Experience

New England Plasma

• United States
• Aviation and Aerospace Component Manufacturing
• 1 - 100 Employee

• Quality Inspector

  • Jun 2018 - Present

  -Establish minimum action necessary to release part to the floor for processing. -Check all materials received for processing to verify the engineering drawing, approved OEM. -March purchase order requirements to process traveler including but not limited to: -Determine if FAA or Certificate of Conformance -Verify customer name, location and purchase order number -Part, job and serial number -SPM, EM, section and repair or applicable customer specifications including all revisions levels/dates -Coating specifications -Locate P/N, S/N and/or other markings on part and verify to process traveler and tags (if applicable). -If required, verify set-up sheet and hand tooling for proper fit/function. -Identify repair area(s) and inspect as necessary including pre-coat measurements and cut off dimensions. -Determine proper deposits for abradable, metallic and ceramic powder coating. -Use of Mitutoyo (SJ-201/SJ-210/SJ-410) Profilometer and performance of visual comparator in replacement if profilometer is unavailable. -Review the customer purchase order, drawing and/or applicable specifications for surface finish requirements, stylus type, traversing and cut-off length. -Analysis of quality data associated with nonconforming material and determining corrective actions. -Perform root cause reviews, review proposed re-work and establish preventative measures. -Maintain Corrective Action Database. -Confirm inspection package is complete. For contracted work, reviewing certifications and inspections of part dimensionally and visually for compliance. -100% complete visual inspection of hardware. Show less



MBS Fabrication, Inc.

• United States
• Appliances, Electrical, and Electronics Manufacturing
• 1 - 100 Employee

• Sheet Metal Fabricator

  • Feb 2013 - Aug 2017

  -Sheet Metal Fabrication for the Aerospace Industry. -Analysis, understanding and verification of military and corporation blueprints. -Maintain quality and production standards to coincide with ISO 9001: 2008 and AS9100 certifications. -Operation, understanding and calibration of fine measurement tools (micrometer, caliper etc.). -Usage of various types of machines, including but not limited to: Press Breaks, 15-20 ton Press, 100-300 ton Press and the ability to set, run and dismantle independently. -Repair of tools in die sets due to frequent usage. -Re-striking of parts after annealing process. -Holding tolerances to as little as 0.003 of an inch. -Meeting and maintaining a standard of less than 5% kick back from the QC and/or Inspection Department. -Documenting and maintaining all incoming inventory. -Training and mentoring of new existing employees in various functions. Show less