Ernest Murphy
Electrical Technician ll at Andrews Cooper- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
Topline Score
Bio
Fidel Delgado
To Whom It May Concern: I have worked with Ernest Murphy on three Electrical and Control engineering projects. In two of them he was the electrical/electronic technician in charge of wiring, testing and commissioning of panels, servo drives, sensors, scanners and tooling stations that were being built at ATS (Automation Tooling Systems) for Hewlett Packard and B-Braun. These tools consisted of several electrical/electronic panels and machine centers with multiple stations and conveyors. I recognize Ernest’s diligence and quality of work. He did a thorough controls testing of all PLCs inputs/outputs before handing in the tools for commissioning to me, the systems integrator. His task was completed ahead of schedule and he was always ready to provide me with the support I needed. On the third job, he worked at ICE Corporation as an Engineering Technician I directly under my supervision. This job consisted of an electrical and controls wiring tracing and labeling of a Government facility. This was a different type of work than he was used to but he adapted to it very quickly. He again demonstrated and applied his knowledge to successfully complete the project. Ernest is very meticulous with his work. He is an honest, sincere and responsible person that I can rely on. For all the above, I would not hesitate to hire Ernest on another project or hesitate to recommend him to any company that needs an excellent electrical/electronic technician. Sincerely, Fidel Delgado, P.E. President/ Senior Electrical and Controls Engineer ICE Corporation Office Tel/Fax: (541) 929 5997 Mobile: (541) 913 3891 E-mail: fideldc@icecorporation.net
Pieter Darter
Ernest is a motivated employee with the desire to do the job right. I worked with Ernest on a number of projects and I could always count on him to get the job done and right the first time. I highly recommend Ernest; he was an asset. On every project he worked on Electrical or mechanical
Fidel Delgado
To Whom It May Concern: I have worked with Ernest Murphy on three Electrical and Control engineering projects. In two of them he was the electrical/electronic technician in charge of wiring, testing and commissioning of panels, servo drives, sensors, scanners and tooling stations that were being built at ATS (Automation Tooling Systems) for Hewlett Packard and B-Braun. These tools consisted of several electrical/electronic panels and machine centers with multiple stations and conveyors. I recognize Ernest’s diligence and quality of work. He did a thorough controls testing of all PLCs inputs/outputs before handing in the tools for commissioning to me, the systems integrator. His task was completed ahead of schedule and he was always ready to provide me with the support I needed. On the third job, he worked at ICE Corporation as an Engineering Technician I directly under my supervision. This job consisted of an electrical and controls wiring tracing and labeling of a Government facility. This was a different type of work than he was used to but he adapted to it very quickly. He again demonstrated and applied his knowledge to successfully complete the project. Ernest is very meticulous with his work. He is an honest, sincere and responsible person that I can rely on. For all the above, I would not hesitate to hire Ernest on another project or hesitate to recommend him to any company that needs an excellent electrical/electronic technician. Sincerely, Fidel Delgado, P.E. President/ Senior Electrical and Controls Engineer ICE Corporation Office Tel/Fax: (541) 929 5997 Mobile: (541) 913 3891 E-mail: fideldc@icecorporation.net
Pieter Darter
Ernest is a motivated employee with the desire to do the job right. I worked with Ernest on a number of projects and I could always count on him to get the job done and right the first time. I highly recommend Ernest; he was an asset. On every project he worked on Electrical or mechanical
Fidel Delgado
To Whom It May Concern: I have worked with Ernest Murphy on three Electrical and Control engineering projects. In two of them he was the electrical/electronic technician in charge of wiring, testing and commissioning of panels, servo drives, sensors, scanners and tooling stations that were being built at ATS (Automation Tooling Systems) for Hewlett Packard and B-Braun. These tools consisted of several electrical/electronic panels and machine centers with multiple stations and conveyors. I recognize Ernest’s diligence and quality of work. He did a thorough controls testing of all PLCs inputs/outputs before handing in the tools for commissioning to me, the systems integrator. His task was completed ahead of schedule and he was always ready to provide me with the support I needed. On the third job, he worked at ICE Corporation as an Engineering Technician I directly under my supervision. This job consisted of an electrical and controls wiring tracing and labeling of a Government facility. This was a different type of work than he was used to but he adapted to it very quickly. He again demonstrated and applied his knowledge to successfully complete the project. Ernest is very meticulous with his work. He is an honest, sincere and responsible person that I can rely on. For all the above, I would not hesitate to hire Ernest on another project or hesitate to recommend him to any company that needs an excellent electrical/electronic technician. Sincerely, Fidel Delgado, P.E. President/ Senior Electrical and Controls Engineer ICE Corporation Office Tel/Fax: (541) 929 5997 Mobile: (541) 913 3891 E-mail: fideldc@icecorporation.net
