1st Engineer (Heavy Lifting Vessel DP3, 4000T Crane) at Green Jade

• Jun 2023 - Present

1st Engineer Heavy Lifting Vessel (2500T Crane) 8 points mooring anchors Seaway Yudin

• Dec 2022 - Jul 2023

Floating maintenance

1st Engineer (Ship crane Heavy lifting) Seaway yudin

• May 2022 - Jul 2023

Installation legs of wind turbine

1st Engineer (Ship crane Heavy lifting) seaway yudin

• Nov 2021 - Jul 2023

Floating repairs at shipyard pax ocean Batam Indonesia

1st Engineer FPSO MPF3

• Mar 2022 - Apr 2022

Preservation new vessel Preservation new vessel

1st Engineer FPSO prosperity

• Sep 2020 - Nov 2021

Chief Engineer AHTS-DP2 (GO Perseus)

• Jun 2018 - Aug 2018

Chief Engineer AHTS-DP2 (GO Phoenix)

• Apr 2018 - Jun 2018

Chief Engineer AHTS-DP2 (SK LINE 79)

• Mar 2017 - Aug 2017

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12. Supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc. Show less

Chief Engineer Accomd Work boat (4 point mooring) Perdana sovereign

• Jan 2017 - Mar 2017

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc. Show less

Chief Engineer AWB (8 point) Perdana Emerald

• Jul 2016 - Oct 2016

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc. Show less

Chief Engineer AWB(8 points mooring winch)Perdana Emerald

• Mar 2016 - May 2016

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc....... Show less

Chief Engineer AWB (8 Points mooring Winch Anchor) Perdana Emerald

• Nov 2015 - Feb 2016

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc....... Show less

Chief Engineer AWB (8point mooring winch plimsoll) Perdana Emerald

• Jun 2015 - Sep 2015

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc....... Show less

Chief Engineer AWB (8point mooring Plimsoll) Perdana Emerald

• Jan 2015 - Apr 2015

Chief engineer (AWB 8 point mooring Plimsoll) Perdana Emerald

• Sep 2014 - Dec 2014

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct Auxiliaries engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc....... Show less

Chief engineer ( Accomd work boat 6point amhoist) MV.Posh Bali

• Jan 2014 - May 2014

Chief engineer must be responsible related performance all equipment and machinery Chief engineer has to be a parts assistance and update the vessel daily reports, all detective parts and made the planning maintenance to the vessel etc. Chief engineer should be expert to all abnormality the system the vessel, chief engineer shall be reviewed company ism and policy. That's the points Chief engineer must be responsible related performance all equipment and machinery Chief engineer has to be a parts assistance and update the vessel daily reports, all detective parts and made the planning maintenance to the vessel etc. Chief engineer should be expert to all abnormality the system the vessel, chief engineer shall be reviewed company ism and policy. That's the points

Chief engineer (Accomd work boat 4point Plimsoll ) MV.Ajang Hira

• Feb 2013 - Sep 2013

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc...... Show less

Chief engineer (Ahts) MV.Ajang Indah

• Sep 2012 - Dec 2012

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc...... Show less

Chief engineer ( Accomd work boat 4 point Plimsoll) MV.Ajang Hira

• Mar 2012 - Sep 2012

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantlyEtc.... Show less

Chief engineer (Ahts) MV.Ajang Indah

• Jan 2012 - Feb 2012

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instanly.Etc..... Show less

Chief engineer ( Ahts) MV.Ajang Indah

• Oct 2011 - Dec 2011

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc..... Show less

Chief engineer ( Accomd work boat 4 point Plimsoll) MV.Ajang Hira

• Mar 2011 - Aug 2011

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc...... Show less

Chief engineer (Accomd work boat 4 point Plimsoll) MV.Ajang Hira

• Jan 2011 - Feb 2011

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.14. In consultation with chief officer and 2nd en Show less

