Claudiu BIC
Software Test Engineer at Pilatus Aircraft Ltd- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
-
English Capacité professionnelle complète
-
French Compétence professionnelle
-
Romanian Bilingue ou langue natale
-
German Compétence professionnelle limitée
Topline Score
Bio
Credentials
-
First Certificate in English
University of Cambridge -
ISTQB CTFL (Certified Tester Foundation Level)
ISTQB - International Software Testing Qualifications Board -
ECDL (European Computer Driving License)
ECDL / ICDL Certification
Experience
-
Pilatus Aircraft Ltd
-
Switzerland
-
Aviation and Aerospace Component Manufacturing
-
700 & Above Employee
-
Software Test Engineer
-
juin 2019 - - aujourd’hui
Working mainly for two projects (airplane models): PC-24 and PC-21.In my first 1.5 years I worked only on PC-24, while slowly transitioning to PC-21. There are twomain differences between these airplanes. PC-24 is using jet engine used for business and notonly, which can suit more passengers, while PC-21 is using a turboprop engine and is used formilitary training. On PC-24, code is mainly written in C language, Software Level is DAL-A(Design Assurance Level is A - catastrophic) and test scripts are all automated. The certified software quality tool used for code coverage analysis is LDRA tool suite. PC-21 code is written either in Ada, Perl or C. Safety Standards and testing is a bit different as this aircraft’s purpose is only military (DO-178C), so the safety criticality is not the same as in PC-24. Tests are either manual, either automated. In both projects I was and am taking care of implementing requirements in existing tests or creating new test cases and scenarios which will fully cover the Software Requirements Specification (SRS). The tool used is IBM rational Doors.I am also participating in helping new testers getting acquainted with the test environment,either if it’s on HOST (the simulated one), or TARGET (the actual rigs from our laboratory – thecomputer from aircraft).At the end of each build, we have a formal testing campaign which runs over a definite period oftime. In this interval we have to run tests with the rig quarantined (no changes are done to theaircraft computer – IMC (integrated mission computer).
-
-
-
Technical University of Cluj-Napoca
-
Romania
-
Information Technology & Services
-
1 - 100 Employee
-
PhD Student
-
oct. 2017 - - aujourd’hui
The PhD studies are a continuation of the masters: researching and developing algorithms for image denoising. So, the aim pursued in my doctoral thesis is the theoretical approach to the restoration and improvement of images and video sequences using non-local filters, collaborative filtering methods and artificial intelligence based denoising methods. All of them being in the mainstream of publications for the restoration, improvement or filtering of images.keywords: AI, NLM, BM3D, PDE, Neural Networks, Machine Learning, Algorithms, OpenCV and C++ in Visual Studio, Matlab, Python.https://www.researchgate.net/publication/347190114_Shape_and_Contrast_Adaptive_Non-local_Means_Filterhttps://www.researchgate.net/publication/338654567_An_improved_NLM_filter_with_increased_noise_robustness_and_adaptive_similarity_function
-
-
-
Amaris Consulting
-
Switzerland
-
IT Services and IT Consulting
-
700 & Above Employee
-
IT Consultant
-
oct. 2018 - mars 2019
I worked as a consultant for a client from Oerlikon in a railway project involving the safety relevant part of the system in SIL2 applications.The purpose is the creation of documents which describe the testing environment – the “Lab Qualification”, the test equipment specification and the test lab tool description. The second purpose is to make a Validation Report based on that and other documents received from the other teams. I worked as a consultant for a client from Oerlikon in a railway project involving the safety relevant part of the system in SIL2 applications.The purpose is the creation of documents which describe the testing environment – the “Lab Qualification”, the test equipment specification and the test lab tool description. The second purpose is to make a Validation Report based on that and other documents received from the other teams.