Pieter Darter
Ernest is a motivated employee with the desire to do the job right. I worked with Ernest on a number of projects and I could always count on him to get the job done and right the first time. I highly recommend Ernest; he was an asset. On every project he worked on Electrical or mechanical
Fidel Delgado
To Whom It May Concern: I have worked with Ernest Murphy on three Electrical and Control engineering projects. In two of them he was the electrical/electronic technician in charge of wiring, testing and commissioning of panels, servo drives, sensors, scanners and tooling stations that were being built at ATS (Automation Tooling Systems) for Hewlett Packard and B-Braun. These tools consisted of several electrical/electronic panels and machine centers with multiple stations and conveyors. I recognize Ernest’s diligence and quality of work. He did a thorough controls testing of all PLCs inputs/outputs before handing in the tools for commissioning to me, the systems integrator. His task was completed ahead of schedule and he was always ready to provide me with the support I needed. On the third job, he worked at ICE Corporation as an Engineering Technician I directly under my supervision. This job consisted of an electrical and controls wiring tracing and labeling of a Government facility. This was a different type of work than he was used to but he adapted to it very quickly. He again demonstrated and applied his knowledge to successfully complete the project. Ernest is very meticulous with his work. He is an honest, sincere and responsible person that I can rely on. For all the above, I would not hesitate to hire Ernest on another project or hesitate to recommend him to any company that needs an excellent electrical/electronic technician. Sincerely, Fidel Delgado, P.E. President/ Senior Electrical and Controls Engineer ICE Corporation Office Tel/Fax: (541) 929 5997 Mobile: (541) 913 3891 E-mail: fideldc@icecorporation.net
Pieter Darter
Ernest is a motivated employee with the desire to do the job right. I worked with Ernest on a number of projects and I could always count on him to get the job done and right the first time. I highly recommend Ernest; he was an asset. On every project he worked on Electrical or mechanical
Experience
-
Andrews Cooper
-
United States
-
Engineering Services
-
100 - 200 Employee
-
Electrical Technician ll
-
Apr 2017 - Present
-
-
-
MEI Wet Bench Manufacturing
-
Millersburg
-
Elecrical Integrator
-
Jan 2015 - Jan 2016
I worked with a small company who are devoted to making quality products. My contribution was to wiring panels and integrating the tools together for testing. The challenge was to timely wire panels, integrate those panels within the modules, and the modules to separate modules tying them together electrically and aesthetically in Millersburg Oregon. I worked with a small company who are devoted to making quality products. My contribution was to wiring panels and integrating the tools together for testing. The challenge was to timely wire panels, integrate those panels within the modules, and the modules to separate modules tying them together electrically and aesthetically in Millersburg Oregon.
-
-
-
BC Forward @Hewlett Packard Corvallis
-
Corvallis, Oregon Area
-
Maintenence Technician
-
Jan 2013 - Jun 2014
Maintaining 30, one up, close tolerance automated tools for prototype final assembly. designed a metering injector to validate pen flush heated vac dryer. Maintaining 30, one up, close tolerance automated tools for prototype final assembly. designed a metering injector to validate pen flush heated vac dryer.
-
-
-
Concept Systems Inc
-
United States
-
Automation Machinery Manufacturing
-
1 - 100 Employee
-
Electrical Assembly Technician
-
Oct 2012 - Dec 2012
Express employment professionals, Electrical Assembly Technician, to Concept systems, Panel builder, Express employment professionals, Electrical Assembly Technician, to Concept systems, Panel builder,
-
-
-
DWFritz Automation
-
United States
-
Automation Machinery Manufacturing
-
100 - 200 Employee
-
Electrical assembly technician
-
Jul 2011 - Sep 2012
Follow previous layout plans, install components wire, and integrate the panels to automated hardware. Follow previous layout plans, install components wire, and integrate the panels to automated hardware.
-
-
-
-
ENGINEERING TECHNICIAN 1
-
Oct 2009 - Nov 2009
Fidel Delgado PE. 541-9295997; Validating wiring to electrical prints, for integration. Fidel Delgado PE. 541-9295997; Validating wiring to electrical prints, for integration.
-
-
-
-
Electrical Automation Technologist
-
Sep 2003 - Apr 2009
Following ladder logic Blue prints for electrical panel builds. Installing components to the back panel. Wiring up the safety plc, process plc, to those components. Working with Software to integrate the system to the customer s specifications. Electrical side of a tool builder. Some mechanical modifications were required. Follow engineering design. Trouble-shooting and problem solving, organize components and help to achieve customer dead line to test and ship. Following ladder logic Blue prints for electrical panel builds. Installing components to the back panel. Wiring up the safety plc, process plc, to those components. Working with Software to integrate the system to the customer s specifications. Electrical side of a tool builder. Some mechanical modifications were required. Follow engineering design. Trouble-shooting and problem solving, organize components and help to achieve customer dead line to test and ship.
