Experience

Brightwaters Energy Limited

• Nigeria
• Outsourcing and Offshoring Consulting
• 1 - 100 Employee

• • Sep 2021 - Present

• • Sep 2021 - Oct 2022

  Responsible for ensuring adherence to Anantorupa’s Quality Management System,•Preparation of Inspection and Test Plans (ITP’s) ensuring all quality control activities are identified,hold/witness points set and approvals obtained from the Client.•Review and release of all technical documentation (drawings, specifications, etc.) for work execution.•Preparation of spool drawings for fabrication.•Review and approve Material Requisitions.•Perform receiving inspections of Code materials, prefabricated spools and pressure vessels.•Review and verify Material Test Reports (MTRs).•Control of nonconforming materials.•Verification of correct material release and traceability (identification) maintained throughoutmanufacture.•Notification of Client and/or AI prior to start of work and for witness or hold points.•Verification of welder qualification record suitability for scope of work.•Ensure control of welding consumables, included storage of low-hydrogen electrodes.•Verify that welding is being performed within the parameters of the accepted Welding ProcedureSpecification(s).•Perform visual inspection of joint preparation, fit-up, in-process welding and completed weld forcompliance with the WPS, client specifications and Code of Construction.•Prepare Nondestructive Examination (NDE) requests and review NDE Reports.•Prepare Post Weld Heat Treatment (PWHT) instructions and review final PWHT documentation toverify cycles meet or exceed the requirements of the applicable WPS(s).•Prepare pressure testing packages, obtain client written approvals and witness pressure tests.•Perform Quality Surveillances.•Assist with the identification, control and resolution of nonconforming product and services. Show less



FLONEX LIMITED

• Lagos, Nigeria

• QA/QC Inspection Engineer

  • Mar 2021 - Feb 2022

  • Visual vetting of calibration certificates and inspection of measuring instruments for tankage work. •Preparation of Quality documents; Tankage Methodology, PWHT, Hydrostatic test procedure, Vacuum box test procedure and Radiographic procedure. •Material receiving inspection of Shell plates, Bottom Plates, Roof structures, stairs and Appurtenances for 20% and 45% Bulk Caustic Storage Tank. •Witness Welders Qualification Test (WQT) and record the test conditions and Qualification Limits in the Welders Qualification Record (WQR) as per AWS D1.1 •Measure the Shell, Roof, Bottom and Structure plate cutting and rolling for 20% and 45% Bulk Caustic Storage Tank. •Measure and Visual inspect the butt weld of the Bottom Plate joint Fit – up for 20% and 45% Bulk Caustic Storage Tank. •Visual inspection and Record of Vacuum Box •Test in accordance with API 650 Code and Specification. •Visual inspection of the Back chipping, grinding and LPT of the Tank Shell Course Plates. •Visual inspection of the Final Weld of inside and outside of the Shell course plates in accordance with the approved drawing. •Visual Inspection and Peak, Plumb and Peaking Measurement of the of the Shell Course Plate in accordance with AFC/API 650. •Record the Radiographic film interpretation report for the Shell plates in the offering Report Sheet. •Visual inspect and record the Welding and Fit-up of the Roof and the Shell plate in accordance with the approved Drawings. •Witness and Record of the Vacuum box test carried out on the Roof plate joints. •Witness and Record Oil Chalk Test for the Roof to Shell plate in accordance ASME Sec VIII. •Visual Inspection and Record the Fit-ups and Weld of the Roof Structures to Roof Plate in accordance with the approved Drawing. •Visual inspection and Record of Hydro test Measurement. •Visual inspection and Records of External and Internal Blasting & Painting of the Caustic Tanks. Calibration, Final Box UP and Document Verification. Show less



Gamstec Integrated Services Limited

• 29 IGBO ETCHE ROAD PORT- HARCOURT, RIVER STATE.