-
-
-
Accenture
-
Ireland
-
Business Consulting and Services
-
700 & Above Employee
-
Software Test Engineer (Railway Automation)
-
mai 2017 - sept. 2018
At this job I have the opportunity to work in an international project which involves developing control systems of modern subways, high-speed trains and fully automated driverless systems used worldwide in various applications. I interact with external customers and find solutions for complex technical issues together with a professional team, using modern technologies. Responsibilities: - analyzing business logic, software requirements, user stories and use cases - definition, implementation & maintenance of the testing strategy according to business requirements and software implementation strategy; - definition & implementation of test cases for the planned features; - automation of the test cases; - design, implementation & maintenance of the test environment to extend test automation - execution of test cases and analysis of the results, determining the root cause of failures - Qualifications Tags: embedded C/C++, Pearl, IBM clearcase, Agile/V-model
-
-
-
Continental
-
Germany
-
Motor Vehicle Manufacturing
-
700 & Above Employee
-
Test Engineer (AOI/AXI/SPI)
-
oct. 2015 - mai 2017
- Responsible for Optical Test Equipments used in Production Process of PCB's- Ensure correct functionality of Software (C, C++, C#) and hardware(electronics) equipments- Continuous improvement of test equipment performance (SW and HW)- Monitor the Test equipments for improving product quality and functionality- Create work instructions for Test equipments- Track spare parts stocks- Coordinate the technical personnel that use Test equipments- Preventive maintenance of SW and HW Test equipments- Organize and coordinate the analysis of nonconforming parts——————-on short: responsible of some machines in the line production. Those machines acquired images of freshly out-of-the-oven PCBs and returned the failures/defects in components placement, soldering etc. I had to monitor and pro-actively improve the detection algorithms.——————
-
-
-
Institut d'Optique Graduate School
-
France
-
Higher Education
-
1 - 100 Employee
-
Intern
-
mars 2015 - sept. 2015
During my second year of master in France, as 2nd semester, I was doing a 6-months internship in Palaiseau, France.Main purpose here was to develop and validate robust technical and fast high-resolution images of the retina to improve images intended for medical analysis. Also characterizing inter-picture differences in the focus and defocus blur.This workshop was open to the ANR project REVEAL (2013-2015, high resolution imaging of the retinal vessels in humans), driven by the hospital of the "Quinze Vingts" - Clinical Investigation Centre (CIC) with the following partners: Imagine Eyes, IOGS, Onera-DTIM, Onera-DOTA, ISEP, Telecom ParisTech).This project also aimed to validate new indicators of disease (microvascular biomarkers) measured from images of retinal vessels.These high resolution images were obtained by incorporating adaptive optics ophthalmoscope (AO).In this context, IOGS involved firstly studies on improving the correction by AO, and is further responsible for the task "Image Processing" working closely with Onera-DTIM - The French Aerospace Lab (Department of Information Processing and Modeling). ———————————-on short: took over a project started by a post-doc, tried to improve the algorithms in matlab so doctors could manipulate easier patient’s eyes images using a GUI and determine what diseases they have. ———————————-Tags: Matlab, Algorithms, Optics, Medical Imaging, Image denoising
-
-
-
Fujikura Europe Ltd
-
United Kingdom
-
Telecommunications
-
1 - 100 Employee
-
Product Test Engineer
-
févr. 2014 - août 2014
First job after getting the applied electronics engineer bachelor diploma.Main duties were the programming and preparation of the inspection programs for the electrical conductivity of each pin in the manufactured cable for different automotive clients, as well as the software for visual inspection of the fuse-boxes so they don’t burst into flames. First job after getting the applied electronics engineer bachelor diploma.Main duties were the programming and preparation of the inspection programs for the electrical conductivity of each pin in the manufactured cable for different automotive clients, as well as the software for visual inspection of the fuse-boxes so they don’t burst into flames.
-
-
-
-
Internship
-
juin 2012 - juin 2012
Intern student- Application of knowledge and skills acquired in college- Testing development boards- Diagnose and resolve problems encountered during testing- Acquiring new knowledge on all basic electronic circuits such as amplifiers,oscillators, filters and converters Intern student- Application of knowledge and skills acquired in college- Testing development boards- Diagnose and resolve problems encountered during testing- Acquiring new knowledge on all basic electronic circuits such as amplifiers,oscillators, filters and converters
-
-
-
Orange
-
France
-
Telecommunications
-
700 & Above Employee
-
Internship
-
juin 2011 - juin 2011
Intern student- Acquired new knowledge on telecommunications and GSM networks- I was part of the team of "monitoring and maintenance (BSS)" of Orange, and with the engineers we solved the failures by our travels/interventions on sites with network problems nor we made some network extensions. Intern student- Acquired new knowledge on telecommunications and GSM networks- I was part of the team of "monitoring and maintenance (BSS)" of Orange, and with the engineers we solved the failures by our travels/interventions on sites with network problems nor we made some network extensions.
-
-
-
University POLITEHNICA of Bucharest
-
Romania
-
Higher Education
-
700 & Above Employee
-
Internship
-
juin 2010 - juin 2010
Intern student- Acquiring new knowledge on the electronic packaging;- First R&D skills in electronics packaging. Intern student- Acquiring new knowledge on the electronic packaging;- First R&D skills in electronics packaging.
-
-
Education
-
Université Bordeaux I
Master's Degree, Image and signal processing -
Technical University of Cluj Napoca
Master’s Degree, Faculty of Electronics, Telecommunications and Information Technology, Signal and Image Processing -
“1 Decembrie 1918” University of Alba Iulia, Romania
Engineer's Degree, Faculty of Telecommunications and Applied Electronics