Property Developer | Co-founder

• Apr 2021 - Present

Property development and letting. We are always looking for Freehold Blocks, both residential and mixed use, across Southern England & Wales. We offer HMWI and Sophisticated Investors, fantastic returns. Property development and letting. We are always looking for Freehold Blocks, both residential and mixed use, across Southern England & Wales. We offer HMWI and Sophisticated Investors, fantastic returns.

Founder

• Apr 2018 - Present

UK property development, residential lets, and property management. UK property development, residential lets, and property management.

Programme Manager

• Dec 2017 - Oct 2022

Programme Manager for a leading Silicon Valley based semiconductor company Programme Manager for a leading Silicon Valley based semiconductor company

Director

• Feb 2007 - Mar 2020

Project Services & Engineering Consultancy, based in the South West, Industry experience includes Defence, Oil & Gas, Renewables (Tidal, Hydro), Nuclear Decommissioning and Aerospace. Long term client engagements, and short term consultancy/advisory roles. Project Services & Engineering Consultancy, based in the South West, Industry experience includes Defence, Oil & Gas, Renewables (Tidal, Hydro), Nuclear Decommissioning and Aerospace. Long term client engagements, and short term consultancy/advisory roles.

Project Manager

• Jun 2016 - Dec 2017

Project Manager

• Mar 2016 - May 2016

Project Management consultancy role for a Hydro Power (Renewable Energy) company, advising on Project Management Office (PMO) setup. Project Management consultancy role for a Hydro Power (Renewable Energy) company, advising on Project Management Office (PMO) setup.

Programme Manager

• Aug 2015 - Mar 2016

New Product Introduction Programme Manager. Programme Manager for two key subsea services products within Well Access; WOCM (Work Over Control Module - Hydraulic) and PISEM (PLC in Subsea Electronics Module), part of a SIL rated Safety System. Programme covers Hydro-mechanical, Electrical/Electronic, Software, and Test Equipment, running teams, across 4 sites, 2 different continents. Risk Mitigation using Active Risk Manager (ARM) Bid Support New Product Introduction Programme Manager. Programme Manager for two key subsea services products within Well Access; WOCM (Work Over Control Module - Hydraulic) and PISEM (PLC in Subsea Electronics Module), part of a SIL rated Safety System. Programme covers Hydro-mechanical, Electrical/Electronic, Software, and Test Equipment, running teams, across 4 sites, 2 different continents. Risk Mitigation using Active Risk Manager (ARM) Bid Support

Project Engineer

• May 2015 - Aug 2015

Transition Team Project Engineer Transition Team Project Engineer

Project Engineer

• Mar 2012 - Sep 2012

Project Engineer (Offshore Deck Handling Systems). • Customer facing role on an Oil & Gas Programme with Shell. • Marine Mechanical Handling, Deck Integration, Launch and Recovery Systems (LARS) for an Autonomous Underwater Vehicle (AUV). • Specifying Mechanical Handling Equipment, for use in an offshore environment. • Identifying, managing, and mitigating risk on deep water trials. • Liaising with Systems/Mechanical/Electronic Engineers, as well as customers, and supply chain. • Co-ordination, and witnessing, of load tests, proof tests, FAT, and ordering in NDT work. Show less

Project Systems Engineer

• Jan 2012 - Mar 2012

Systems and Project Engineering for a MRAP (mine-resistant, ambush-protected) vehicle programme. Systems and Project Engineering for a MRAP (mine-resistant, ambush-protected) vehicle programme.

Mechanical Project Engineer (Contract)

• Jan 2011 - Jan 2012

Tidal Generation Ltd/Rolls Royce Energy, Bristol. Mechanical/Project Engineer on a sub-sea Tidal Generation project. Specifying components and sub-assemblies, such as hydraulic power packs, pumps, UPS, bilge and ballast systems, turbine blade pitch systems, for a sub-sea application. Working with suppliers to develop bespoke systems to suit the project. Writing and issuing technical requirement specifications. Mechanical design using Inventor 2011. 3D modelling, weldment design, drafting. Show less

Mechanical Engineer (Contract)

• Oct 2010 - Feb 2011

Short, fast paced contract for Thales Air Operations. Mechanical design of Deployable Radar Systems (Pro-Engineer Wildfire 4). Ergonomics/Human Factors Engineering to MIL-STD-1472. Bespoke 20' ISO Container & 19” Rack Systems (electrical enclosures). Short, fast paced contract for Thales Air Operations. Mechanical design of Deployable Radar Systems (Pro-Engineer Wildfire 4). Ergonomics/Human Factors Engineering to MIL-STD-1472. Bespoke 20' ISO Container & 19” Rack Systems (electrical enclosures).

