José Sebastián Maineri López
Maintenance Manager at CETMIC, Centro de Tecnologia de Recursos Minerales y Cerámica (CIC-CONICET La Plata)- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
-
Ingles -
-
Italiano -
Topline Score
Bio
Credentials
-
Foundations of Programming: Programming Paradigms
LinkedInDec, 2017- Oct, 2024 -
Introduction to ISO 9001: 2015
UTN BADec, 2017- Oct, 2024 -
Electronic Fuel Injection (Gasoline)
Pellegrini EngineeringJul, 2015- Oct, 2024 -
Suspension, Design and Tuning of Competition Chassis
Pellegrini EngineeringMar, 2015- Oct, 2024 -
Water Transfer Printing
Hidrográfica 3DJan, 2015- Oct, 2024 -
Automobile mechanics and electricity
Pellegrini EngineeringJul, 2014- Oct, 2024 -
Induced Currents Course Level I
INTIJul, 2013- Oct, 2024 -
Alternative energies
EnersolApr, 2012- Oct, 2024 -
Primeros Auxilios
Cruz Roja ArgentinaDec, 2014- Oct, 2024
Experience
-
-
Maintenance Manager
-
Apr 2019 - Present
• Preparation of the Floor plan • Preparation of the Maintenance Plan • Design and development of test equipment and accessories • Repair of laboratory equipment and instruments • Modification and updating of equipment • Building maintenance tasks • Execution of tests of refractory materials and sands for frackingReferences:Dr. Alberto Scian (Director)E-mail: sciana@cetmic.unlp.edu.arCel: +54 9 1143993756Dr. Nicolás Rendtorff (Deputy… • Preparation of the Floor plan • Preparation of the Maintenance Plan • Design and development of test equipment and accessories • Repair of laboratory equipment and instruments • Modification and updating of equipment • Building maintenance tasks • Execution of tests of refractory materials and sands for frackingReferences:Dr. Alberto Scian (Director)E-mail: sciana@cetmic.unlp.edu.arCel: +54 9 1143993756Dr. Nicolás Rendtorff (Deputy Director)E-mail: rendtorff@cetmic.unlp.edu.arCel: +54 9 1150282190Eng. Tomás Abossio (Technical Manager)E-mail: tabossio@cetmic.unlp.edu.arCel: +54 9 1162903249CETMIC Tel: +54 221-4840167 Show more Show less
-
-
-
-
Postgraduate Assistant
-
Mar 2019 - Present
Postgraduate Assistant in the Chairs Structures II and Structures III of the Department of Aeronautics of the School of Engineering of the UNLP
-
-
-
-
Mechanical Design Engineer
-
May 2018 - Sep 2018
• Design and calculation of machine elements• Compressible flow calculations• Preparation of detailed engineering plans• Advanced Design in SolidWorks• Development of FEM models and simulations in Abaqus.• Electrical design in SolidWorks Electrical.References:Eng. Gabriel Campo (Managing Partner)E-mail: gabriel.campo@invenioing.comCel: +54 9 2944534745
-
-
-
-
Research and Development Engineer
-
Aug 2017 - Apr 2018
• Development of sunflower harvester head• Advanced design in Solidworks• Various design works• Design of folded parts and CNC cutting• Preparation of drawings of parts and assemblies, welding plans.• Dependents: 5References:Ing. Carolina Galli (Production Manager)Cel: +54 9 2215481204Ing. Adrián Brohme (Head of Development Area)E-mail: abrohme@claas.com.arCel: +54 9 2355646973Matías Pérez (Plant Manager)E-mail:… • Development of sunflower harvester head• Advanced design in Solidworks• Various design works• Design of folded parts and CNC cutting• Preparation of drawings of parts and assemblies, welding plans.• Dependents: 5References:Ing. Carolina Galli (Production Manager)Cel: +54 9 2215481204Ing. Adrián Brohme (Head of Development Area)E-mail: abrohme@claas.com.arCel: +54 9 2355646973Matías Pérez (Plant Manager)E-mail: mperzez@claas.com.arCel: +54 9 2345513380CLAAS Argentina Tel: +54 3388471449 Show more Show less
-
-
-
-
Technician
-
Sep 2014 - Aug 2017
• Preparation of reports and dealing with clients.• Interpretation of standards and technical texts in Spanish and English.• Execution of mechanical tests in general under national and international standards.• Motor vehicle homologation tests to obtain the model configuration license (LCM).• Homologation tests for semi-trailers and trailers to obtain the model configuration license (LCM).• Safety test on the seatbelt hooks of various bodies (Peugeot, Citroën, etc.)… • Preparation of reports and dealing with clients.• Interpretation of standards and technical texts in Spanish and English.• Execution of mechanical tests in general under national and international standards.• Motor vehicle homologation tests to obtain the model configuration license (LCM).• Homologation tests for semi-trailers and trailers to obtain the model configuration license (LCM).• Safety test on the seatbelt hooks of various bodies (Peugeot, Citroën, etc.) according to R14.• Hydraulic test of fuel tanks of a satellite launcher.