Experience

MANCHE-CTCO Contracting

• Algeria
• Oil and Gas
• 1 - 100 Employee

• site manager pipeline

  • Aug 2020 - Present



JGC Algeria

• Algeria
• Oil and Gas
• 300 - 400 Employee

•  TESTPACKE COORDINATOR

  • Nov 2019 - Present

   TESTPACKE COORDINATOR JGC : PROJECT: HMD UP SIDE HASSI MOUASSOUD 16-SEPTEMBRE -  / ALGIER / - PETROWORKS-CPECC-SONTRACH  LINE CHECK  closed the punch list for item (QC/ING)  Review Test pack Check Sheets for completeness  TESTPACKE  Review Test pack Check Sheets for completeness.  Verification NDT reports (VT-PT-MT-PMI-HT-RT)  Pressure Testing performed as required and completed.  Verification of the Equipment’s hydro test (pump of filling pump of prevue; pressure recorder; temperature recorder pressure gage).  -verify the certificate of instrument and of Equipment’s hydro test (certificates of conformity of calibration).  -hydrostatic program for preparation  -verify the boucle in site and installed the group of work  -Hydrostatic Preparation (blowing, flushing, increases the pressure; Restatement PROJECT: HMD UP SIDE HASSI MOUASSOUD 16-SEPTEMBRE –17-03-2020 - / JGC / -SONTRACH Show less



China Petroleum Engineering & Construction Corporation (CPECC)

• Oil and Gas
• 700 & Above Employee

• PRPJECT MANAGER IN SITE OF CLEANING CHEMICAL

  • Jan 2019 - Present

  o Commissioning Department /SUBCONTRACTER PETROZORKS  HSE is the first thing.  Attend CPECC meetings for project progress.  Controls and ensures the quality of CLEANINC CHEMICAL.  Completed the anomalies to the project and find the solutions with CPECC  Estimate supplies at the store.  Follow and program the groups before the cleaning phase  verify test pack , marked up P&ID and ISO with the site "cleaning chemical"  Verify the battery limit of test-pack as per the scope of chemical  Attend the inspection of the chemical cleaning with the client CPECC and SONATRACH Show less



Tecnicas Reunidas

• Spain
• Engineering Services
• 700 & Above Employee

• Piping supervisor / NDT level II-tespack-

  • Dec 2017 - Present

   PREPARATION ENGINEERING TEST PACKE  verify test pack, marked up P&ID and ISO with weld map “Hydro-test-Pneumatic Test-Test Test-Service"  Verify the dispatching PID for hydro test (different: class , pressure ,fluid ,material , other seconder ..)  Verify the pressure test and pressure design and temperature as-per line list engineering.  WALK DOWN  Verify the line as-per isometric or as-per as-built  verify of alignment for all line  Verify the material of line (check the valves. .supports welded .fitting .instrument….)  Establish list of reserves , category A/B/C  DOCUMENT REVIEW  Qc piping , Fit-up ,welding ,NDE  Review Test pack Check Sheets for completeness.  Verification and follow-up all QC document for welding.  Verify all NDT/ PWHT clearance and coverage as per piping class. Verify the Isometric control sheet to be verified and reviewed by all parties prior to release for testing.  - Verify the NDT percentage (PT-MT-PMI-HT-RT.PWHT) as-per WPS.  -Verification NDT reports (VT-PT-MT-PMI-HT-RT-PWHT-FT) as per isometric and data base  - Preparation the NDT summary and verify (line, fluid, number joints, diameter, schedule, heat number, WPS, number reports, NDT %).  QA/QC HYDROSTATIC  Pressure Testing performed as required and completed.  Check & review preparation of Test-Pack.  Verify documents of test pack  Verify limit of test  Verification of material removed (valves automatic, check valve, instrument, strainer…)  Verify provisions for venting/drain  Piping pre-cleaning before testing.(Air blowing)  Verify the pressure gauges, pressure and temperature chart recorders & testing manifolds hydro testing (calibration certificate)  Post-test line cleaning activities and verify drying & draining of piping system  Verification of Flange bolts Tightening / Torqueing / Tensioning.  Hydro test witness with client o PROJECT: CPF OUED ZINE- DECEMBER2017 - UNTIL TO DATE / ADRAR / - TECNICAS RENIDASS -GTG- Show less



LEAD/petrofac/GRN

• Algérie/adrar-REGAN-

• QA/QC mechanical Engineer +NDT level II -service testpacke-

  • Nov 2016 - Nov 2017

  Mechanical Piping Engineer –(QA/QC)  PREPARATION ENGINEERING TEST PACKE  verify test pack , marked up P&ID and ISO with weld map "Hydro-test-Pneumatic Test-Test Test-Service"  Verify the battery limit of test-pack  verify Piping Material class  Verify the pressure test and pressure design and temperature as-per line list engineering. COORDINATOR TESTPACK  DOCUMENT REVIEW  Visual inspection of welding members and structure as per code requirement  Inspection of joint fit-up ,diameter , schedule ,root gap , internal misalignment, rotation  Preparation of daily report every day.  Review Test pack Check Sheets for completeness.  Verify all NDT/ PWHT clearance and coverage as per piping class. Verify the Isometric control sheet to be verified and reviewed by all parties prior to release for testing.  Verify the NDT percentage (PT-MT-PMI-HT-RT.PWHT) as-per WPS.  Verification NDT reports (VT-PT-MT-PMI-HT-RT-PWHT-FT) as per isometric and data base  Preparation the NDT summary and verify (line, fluid, number joints, diameter, schedule, heat number, WPS, number reports, NDT %). PROJECT: CPF REGGANE / ADRAR / - Petrofac -GRN- o LEAD COMPANY -contracting and trading Ltd-November2016 - November 2017-Petrofac Show less