Mechanical Engineer (Contract)

• Aug 2007 - Oct 2010

Mechanical/Project Engineering, Managing sub-contractor work packages, ensuring compliance with the project requirements and designing equipment (an actuation system). Conceptual design of missile systems and UAVs (using Pro-Engineer). Attending Systems Engineering meetings, interfacing with a multi-disciplinary project team and co-ordinating the work of the mechanical design team. Reporting design progress to engineering directors through weekly and 'phase completion' written reports. Packaging of sub-systems (navigation, comms, fuel, payload, etc.) in missiles. Designing, modelling and drafting/detailing of mechanical equipment (Pro-Engineer) Show less

Mechanical Engineer (Contract)

• Aug 2007 - Apr 2008

Project Engineering role on an electrical Fin Actuation System project. Defining requirements and writing technical requirement specifications, liaising with the customer, and managing sub-system suppliers. Ensuring equipment met environmental specifications (temperature extremes, salt water spray, shock and vibration). Project Engineering role on an electrical Fin Actuation System project. Defining requirements and writing technical requirement specifications, liaising with the customer, and managing sub-system suppliers. Ensuring equipment met environmental specifications (temperature extremes, salt water spray, shock and vibration).

Mechanical Engineer (Contract)

• Oct 2005 - Aug 2007

Mechanical Handling equipment design and project engineering for a Nuclear Decommissioning Project. Responsible for Magnox Flask Mechanical lifting special purpose machinery. Defining requirements and producing specifications/datasheets for sub-suppliers to provide motors, gearboxes, screw jacks, and sensors in accordance with project requirements. Designing in appropriate safety controls for this highly regulated, safety critical industry. Mechanical Design of cranes, crane components, and lifting equipment. Solid Edge 3D Design: Modelling, Surfacing, Assemblies, Drafting/Detailing. Show less

Design Engineer (Contract)

• Jul 2005 - Aug 2005

Conceptual Research & Development of consumer electrical products, through sketching, hands-on prototype model making, and Unigraphics design. This focussed on mechanism design in injection moulded plastic products. Conceptual Research & Development of consumer electrical products, through sketching, hands-on prototype model making, and Unigraphics design. This focussed on mechanism design in injection moulded plastic products.

Design & Development Engineer (Contract)

• Oct 2004 - May 2005

Research & development of industrial Water Meters, using Solid Edge. Designs developed by in-house test engineering of rapid prototypes and by the CFD package CFDesign V7. Research & development of industrial Water Meters, using Solid Edge. Designs developed by in-house test engineering of rapid prototypes and by the CFD package CFDesign V7.

Project Manager (contract)

• Mar 2004 - Sep 2004

Project Management of the design phase for a Bio-medicinal device (complex plastic inhaler). Involved working closely with the internal Tooling Manager, managing design consultancies, working closely with supplier project teams to solve technical problems, and liaising with the external tooling partner to bring the design into manufacture. Project Management of the design phase for a Bio-medicinal device (complex plastic inhaler). Involved working closely with the internal Tooling Manager, managing design consultancies, working closely with supplier project teams to solve technical problems, and liaising with the external tooling partner to bring the design into manufacture.

AutoCAD Engineer (Contract)

• Oct 2003 - Dec 2003

Responsibility for the migration of data to a new CAD platform, plus tooling design. Responsibility for the migration of data to a new CAD platform, plus tooling design.

Independent travel

• Sep 2002 - Sep 2003

Independent self funded travel. Independent self funded travel.

Design Engineer (Contract)

• Aug 2001 - Sep 2002

Design and modification of plastic injection moulded parts through solid, and surfacing techniques in IDEAS. Creation and modification of large assemblies, as well as modelling of metal castings and casting runs. Assisting Design Systems teams in data migration. Design and modification of plastic injection moulded parts through solid, and surfacing techniques in IDEAS. Creation and modification of large assemblies, as well as modelling of metal castings and casting runs. Assisting Design Systems teams in data migration.

Mechanical Design Engineer

• Nov 2000 - Aug 2001

Building Services Design for commercial and domestic premises. Building Services Design for commercial and domestic premises.

Trainee Design Engineer (Intern)

• Jun 1999 - Oct 1999

Member of a design team working on an automotive project, using SDRC-Ideas. The main design tasks involved component modelling, drafting and producing large assembly drawings for an automotive heater and air-con system. Member of a design team working on an automotive project, using SDRC-Ideas. The main design tasks involved component modelling, drafting and producing large assembly drawings for an automotive heater and air-con system.