Chief engineer (Accomd work boat 4 point Plimsoll) MV.Ajang Hikmah

• Nov 2010 - Jan 2011

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instanlyEtc...... Show less

Chief engineer (Accomd work boat 4 point Plimsoll) MV.Ajang Hira

• Sep 2010 - Nov 2010

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc....... Show less

Chief engineer ( Accomd work boat 4 point Plimsoll) MV.Ajang Hira

• Apr 2010 - Jun 2010

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc...... Show less

Chief engineer (work barge boat 4 point Plimsoll) MV.Ajang Hikmah

• Feb 2010 - Apr 2010

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc..... Show less

Chief engineer ( work barge boat 4 point Plimsoll) MV.Ajang Hira

• Dec 2009 - Feb 2010

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc..... Show less

Chief engineer ( Fast crew Boat) MV. Ajang Dawah

• Aug 2009 - Nov 2009

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc....... Show less

Chief engineer (Fast crew Boat) MV. Ajang Dawah

• Mar 2009 - Jun 2009

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc..... Show less

Chief engineer ( Fast crew Boat) MV.Pelican Vision

• Aug 2008 - Dec 2008

The chief engineer has the following specific following responsibilities : 01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures. 02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance. 03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency. 04. Monitor and optimize of fuel consumption. 05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays. 07. Prepare a bunkering plan(including Lub oil)consultant with chief officer. 08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C 11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements. 12.supervise, control & verify the application and consumption of spare parts and stores. 13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly. Etc Show less

Chief engineer ( Fast crew Boat) MV. Pelican Vision

• Jan 2008 - May 2008

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc.... Show less

Chief engineer ( Fast crew Boat) MV.Pelican Vision

• Aug 2007 - Dec 2007

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc..... Show less

Chief engineer ( Fast crew Boat) MV. FOS Galaxy

• May 2007 - Jul 2007

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc.... Show less

Chief engineer ( Fast crew Boat) FOS Star

• Sep 2006 - May 2007

The chief engineer has the following specific following responsibilities :01. Ensure the safe & current running of the main engine, Auxiliaries Engine & all such primary and secondary equipment and system in accordance with manufacturers instructions & in keeping with company procedures.02. Understand the parameters to ensure efficient maintenance and operations engine plants, ie. Fuel efficiency & power analysis & system heat ballance.03. Ensure that the engine are correctly tuned to achieve maximum fuel efficiency.04. Monitor and optimize of fuel consumption.05. Conduct a main engine performance test at least once a month & results are logged in the performance system. 06. Understand the various ship handling & emergency factors with respects to the engine & rudders movements when the vessel is being maneuvers under controls & uncontrolled conditions. 06. Ensure that precautions are taken in order to avoid uncontrolled starting up of propulsion machinery port stays.07. Prepare a bunkering plan(including Lub oil)consultant with chief officer.08. Monitoring the bunker start-up and closing- down procedures whilst also providing all necessary anti pollution measures and remains back up during the complete bunkering operations. 09. Control the consumption of fuel and water in order that the master can ensure the vessel carries adequate stocks of fuel and water consistent with the owner requirements. 10. Ensure that fuel bunkering tanks isn't heated to a temperature higher than 55degree C11. Ensure the vessel carries adequatestocj of stores and spares and Lub oil with respects of maintenance and consistent and repair and consistent with owner requirements.12.supervise, control & verify the application and consumption of spare parts and stores.13. Ensure that the CO2 plants are secure against unintended release during inspection of the CO2 plants observed defects or deficiences shall be rectified instantly.Etc.... Show less

2nd engineer (Fast Crew Boat) MV.FOS star

• Jul 2006 - Aug 2006

2nd engineer (Fast Crew Boat) MV.Pelican Vision

• Mar 2006 - Jun 2006

2nd engineer (Fast Crew Boat) MV.Pelican glory

• Jan 2006 - Mar 2006

2nd engineer (Fast Crew Boat) MV.Pelican Challenge

• Nov 2005 - Jan 2006

3rd engineer ( Fast Crew Boat) MV.Pelican Vision

• May 2005 - Sep 2005

3rd engineer (Fast Crew Boat) MV.Pelican Vision

• Nov 2004 - Mar 2005

3rd engineer (AHT) MV. Juliet

• Oct 2003 - May 2004

3rd engineer (AHT) MV. Aurela

• Dec 2002 - Jun 2003

3rd engineer (Motor Tanker) MT. Best ll

• Mar 2002 - Sep 2002

Cadet ( General Cargo) MV.Makmur Perkasa

• Feb 2000 - Feb 2001