Experience

Huls Transmission Sdn Bhd

• Construction
• 1 - 100 Employee

• Health And Safety Officer

  • Apr 2014 - Present

  Project Advance Work for LRT3 Bandar Utama - Johan Setia: Design and Build of Installation, Testing and Commissioning Of TNB Overhead Transmission Line Relocation Work AW01. Project Mass Rapid Transit (MRT Line 2 - SSP) - Advance Work – Design and Build of Installation, Testing and Commissioning Of TNB Overhead Transmission Line Relocation Package AW202 Relocation of TNB Overhead Transmission Line (NNKSB Interchange) West Coast Expressway, IJM Section 3,4 & 5, Bukit Raja, Klang TNB (T) 88/2014 - Proposed 132kV Double Circuit Loop In / Out Into PMU Kajang Estate from Semenyih - Kajang Transmission Line TNB (T) 51/2014 - Installation of Single Circuit Lilo 275kV Transmission Line Kenyir – Tanah Merah Into PMU Hulu Terengganu TNB (T) 449/2013 – Proposed of LILO 275kV Double Circuit from Prai GIS – Bkt. Tambun into PMU NPRAI GIS TNB (T) 511/2013 - Proposed 132kV Single Loop In/Out 132kV Ohl Sg. Mati – Merlimau into PMU Sg.Rambai Show less



Tuah Nusa Sdn Bhd

• Meru, Klang Selangor

• HSE Executive

  • Jun 2013 - Apr 2014

  To advice, communicate all information on local OHS issues to all level. • Assist in the application of OHS procedures • Document control for HSE manual according to OHSAS 18001 • Review the OHSMS based on legal and customer requirement • Help to manage risks and hazards in their area To advice, communicate all information on local OHS issues to all level. • Assist in the application of OHS procedures • Document control for HSE manual according to OHSAS 18001 • Review the OHSMS based on legal and customer requirement • Help to manage risks and hazards in their area



PANTECH STEEL INDUSTRIES SDN.BHD

• 1 - 100 Employee

• Quality Control Engineer

  • Jun 2011 - Jun 2013

  Responsible for product quality improvement, NCR issues and corrective plan. Responsible for all inspection activities to ensure all product meet ASTM/ASME and customer specification or others related standard furthermore minimizing defect levels through process and quality improvement. Responsible for Inspection Testing such as Mechanical Testing, positive material testing, Hardness, and Impact Test. Attended ISO 9001: 2000 awareness course, internal audit programmed course. Responsible for product quality improvement, NCR issues and corrective plan. Responsible for all inspection activities to ensure all product meet ASTM/ASME and customer specification or others related standard furthermore minimizing defect levels through process and quality improvement. Responsible for Inspection Testing such as Mechanical Testing, positive material testing, Hardness, and Impact Test. Attended ISO 9001: 2000 awareness course, internal audit programmed course.