-
-
-
ATS Systems
-
United States
-
Industrial Automation
-
1 - 100 Employee
-
Electrical Lead
-
Jun 2003 - Apr 2009
Responsibilities included receiving and kitting parts for assemblies, Laying out and mounting hardware to enclosure back panels, Drilling Taping, mounting brackets, installing OEM equipment routing cabling from the components to the logic controllers. Installing sensors and setting limits for the sensors and testing them. ground bonding, Integrating the equipment to other assembly's. Testing. Assisting software in integration in fit form and function. Responsibilities included receiving and kitting parts for assemblies, Laying out and mounting hardware to enclosure back panels, Drilling Taping, mounting brackets, installing OEM equipment routing cabling from the components to the logic controllers. Installing sensors and setting limits for the sensors and testing them. ground bonding, Integrating the equipment to other assembly's. Testing. Assisting software in integration in fit form and function.
-
-
-
-
PROCESS OPERATOR
-
Nov 2000 - Mar 2003
The duties were the same as performed when employed by Hewlett Packard. I went back to the very job I had without the HP benefits. The duties were the same as performed when employed by Hewlett Packard. I went back to the very job I had without the HP benefits.
-
-
-
-
ELECTRICAL TECH
-
Jan 1999 - Sep 1999
Job shop Electrical Technician, replateing silver contacts. Plating copper to aluminum and silver to the copper plate. Updating 1600 amp switchgear. Job shop Electrical Technician, replateing silver contacts. Plating copper to aluminum and silver to the copper plate. Updating 1600 amp switchgear.
-
-
-
-
Process Operator
-
Apr 1990 - Jan 1999
1st responder to a fast paced automated assembly line, designed to build Ink Jet Cartridges. The cycle time was sub second. downtime costs were $11.00 per second. I also working in the service dept. working on the Think Jet Quiet Jet products, as well as the P3 Printer and the P2 Fuser upgrade Program. 1st responder to a fast paced automated assembly line, designed to build Ink Jet Cartridges. The cycle time was sub second. downtime costs were $11.00 per second. I also working in the service dept. working on the Think Jet Quiet Jet products, as well as the P3 Printer and the P2 Fuser upgrade Program.
-
-
-
-
Process Operator
-
Mar 1990 - Jan 1999
Research And Development of the Thermal Ink Jet Technologies. Process operator Trouble shooter problem solver on a fast paced automated assembly line. Also a Printer technician on the Ink Jet and Laser Jet printer products. Research And Development of the Thermal Ink Jet Technologies. Process operator Trouble shooter problem solver on a fast paced automated assembly line. Also a Printer technician on the Ink Jet and Laser Jet printer products.
-
-
-
-
SERVICE REPAIR APPLIANCEOwner operator
-
Jun 1986 - Oct 1990
Home Appliance Service and Repair Phone diagnosis and self help to DIY repair of home appliance. Bought and sold used appliances, rebuilt repaired and recycled used appliances. Washers, Dryers, Refrigerators and Stoves. Home Appliance Service and Repair Phone diagnosis and self help to DIY repair of home appliance. Bought and sold used appliances, rebuilt repaired and recycled used appliances. Washers, Dryers, Refrigerators and Stoves.
-
-
-
-
INSPECTOR/FINISHER
-
Jul 1989 - Oct 1989
Grinding metal castings Grinding metal castings
-
-
-
MILL SUPPLY CORP
-
Jackson Street Albany
-
Laborer : POWER TRANS,CNVR BELTING,P.O.G.S.,BELT LACING
-
Nov 1987 - Sep 1988
POWER TRANS,CNVR BELTING,P.O.G.S.,BELT LACING Vulcanize endless conveyor belting, Lag pulleys, Make Orings. Cut Gaskets, and make sleeves. POWER TRANS,CNVR BELTING,P.O.G.S.,BELT LACING Vulcanize endless conveyor belting, Lag pulleys, Make Orings. Cut Gaskets, and make sleeves.
-
-
-
Koon Hall Testing
-
Old Salem Road Albany
-
Destructive Metallurgy Technician
-
Nov 1987 - Sep 1988
Broke charpys, bent weldments, elevated temp tinsile cold tinsile, Fatigue testing, Strip chart recording data collecting. ASTM standards were adheard to. Broke charpys, bent weldments, elevated temp tinsile cold tinsile, Fatigue testing, Strip chart recording data collecting. ASTM standards were adheard to.
-
-
-
-
Metallurgy Student Associate of Science
-
Sep 1983 - Dec 1986
Student Student
-
-
Education
-
1983 - 1986
Linn Benton Com Col
Associates of Science Degree, Metallurgy -
1983 - 1986
Linn Benton Comunity College
Associate of Science, Metallurgy
Community