ENGCB/TRC-SONATRACH

• Algeria area/pipeline illizi

• Senior Mechanical Engineer / Interim Project Manager

  • Sep 2014 - 2016

   Technical Department : GCB / DTC (DIRECTION DES TRAVEAUX CANALISATION) Mechanical Engineer-Piping N2 / Pipeline: • Preparation of pipeline projects (Illizi -Djanet 10 ") / (Tidikelt -Tamanrasset 16"): • Quality control plant / PCQ, procedure management project / PMP. • Estimate the materials for the test. • Preparation of technical sheets of all instruments and Project equipment • Planning of both projects. Pipeline projects (Illizi -Djanet 10 ") -231k m Project responsibility • Mechanical engineer in the technical service of the project. • Principal Mechanical Engineer N3- responsible Quality - • Technical Service responsible • Acting Project Manager.  HSE is the first thing.  Attend SONATRACH meetings for project progress.  Controls and ensures the quality of welding.  Completed the anomalies to the project and find the solutions with sonatrach  -Estimate supplies at the store.  Follow up and program the groups following the project phase.  Update project work plan for progress.  Monitoring the progress of work.  Follow up and check the logistic equipment according to the reports of chief material (diesel refill part maintenance...)-  Follow up and install the program of camp GCB/DTC (DIRECTION DES TRAVEAUX CANALISATION) FILLIEL SONATRACH-2013-2016-SONATRACH- TRC- Show less



SOSCITE LEAD

• Algeria area-hassi masouaad

• PIPING ENGINEERING

  • Apr 2010 - Aug 2013

   PREPARATION ENGINEERING TEST PACKE  verify test pack ,marked up P&ID and ISO with weld map "Hydro-test-Pneumatic Test-Test Test-Service"  Verify the battery limit of test pack  verify Piping Material class  Verify the pressure test and pressure design and temperature as-per line liste engineering. o Responsible Construction –  Mechanical Completion  Hydraulic bolt tightening torque.  Close the items of Equipment-punch list-  Close the items of piping-punch list-  Insulation (cold lime insulation, personal protection, paint)  -Commissioning ( general verification of sub-systeme and systeme) o COMPANY LEAD-contracting and trading-Nevombre 2010 Ltd - août 2013-Saipem o PROJECT LPG-LDHP(Liquefied petroleum gas )_ Hassi Messaoud-Saipem *Mechanical Engineer commissioning -verify the lines by system and sub-system - verify Alignment flanges. -Follow the punch-list- item B- -Mechanical Completion - Mechanical preparation before starting (general check of piping and Equipment, Instruments). -operation leak test of verified the torque of bult o PROJECT UTBS (Unity of treatment of oil) Hassi Messaoud-Saipem-o COMPANY: LEAD-contracting and trading Ltd., November 2009 - April 2010 Show less



EURL TGCTP/trc sonatrach

• Algeria area/

• Hydrotest Supervisor

  • Nov 2008 - Oct 2009

  *Engineer hydrostatic - Verification of the Equipment’s hydro test (pump of filling pump of prevue; pressure recorder; temperature recorder pressure gage). -verify the certificate of instrument and of Equipment’s hydro test (certificates of conformity of calibration). -hydrostatic program for preparation -verify the boucle in site and installed the group of work -Hydrostatic Preparation (blowing, flushing, increases the pressure; Restatement...) -Follow the above-hydrostatic testing with the client-Sonelgaz -preparation daily report every day. o PROJECT POWER PLANT LARBAA BLIDA-Ansaldo-o COMPANY TGCTP-Excavation Engineering and Construction petroleum -April 2009 - October2009 *Hydrostatic testing engineer (pipeline) - Preparation of the Equipment hydro test (certificates of conformity Equipment and Instruments). - Hydrostatic pipeline (blowing, calibration, filling and increases the pressure, drying) - Follow the above-hydrostatic testing with the client-Sonatrach- and ARH o PROJECT MEDGAS II-CANAGAZ-o COMPANY TGCTP-Excavation Engineering and Petroleum-November 2008 work to marc2009 Show less



ABC ain tellout

• Algérie

• Mechanical engineer

  • 2007 - Oct 2008

  engineer of the Town Hall –APC- Ain Tellout Septombre2007-October2008 engineer of the Town Hall –APC- Ain Tellout Septombre2007-October2008