Lead Engineer

• Jan 2023 - Present

I am not allowed to share that much, but it's innovative and my functions are diverse. I am not allowed to share that much, but it's innovative and my functions are diverse.

Sr Developer

• Apr 2020 - Present

Webdesigns and product development for the automotive industry. Webdesigns and product development for the automotive industry.

Sr Value Engineer

• Sep 2020 - Present

Owner

• Sep 2008 - Present

Started TDO in 2008 after 1 year of being employee at a secondment agency being placed at an engineering's company. Used to work independently and flexible in a group is convenient when working at companies for short period's. Learning quickly and have a broad interest, is what makes the diversity of projects not a problem and so much fun to work on. As an all round engineer I was active in: -the secondairy sectors such as construct in the off shore and manufacturing in the agriculture. -the tertiary sectors such as medicine an food sectors. -the quarternary sectors such as development in the oil industry and designing in the food and yachts sector. Show less

Lead Project Engineer

• Apr 2021 - Jan 2023

Senior Product Developer

• Feb 2022 - Jun 2022

Mechanical Engineer

• Feb 2021 - Jan 2022

Construction Designer

• Apr 2020 - May 2021

Sr Product Engineer

• Apr 2018 - Mar 2020

Senior Engineer

• Apr 2016 - Apr 2018

Product Developer

• May 2014 - Apr 2016

Working on several projects with the sustaining product development department. Doing research for some compliance issues and examining some technical difficulties and working on improving these. 1st project was about the rear wheel joints of the Buffalo and Donkey. 2nd project about creating an overview in stability testing to predict the outcome of a few norm changes. 3rd project was about improving the slider end stop. The project I am now working has a much wider scope. I need to do material studies, strength tests and FEM calculations, cooperate with several teams and align the timelines, also close contact with the supplier and the mould engineers in Xiamen is very nice. Show less

Senior Engineer

• Feb 2014 - May 2014

Worked as an engineer for Bravilor Bonamat before and after a few successful projects here I was asked to help and work as a Senior Engineer with help on the side if needed. This project needed a strong and complete plan to get it over the finish line. Quotations, planning, and a lot of documentation was needed to support the engineering that looked like it was almost finished. Worked as an engineer for Bravilor Bonamat before and after a few successful projects here I was asked to help and work as a Senior Engineer with help on the side if needed. This project needed a strong and complete plan to get it over the finish line. Quotations, planning, and a lot of documentation was needed to support the engineering that looked like it was almost finished.

Medior Engineer

• May 2013 - Jan 2014

With my experience from coffee machines at Bravilor Bonamat I was able to help in a lot of electronic and programming projects that needed to be build in these coffee machines. My main functions were assisting and consulting in the wishes and demands of Bravilor Bonamat, help with testing software and that the hardware was build in all on time. With my experience from coffee machines at Bravilor Bonamat I was able to help in a lot of electronic and programming projects that needed to be build in these coffee machines. My main functions were assisting and consulting in the wishes and demands of Bravilor Bonamat, help with testing software and that the hardware was build in all on time.

3D Designer

• Mar 2011 - May 2011

Helping a colleague freelancer with adjusting and scaling the multisport helmet. Helping a colleague freelancer with adjusting and scaling the multisport helmet.

Junior Engineer

• Jun 2010 - Apr 2011

Work as an engineer through Hörchner and Hammersma. Working on a luxurious yacht for most of the time on a retractable helipad. Work as an engineer through Hörchner and Hammersma. Working on a luxurious yacht for most of the time on a retractable helipad.

Junior Engineer / Designer

• 2011 - 2011

As a freelancer I worked on several production and processing machines. When I was more familiar with these machines I made a few factory lay outs as well. As a freelancer I worked on several production and processing machines. When I was more familiar with these machines I made a few factory lay outs as well.

Designer

• Jan 2010 - Jun 2010

Work on a new kind off billboards and advertisement materials. Work on a new kind off billboards and advertisement materials.

Junior Engineer

• May 2009 - Jun 2010

Junior engineer on several projects, mostly Table Top (shake project). Junior engineer on several projects, mostly Table Top (shake project).

Engineer / Consultant

• 2009 - 2009

Detached by Post en dekker, I worked as a consultant and an engineer while implementing a complete project. Detached by Post en dekker, I worked as a consultant and an engineer while implementing a complete project.

Engineer

• 2008 - 2009

Worked on several projects as a freelance engineer and also helped with implementing software and data at Stork. Worked on several projects as a freelance engineer and also helped with implementing software and data at Stork.

Junior Engineer

• Jan 2008 - Sep 2008

Working on several projects detached by H&H. Several machines that all are build to check oil pipes on cracks and/or rusty spots. Working on several projects detached by H&H. Several machines that all are build to check oil pipes on cracks and/or rusty spots.

Junior Engineer

• Sep 2007 - Sep 2008

Work as a junior engineer on several projects mostly detached on locations of customers. Work as a junior engineer on several projects mostly detached on locations of customers.

Employee

• Sep 2007 - Sep 2008

Being detached at Hörchner & Hammersma. Being detached at Hörchner & Hammersma.

Junior Engineer

• Oct 2007 - Jan 2008

Detached on a project at Colpitt through Hörchner & Hammersma. Detached on a project at Colpitt through Hörchner & Hammersma.

Engineer/ Student

• Feb 2007 - Jun 2007

Design a test machine for testing the hydraulic and electric Rolls Royce parts. Design a test machine for testing the hydraulic and electric Rolls Royce parts.

Logistics Operator & Designer

• 2005 - 2007

Mobile Stage is a large truck combination which was engineered at West End and where I helped finishing it and placed every little detail in CAD. The truck itself was a challenge that I really liked to put in 3D and took me about 250 hours. After this engineering Ron van der Prijt went to festivals to let this mobile stage do what is was made for: put up a stage in 30 minutes with the capacity for whole bands or even cars. The stage has lights and music to put up a fantastic display. My function was to see that this stage was put up in time and correctly. Technical problems and arrange specific additions where also in my job description. Show less

Temporary Administrative Assistant

• 2000 - 2007

When AAC had it's busiest moments I helped with the large amounts of paperwork. When AAC had it's busiest moments I helped with the large amounts of paperwork.

Stagiair

• 2005 - 2006

For the first time I was a 3D-CAD engineer. Helped in the factory and also with engineering. I was assigned to design and build an APFR (Automated People Foot Restraint) for ESTEC in Noordwijk and worked on a lot of other projects: Drum hoop mixer, golf platform, drop capsule for weightless testing and an airplane simulator for SIM. For the first time I was a 3D-CAD engineer. Helped in the factory and also with engineering. I was assigned to design and build an APFR (Automated People Foot Restraint) for ESTEC in Noordwijk and worked on a lot of other projects: Drum hoop mixer, golf platform, drop capsule for weightless testing and an airplane simulator for SIM.

Trainee

• 2004 - 2004

As a Trainee I was working with the mill and lathe machinery to have some experience with these production techniques. In the end I was working on my own and made a few projects for my own. One of these projects I have displayed on a wall at home. As a Trainee I was working with the mill and lathe machinery to have some experience with these production techniques. In the end I was working on my own and made a few projects for my own. One of these projects I have displayed on a wall at home.

Assigned student

• Sep 2001 - Mar 2002

Working on a project to build an automated delivery system of medicins within the building. Working on a project to build an automated delivery system of medicins within the building.