems and generate new equipment designs.Consults with other departments on equipment designs, problems and questions.Preparing data sheets valves, transmitters (flow, pressure, temperature, level, tank gauging, gasdetectors, etc.)Experience with systems testing, start-up and commissioning in Oil and Gas fieldsThe undertaking of SIL assessments in accordance with EN 61508Experienced user of CAD.Maintaining and modifying existing systems according to need of productionAnalyzing data and presenting findings in a written reportPreparing work packs after surveys to offshoreWorking collaboratively with design engineers, operation engineers, purchasers and draftsperson;Comprehend, interpret & prepare applicable technical information and to suggest design/processchanges to ensure simple, functional & cost-effective results.



Aztexnika LTD

• Azerbaijan
• Construction
• 1 - 100 Employee

• Spare Parts Ordering Specialist

  • Jul 2013 - Jul 2014

  Achieve timely arrival of all orders for parallel operation with the finances to pay for all customerorders without delayFinding new logistics companies to optimize the system "maximum income-minimum flow",punctuality and constant search for new customers, their involvement through the salesdepartments.Co-operation with key account customers and distributors (incentive programs planning andfulfilling)Marketing activities planning and accomplishing, Negotiating with existing customers and gettingnew customers,Orders execution procedure control, Market checks, store checks, competitors activities checks,Sales and other activity reports generating,Communication with production and logistic departments in order to satisfy customer needsObtain customers' names, addresses, and billing information, product numbers, and specificationsof items to be purchased, and enter this information on order forms.Prepare invoices, shipping documents, and contracts.Inform customers by mail or telephone of order information, such as unit prices, shipping dates,and any anticipated delays.Receive and respond to customer complaints.Verify customer and order information for correctness, checking it against previously obtainedinformation as necessary.Direct specified departments or units to prepare and ship orders to designated locations.Finding OEM Parts and defining the alignment with original spare partsordering and purchasing automotive parts; verify parts numbers from appropriate ; preparation ofthe purchase request.Contacts vendors for ordering parts.Maintains petty cash records for reimbursement.Checks all incoming purchases against invoicesMaintains a pending file of purchase orders and C.O.D.'s.stocks supplies in appropriate bins



Baku Biscuit Factory LTD

• Equipment adjuster and the Chief operator of equipment

  • Jul 2007 - Aug 2012

  Daily setting data for all of the equipment before starting, checking the status of the equipment,repairing the equipment in the team of adjustersManaging of all of the processes with 3 touch screens which are situated in any distance from oneanother, the equipment has length 28 metersPreparing the machine for each production task including the entering of information such assizes, shapes or cutting information into computer-controlled machines, or adjusting machinesettings such as speedPerforming tests to ensure the machine is set properly, and then operate the machine for normalproduction. This can include putting each part or piece into the machine unless theControlling the fully automated production line as per manuals and procedures.Responsible for all type of failures through the troubleshooting and fault-finding,Checking the faulty, damaged, broken spare parts, finding spare parts in the local marketWorking following the HSSE rules.References parts manuals for the location of part, application, quantities, eligibility, and pricing forthe failed part.Equipment mechanical breakdown knowledge.Able to work well under pressure and multi-task in a fast-paced environment.Maintenance of all bakery equipment, in case of any electromechanical issues.