Experience

SIPAL Engineering Pvt Ltd

• Zimbabwe
• Mechanical Or Industrial Engineering
• 1 - 100 Employee

• Flight simulator maintenance technician

  • Jul 2021 - Present

  Responsible for scheduled and unscheduled maintenance on the Eurofighter flight simulator, Reiser cockpit with motion system and Rokwell Collins image projection, by setting parameters and aligning the projection beams on the dome through dedicated software, troubleshooting between the various data and image processing systems (ios,ckp,domain controller, etc.) and wiring of the various lines (fiber, power, data) between the devices interconnected with the aircraft. Inventory management and spare parts supply through CMOS management software. Full Eurofighter Electrical/Structural/Avionic aircraft course held at Caselle (TO) and additional training as IMSS console operator to assist pilots in-flight activities. Show less



Leonardo

• Belgium
• Construction
• 1 - 100 Employee

• • May 2020 - Apr 2021

  At the Venegono site I took care of the electrical cables for M-345 and M-346 aircraft.The wiring work took place with the reading of technical diagrams / MHL, followed by the drafting of various conductors in line with the wiring diagram; the next phase included the crimping of terminals and completion of connectors (fixed, flying, asu, coax, triax, ocito, etc.) according to military specifications; then ending with the test phase through DTMCO testing.From this experience I learned the technical differences between the various cabling, (power cables, shielded cabling, wiring for fuel sections, cables for radio transmissions, etc.) and was able to refine my technical skills for finishing connectors of any kind, both on the bench and directly on the aircraft. Show less

• • May 2018 - May 2020

  I worked as an aircraft electrical fitter on the wing body of the F-35 Lightning II at the military base Leonardo in Cameri, where I took part in a deatiled training course (by Leonardo) on the F-35 Lockheed Martin aircraft dealing with the electro-avionics, including: digital data transmission, equipment and functions, types of wiring, optical fiber, electromagnetic interference, stealth characteristics, etc. with final tests and qualification to operate in Assembly Line / FACO. I am also authorised to manufacture and install strain gauge electronic sensors, designed to analyse the level of stress in the most critical points of the aircraft structure. Previously I worked in the Wing section as a structural fitter, after passing the course dedicated to structural resources, some of the topics covered in detail were: electrical bonding, technical drawing, electrostatic charge / discharge , chemical film and touch-up, Sealing, Moldable plastic shim, mounting bulkhead fittings, fluorosilicone injection process etc. Finally I completed an advanced FOD course and with this obtained my certificate and gained the possibility to also operate in the flight line. Show less



ISATI Srl

• Italy
• Aviation and Aerospace Component Manufacturing
• 1 - 100 Employee

• Helicopter fitter AW189

  • May 2017 - Feb 2018

  I carried out a variety of tasks concerning the processing of the work sheets, containing technical drawings and electrical works to be performed, in addition to the fittings of the various type of cables (Class G, Class S, Coaxial etc.) in the different segments of the helicopter (nose- roof-floor- tail). Among the various electrical operations carried out, I performed the assembly of the TB with the attached bonding test and the final insulation with chemical sealant to prevent corrosion over time, disassembling and subsequent reassembly of connectors with wiring diagram, test connectors pin to pin, relay installation, TC installations, integration of cables in the mother wiring. I worked mainly on the helicopter AW 189 (variants: VIP, military and civil) at Leonardo Helicopters in the Vergiate (IT) plant. Show less



Security Sistem

• 1 - 100 Employee

• Installer of security and video surveillance systems

  • Jun 2016 - Mar 2017

  Here I worked in customer relations and the analysis of controlled environments (internal, external, civil and industrial housing). I subsequently worked to select the best radar and sensors for installation via cables or wifi. This included the drafting of wiring, installation of components and support for programming the alarm control panel. (Bentel, Tecnoalarm, Paradoc, Dahua). Here I worked in customer relations and the analysis of controlled environments (internal, external, civil and industrial housing). I subsequently worked to select the best radar and sensors for installation via cables or wifi. This included the drafting of wiring, installation of components and support for programming the alarm control panel. (Bentel, Tecnoalarm, Paradoc, Dahua).



Autonomo

• Retail
• 100 - 200 Employee

• Researcher and Developer

  • Jan 2015 - Apr 2016

  I developed the idea of an innovative project in the motorcycle world; a thermoregular integral protection helmet. The concept was first developed through wiring diagrams and technical drawings, which were then realized in the form of a working prototype for promotional purposes towards companies in the relevant sector. Everything has been correctly documented as a utility model at the Italian Patent and Trademark Office, which can be viewed with the following number: 202015000024851. On 17/05/2017 the Ministry of Economic Development, after analysing the project, issued the validation of the patent, attesting to the originality of the idea. The helmet is currently in production and made available to the public in America, by the Feherhelmets company. https://feherhelmets.com/ Show less



AgustaWestland

• Netherlands
• Business Consulting and Services

• Engineering methodist AW609

  • Jan 2014 - Nov 2014

  The processing and issuing of operational cycles, related to the development of electrical wiring for various Agusta helicopter lines (AW139-109-129-189-609 Experimental). My job was mainly based on the creation of drawings and technical data sheets based on MIL standards, whereby I described all the technical procedures, and I calculated the overall timing for completing the electrical wiring. After issuing the cycle, it was part of my job to support the operator. The processing and issuing of operational cycles, related to the development of electrical wiring for various Agusta helicopter lines (AW139-109-129-189-609 Experimental). My job was mainly based on the creation of drawings and technical data sheets based on MIL standards, whereby I described all the technical procedures, and I calculated the overall timing for completing the electrical wiring. After issuing the cycle, it was part of my job to support the operator.



F@M Group Srl

• Italy
• Business Consulting and Services
• 1 - 100 Employee

• Technician

  • Jun 2013 - Nov 2014

  Technical support for customers in the telecommunications sector and working to find the best technical/economic solution tailored the individual needs and subsequent care and maintenance of the final installation. Technical support for customers in the telecommunications sector and working to find the best technical/economic solution tailored the individual needs and subsequent care and maintenance of the final installation.



Govoni Mobili

• Italy
• Furniture
• 1 - 100 Employee

• CNC programming employee

  • Sep 2012 - May 2013

  CNC programmer (3D Morbidelli machine). Analysis and reporting of the dimensions from technical drawings, and subsequent creation of the program by setting the number of the various steps to be performed on the piece and the various tools to be used to achieve the finished product. CNC programmer (3D Morbidelli machine). Analysis and reporting of the dimensions from technical drawings, and subsequent creation of the program by setting the number of the various steps to be performed on the piece and the various tools to be used to achieve the finished product.



LEYBOLD OPTICS GMBH

• Technical Engineer

  • Aug 2011 - Jun 2012

  Worldwide technical assistance on Leybold optics machines that create a high pressure vacuum to carry out specific treatments on optical lenses, condenser films, food films and solar panels. Worldwide technical assistance on Leybold optics machines that create a high pressure vacuum to carry out specific treatments on optical lenses, condenser films, food films and solar panels.