• Quality Assurance and Quality Control Engineer

  • Feb 2018 - Dec 2020

  •Advice Contractor on Employer’s QA/QC requirements to ensure Contractor commitment and compliance is in line with Employer’s site specific quality requirements and procedures. • Review Contractor documents such as Project Quality Plan, Method Statements, KPIs, etc. • Assess construction and installation methods of construction and ensure that QA/QC procedures are adequately implemented. • Conduct formal site QA/QC inspections and QA/QC meetings on weekly basis with Contractor’s Site Management and ensure recommended remedial actions are closed by Contractor and reports are submitted to Employer. • Coordinate with Employer’s QA/QC Engineer to ensure that Employer’s QA/QC requirements and Key Performance Indicators (KPI), etc. are achieved at Site. • Audit Contractor’s Project Quality Plan, QA/QC Procedures, Site Activities and submit report to Employer and follow-up on Remedial Actions implemented by Contractor. • Closely monitor site activities and site conditions on daily basis to find out QA/QC non-conformances of Contractor and take appropriate remedial actions and report to Employer’s Project Manager. • Ensure that Project QA/QC programs and procedures are established, implemented, reviewed and improved as needed. • Prepare QA/QC Performance Reports weekly, monthly and annually, non-conformance trend analysis, remedial actions, etc. and submit to Employer. • Attend QA/QC Meetings with Contractor, and Weekly Progress Meetings if required by Construction Manager. • Closely monitor construction works, concrete pours and continuously check materials delivered to site, ensure compliance with QA/QC procedures, and ensure all tests are carried out as per contract requirements. • Coordinate with Consultant’s Document Controller and QA/QC Engineer to ensure that all documents are properly controlled. • Make sure that any non-conformity has been reported through a Non Conformance Report. Show less



DOTTED ENGINEERING SERVICES LIMITED

• Port Harcourt Nigeria

• Mechanical Field Engineer

  • Apr 2012 - May 2016

  • Provides technical assistance to the Mechanical or Equipment Superintendent, Area. • Superintendent and Area Engineer and keeps them informed on matters relating to quality control. • Establishes with the client personnel, parameters on testing, installation and turnover of systems and major equipment. • Determines area priorities for equipment installation through consultation with Area supervision. • Establishes communications with Design to resolve field problems. • Reviews the project schedule and working with the Mechanical or Equipment Superintendent and area Engineer, develops the 90/180 day schedules as required. • Performs inspection of all equipment installation work in progress on a continuing basis. • Witnesses tests and completes final equipment checks and tests prior to client turnover. • Assists the Mechanical Superintendent and Area Engineers in solving equipment problems. • Implements inspections of equipment installations. • Executes field takeoffs from design drawings and provides input to the quantity tracking system. • Reports weekly installed quantities to the Cost Engineer. • Writes material requisitions for all equipment testing equipment, spare parts, gaskets, and lubricants required for the job. • Maintains an open dialogue with site and factory vendor representatives to assess requirements and needs for having vendor representatives at the site. • Assists Area Engineers on equipment related problems to obtain vendor information, substitutions and other design related problems. • Assists the Field Procurement Supervisor in the inspection and receipt of piping materials and in the setting up of site controls for storage, protection, and maintenance of permanent plant equipment and associated materials. •Maintains as-built information for equipment installations. Show less



LEVENTIS MOTORS NIGERIA LIMITED

• 78/79 Aba Road Port Harcourt, Rivers State

• MECHANICAL SERVICE COORDINATOR

  • Jul 2010 - Feb 2012

  • Ensure proper inspection before acceptance from vendors of all vehicles (company-owned and leased). • Inspect all vehicles (company owned and leased) after visiting a workshop for repair and document the report of such. • Ensure that only suitable vehicles in good condition are deployed for service. Co-plan with the Head of Transport, the maintenance and scheduling to ensure availability of vehicles and vehicle accessories for effective operation. • Ensure that all operators have the required license for the type of vehicle being operated. • Evaluate and keep records/report of vehicle maintenance and servicing. • Develop and maintain standardized vehicle specifications that meet all operational requirements. • Carryout quarterly inspection/audit of operational vehicles in the fleet. • Report any hazard, accident and damage or defect in order that remedial action may be undertaken. • Report to the scene of any motor vehicle incident and prepare preliminary incident report and notification in Synergy reporting tool. • Participate in motor vehicle incident investigation and prepare detailed reports of incident investigation. • Follow up all preventive/corrective actions of Road Transport Accident(s) to closure. • Ensure compliance with all health, safety and environment regulations and policies relating to transport. • Participate in the pre-qualification assessment of vendors for driving monitors installation. • Ensure that the HSE requirements contained in the Land Transport Management System are complied with. • Manage the operation of inter-state movements in compliance with company's HSE and statutory requirement. • Liaise with HSE to promptly report, investigate and document all accident cases • Ensure that drivers are well motivated and trained on defensive driving techniques to meet the Service challenges as a team. • Check on a monthly and regularly basis, all leased/company-owned vehicles to ensure serviceability/conformity to company HSE standards. Show less