Senior Engineering Manager

• Mar 2019 - Present

Mechanical Project Engineer

• Oct 2017 - Mar 2019

Lead Engineer - Mechanical P.E. Consultant

• Mar 2017 - Oct 2017

Austin Bergstrom International Airport (ABIA) Hilton Hotel Indoor Air Quality Project – Austin, TX • Conducted site investigation and indoor air quality analysis for the ABIA Hilton hotel. • Inspected all building HVAC systems including the chilled water plant, fan coil units serving the suites, air handling units serving the common areas and energy recovery ventilators providing pre-treated fresh outdoor air into most of the rooms and areas of the building. Verified the existing conditions, sequence of operations and specifications of all the equipment inspected. • All data collected at the site investigation was incorporated into a Trace 700 model to simulate the overall building HVAC design and analyze the performance of the systems. • Design alternatives and solutions to improve the indoor air quality of the hotel were prepared and presented including replacement of existing energy recovery ventilators with similar or new/improved technology (sustainable scenario), modifications to the existing air handling units with variable frequency drives, installation of humidity controls and addition of new air handling/dehumidification units. Wilson Montessori School Commissioning (Cx) Project – Houston, TX • Provided engineering and technical assistance during the commissioning process of the Wilson Montessori School ensuring that all building systems performed interactively according to the design intent and the owner’s operational needs. • Performed site inspections during construction phase to ensure applicable systems were installed properly and received adequate testing. • The commissioning scope of this project was intended to comply with the requirements of LEED – Schools version 3.0.

Engineering Project Manager

• May 2011 - Mar 2017

• Lead design engineer and project manager in a multi-family residential/light commercial design firm. • Responsibility of coordinating design scope, implications and schedules with coworkers, clients, architects, jurisdiction building officials, contractors, product representatives and other disciplines to provide the most cost-effective, high quality and reliable design product and meet all project deadlines. • Provided coordination, design and project management input in multiple aspects of MEP engineering in over 500 projects nationwide. • Trained new team members to company standards, code requirements and design procedures in order to achieve project deliverables. • Conducted quality assurance and quality control of all mechanical/HVAC and plumbing as well as some electrical design to ensure code compliant engineering applications. • Tasks ranged from AutoCAD/Revit drafting, building code interpretation (for various jurisdictions), MEP design, field inspections, energy compliance modeling, team leading and project managing.

Inspector

• Apr 2010 - May 2011

• Inspect and identify structural defects in the storm sewer systems. • Repair defects and contain illicit discharges in the Municipal Separate Storm Sewer Systems (MS4) as required, following the preventive/predictive maintenance process. • Create a management plan in accordance with the National Pollutant Discharge Elimination System Regulations provided by the U.S. Environmental Protection Agency (EPA). • Inspect and identify structural defects in the storm sewer systems. • Repair defects and contain illicit discharges in the Municipal Separate Storm Sewer Systems (MS4) as required, following the preventive/predictive maintenance process. • Create a management plan in accordance with the National Pollutant Discharge Elimination System Regulations provided by the U.S. Environmental Protection Agency (EPA).