Experience

Babcock Power

• United States
• Oil and Gas
• 300 - 400 Employee

• Senior Project Designer

  • Jul 2022 - Present

  Cuyahoga Falls, Ohio, United States Design internal boiler and environmental components for existing power generation stations.

• Senior Project Designer

  • Jul 2022 - Present

  United States



FM Global Insurance

• Jurisdictional Consultant II

  • Oct 2019 - Jul 2022

  Cleveland, OH In my current role, I serve as an In-Service Boiler Inspector of boilers and pressure vessels, per jurisdictional requirements. I record and submit my results in Jurisdiction Online and the Pennsylvania Bureau of Occupational and Industrial Safety (BOIS) tools to obtain Commonwealth certifications as applicable or report violations identified during my inspections. ►During my tenure, I have earned a National Board In-Service Boiler Commission and the licenses to perform inspections in Ohio… Show more In my current role, I serve as an In-Service Boiler Inspector of boilers and pressure vessels, per jurisdictional requirements. I record and submit my results in Jurisdiction Online and the Pennsylvania Bureau of Occupational and Industrial Safety (BOIS) tools to obtain Commonwealth certifications as applicable or report violations identified during my inspections. ►During my tenure, I have earned a National Board In-Service Boiler Commission and the licenses to perform inspections in Ohio, Pennsylvania, West Virginia, New York, Michigan, and Kentucky. Show less



The Babcock & Wilcox Company

• Proposal Manager

  • Jun 2019 - Oct 2019

  Barberton, Ohio I managed customer component requests by collaborating across departments to write persuasive proposals and grow the company’s revenue. ►To accommodate a quick turnaround project, I collaborated with key interdepartmental stakeholders to produce a successful $1.7M proposal within ten days. ►I earned promotion into the Proposal Manager role based on my performance, project management and design experience, company knowledge, and strong customer relationships.



Babcock & Wilcox

• United States
• Renewable Energy Power Generation
• 700 & Above Employee

• Senior Tech Designer/ Scan Project Manager

  • Mar 2017 - Oct 2019

  Barberton, Ohio Heading and coordinating 3D scan-related projects, I partnered with the project management team to write effective requests for quote (RFQs) and acquire vendor quotes. I performed site walk-downs to gather information and drive timely project completion with minimal delays. I conducted vendor site tours, tracked deliverables to verify completion, and managed internal point cloud files. Employing deep design skills, I produced 3D models and 2D drawings in the SolidWorks application per… Show more Heading and coordinating 3D scan-related projects, I partnered with the project management team to write effective requests for quote (RFQs) and acquire vendor quotes. I performed site walk-downs to gather information and drive timely project completion with minimal delays. I conducted vendor site tours, tracked deliverables to verify completion, and managed internal point cloud files. Employing deep design skills, I produced 3D models and 2D drawings in the SolidWorks application per the customer’s specifications and engineering input, focusing on alignment with industry standards. ►To address the need to modernize data gathering and streamline our retrofit design processes, we had to eliminate our dependence on paper drawings and field measurements gathered through traditional means, especially for areas out of reach. I earned a Six Sigma Green Belt and presented a persuasive business case for implementing 3D imaging to obtain as-built conditions for retrofit designs. ►I earned the Scan Project Manager position and managed 3D imaging for multiple projects from quotes, accompanied sublet teams to job sites, monitored the deliverables process, and designed storage per the project plan. ►To drive consistency, I documented Best Practices for point cloud data usage and the Autodesk ReCap 360 application. Show less



The Babcock & Wilcox Company

• Field Service Coordinator

  • Sep 2014 - Mar 2017

  Barberton, Ohio, United States The Babcock & Wilcox Company, Barberton, OH, Field Service Coordinator (Sep 2014-Mar 2017) Collaborating with the design team and project managers, we successfully completed field projects. I composed Proposal Information Requests (PIRs) and liaised with the purchasing, engineering, and design teams to obtain estimates and ensure consistent field service contract progression. I supported effective project management by contacting internal colleagues and outside vendors to drive timely… Show more The Babcock & Wilcox Company, Barberton, OH, Field Service Coordinator (Sep 2014-Mar 2017) Collaborating with the design team and project managers, we successfully completed field projects. I composed Proposal Information Requests (PIRs) and liaised with the purchasing, engineering, and design teams to obtain estimates and ensure consistent field service contract progression. I supported effective project management by contacting internal colleagues and outside vendors to drive timely deliverable completion. I served as Safety Specialist for the field service team, responding to information requests within ~24 hours. ►In the Safety Specialist role, I achieved certification as a Competent Person for Inspection of Fall Safety Equipment to implement safety and fall protection practices. I conducted annual inspections of fall arrest and restraint equipment. ►Overseeing and supporting five field service offices, I conducted annual fall protection and safety inspections for all equipment and onsite personnel. I facilitated yearly safety training for all teams, traveling to annual team meetings to inspect personal protective equipment (PPE). Show less



Babcock & Wilcox

• United States
• Renewable Energy Power Generation
• 700 & Above Employee

• Technical Designer III

  • Mar 2006 - Sep 2014

  Barberton, OH My role included delivering 3D models with proposal drawings to the sales team for customer presentation to facilitate sales, frequently within the narrow timeline of one week. I multitasked and prioritized effectively to manage simultaneous projects. I conducted site walk-downs to gather field data, define solutions to customer issues, and identify performance improvement opportunities. To assist the proposal group, I visited sites and performed pre-bid walk-downs, liaising with… Show more My role included delivering 3D models with proposal drawings to the sales team for customer presentation to facilitate sales, frequently within the narrow timeline of one week. I multitasked and prioritized effectively to manage simultaneous projects. I conducted site walk-downs to gather field data, define solutions to customer issues, and identify performance improvement opportunities. To assist the proposal group, I visited sites and performed pre-bid walk-downs, liaising with customers and sales, construction, and field service teams. I partnered with engineers and proposal managers to tailor custom components for each customer. I researched original customer contracts in our product lifecycle management (PLM) tool, data warehouse, and microfiche to provide accurate boiler data to proposal managers. I trained four designers, two for the proposal group and two after leaving the position, on pressure parts and proposal group practices. To create cost-effective designs, I collaborated across functions and levels with the proposal, project management, engineering, technical design, manufacturing, and estimating teams. ►As part of a process improvement effort, I wrote the Service Projects Proposal Drawing Procedure. ►I developed a data recording method while onsite and submitted the detailed process in trip report format. ►I earned the Outstanding Perseverance Award in August 2013. Show less



Newport News Shipbuilding, A Division of HII

• United States
• Defense and Space Manufacturing
• 700 & Above Employee

• Designer II

  • Jun 2001 - Mar 2006

  4 years experience as a piping systems designer; One year experience designing mechanical assemblies using AutoCAD and Inventor design software.