Experience

Cureton Midstream LLC

• United States
• Oil and Gas
• 1 - 100 Employee

• • Jun 2021 - Present

  Main responsibilities include:-ABB TotalFlow EFM programming, calibration, and maintenance.-AMI and AII O2, H2O, and H2S install, setup, and calibration. -Monthly gas sample pulls from 38 meter and process locations. -Meter skid installation, usually including solar, battery bank and box, and slam valve programming. -BLM and producer contract compliance verification and optimization. -Coordination and scheduling of meter calibrations with the BLM and our producers. -Communications setup, install, and troubleshooting. This includes both CDMA and radio. -Upkeep, maintenance, and housekeeping of meter buildings and skids. -7 day on-call rotation with I&E technician. Additional responsibilities include:-Standing by for plant operations in order to support one operator on shift. -Taking I&E call outs while on-call and assisting in any projects that may arise. -Standing by and taking call-outs for field operations while the company manages low headcounts as a result of Covid. -Readily available to assist with operations during poor weather or upsets. Show less

• • Sep 2020 - Jun 2021

  Training as an I&E tech in both plant and field settings. I am currently focused on meter calibration and troubleshooting with PCCU, orifice plate change outs, gas analysis samples, small scale solar array power supply set-up, PLC cabinet fuse navigation, heater fire eye change-outs and burn mixture manipulation. I am also on standby for any operations support that may be needed as plant operators shift from 2 men per shift to 1.

• • May 2019 - Sep 2020

  Responsibilities include that of a plant operator as well as additional administrative and organizational supervisory duties including but not limited to plant efficiency progression with other leads, ordering of chemicals and maintenance crews, continuous training and support for newer operators, minor conflict resolution, and assistance with managerial activities to help take load off Ops Director.

• • Dec 2018 - May 2019

  Responsible for all aspects of plant operation both in the field as well as on console. Brought in initial gas flow through plant while commissioning. Operating a 60MMSCFD Cryo plant. Responsible for operation of compressors, mol sieve dehydration,RSV/GSP cryo, condensate and NGL stabilization and piping, and all support systems within the plant. Regulation compliance and community interaction with the sorrounding Colorado community.

• • Oct 2018 - Dec 2018

  Responsible for construction, commissioning, and operation of all plant processes.Central Control Room board operation of liquid reception, compression, dehydration, CO2 treating, Cryo separation, off-spec liquid reception, NGL and residue gas sales, pigging, and heating units. Plant capable of 60Mm. Operation of small 12MmSCFD temporary plant while main unit is under construction. Temporary plant is completely manual with no control room/board and no automation. Plant is being run by local gauges and troubleshooting is based on BTU value and ethane recovery readings off our NGC as well as pressure and temp readings on local gauges. Show less



Canyon Midstream Partners

• United States
• Oil and Gas
• 1 - 100 Employee

• • Jan 2018 - Oct 2018

  Monitor and control all plant processes. Direction of team of outside operators to ensure all operations inside plant are conducted safely and correctly with efficiency. Scheduling of maintenance with roustabout crews and outside contractors. Receiving of off-spec NGL trucks for processing and sales. Daily reporting to plant manager and VP of operations on all plant conditions and upsets. Work with suppliers and customers to make sure product is on spec and volumes are correct.

• • Jun 2017 - Jan 2018

  Midstream sour gas processing facility operator. Working under direction of console operator to ensure efficient operation of the plant. Duties include operation of tank farm, multi stage compressors, condensate stabilization, cooling towers, amine contactors and regen plants, glycol contractors and regen plant, demethanizer and cryogenic separation, multi phase separators, hot oil heaters, filters and operation of valves and control panels. General housekeeping includes plant environmental upkeep with regard to spills and trash, extinguisher inspection, delmar inspection, amine titration, filter changes and degassing of vessels. Show less



Airgas

• Argentina
• Retail
• 1 - 100 Employee

• • May 2016 - Nov 2016

  Oversight of manifold operators to ensure all actions are performed according to DOT, CGA, FDA, OSHA, and internal regulations.Regular training of new and veteran employees emphasizing safety and personal accountability in every aspect of every task. Production reconciliation and input for inventory control exceeding 1000 products daily. Daily bulk product level reading and recording. Facility shutdown and post shift securement including separation of flammable and oxidizing gas to separate docks. Show less

• • Oct 2015 - May 2016

  Cryogenic Liquid Filler: (160-265 L) Responsible for filling of liquid oxygen, nitrogen, argon, and CO2 both industrial and medical as well as ultra high purity. Medical includes all associated paperwork, fill sequence and lot tag association and allocation, and Servomex 5200 O2 analyzer operation for purity assay.

• • Jun 2015 - Oct 2015

  Small Medical Oxygen Filler: Responsible for pre and post fill inspections of cylinders as well as appropriate allocation of cylinders for distribution. Also responsible for operation of high pressure medical oxygen manifold for filling of small medical oxygen cylinders. (6-24 cu. ft.)Responsible for filling of medical liquid oxygen vans (67-120 gallon) directly from bulk storage. This includes line and vessel venting as well as Servomex 5200 calibration and operation for determining the purity of oxygen. Assist in the safe and responsible operation of oxygen, nitrogen, helium, CO2, argon, and argon/CO2 mixture manifolds to fill orders for larger scale medical and industrial use. Other responsibilities include light maintenance on manifolds, pumps and lines. SAFECOR compliance. Forklift operation. Working knowledge of fluid-dynamics. Bulk storage evaluation for inventory control. Show less



Colorado Mountain College

• United States
• Higher Education
• 400 - 500 Employee

• Bio-fuels Work Study

  • Aug 2013 - Dec 2014

  Participated in volunteer work in Bio-fuels facility. Work included pipe fitting and cutting, instrumentation installation and calibration, HPLC and GC preparation and operation, operation of large machinery, and algae manufacturing lab assistant work. Lab work included precise measurement of compounds, creating and working in extremely sterile environments and operation of small scale vacuum pumps for air-free glovebox operation. Participated in volunteer work in Bio-fuels facility. Work included pipe fitting and cutting, instrumentation installation and calibration, HPLC and GC preparation and operation, operation of large machinery, and algae manufacturing lab assistant work. Lab work included precise measurement of compounds, creating and working in extremely sterile environments and operation of small scale vacuum pumps for air-free glovebox operation.