• Weighing and balancing of aircraft (planes and helicopters).• Technical assistance in modifying and fine-tuning a bench to test a carbon fiber cap for a satellite launcher.• Technical assistance in the manufacture and integration of satellite launch vehicles (Tronador II Project, VEX 1-A and 1-B).• Gimbal Compression Tests (Universal Joint) intended to link the VEX 1-A, 1-B and 5-A engine)• Maintenance of hydraulic machine for static and dynamic tests Losenhausen.• Technical assistance in the manufacture of an electric tricycle with a tubular chassis powered by two brushless motors and lithium batteries.• Various workshop activities (welding, turning, electricity, etc.).• Assistance in the assembly and commissioning of a large Hydraulic Shaker designed to test sections of the satellite launcher.• Design in Catia and simulations in Abaqus• Non Destructive Tests (Penetrating Inks) on tested pieces.References:Eng. Claudio M. Rimoldi (Former Laboratory Member and Teacher)E-mail: crimoldi@ing.unlp.edu.arEng. Pablo L. Ringegni (Director of the Laboratory and Teacher)E-mail: ringegni@ing.unlp.edu.arCel: +54 9 2214764335Eng. Damián Lunardelli (Member of the Laboratory)E-mail: dlunardelli@ing.unlp.edu.arCel: +54 9 1139516247U.I.D. G.E.M.A Tel: +54 221 4258911 Int 145 Show more Show less
-
-
-
-
Inspector
-
May 2013 - Sep 2014
• Inspection of oil storage tanks and its derivatives using Non Destructive Testing (NDT) techniques, following API 650 and 653 standards.• Performing tests of permanent linear variation, resistance to compression and resistance to abrasion on specimens of various refractory materials according to API RP 936 standard.• Inspection of heat exchangers using eddy current equipment.• Inspection of pressure vessels with and without fire following API 510 and ASME Code - Section VIII -… • Inspection of oil storage tanks and its derivatives using Non Destructive Testing (NDT) techniques, following API 650 and 653 standards.• Performing tests of permanent linear variation, resistance to compression and resistance to abrasion on specimens of various refractory materials according to API RP 936 standard.• Inspection of heat exchangers using eddy current equipment.• Inspection of pressure vessels with and without fire following API 510 and ASME Code - Section VIII - Division 1 Pressure Vessels.• In charge of storage and maintenance of equipment, both mechanical and electrical. Assembly of single-phase and three-phase boards.• Work at height.• Interpretation of plans.• Drawing plans and sketches in AutoCAD.• Interpretation of standards and technical texts in English.• Preparation of reports of the inspections and tests carried out.References:Eng. Luis M. Tuero (Operations Manager)Cel: +54 9 2215018821Manuel Tuero (Technical Office)Cel: +54 9 2215470620 Show more Show less
-
-
-
-
Scholarship holder
-
Jun 2010 - May 2013
• Preparation of reports and dealing with clients.• Interpretation of standards and technical texts in Spanish and English.• Execution of mechanical tests in general under national and international standards.• Motor vehicle homologation tests to obtain the model configuration license (LCM).• Homologation tests for semi-trailers and trailers to obtain the model configuration license (LCM).• Safety test on the seatbelt hooks of various bodies (Peugeot, Citroën, etc.)… • Preparation of reports and dealing with clients.• Interpretation of standards and technical texts in Spanish and English.• Execution of mechanical tests in general under national and international standards.• Motor vehicle homologation tests to obtain the model configuration license (LCM).• Homologation tests for semi-trailers and trailers to obtain the model configuration license (LCM).• Safety test on the seatbelt hooks of various bodies (Peugeot, Citroën, etc.) according to R14.• Hydraulic test of fuel tanks of a satellite launcher.• Weighing and balancing of aircraft (planes and helicopters).• Technical assistance in modifying and fine-tuning a bench to test a carbon fiber cap for a satellite launcher.• Technical assistance in the manufacture and integration of satellite launch vehicles (Tronador II Project, VEX 1-A and 1-B).• Gimbal Compression Tests (Universal Joint) intended to link the VEX 1-A, 1-B and 5-A engine)• Maintenance of hydraulic machine for static and dynamic tests Losenhausen.• Technical assistance in the manufacture of an electric tricycle with a tubular chassis powered by two brushless motors and lithium batteries.• Various workshop activities (welding, turning, electricity, etc.).• Assistance in the assembly and commissioning of a large Hydraulic Shaker designed to test sections of the satellite launcher.• Design in Catia and simulations in Abaqus• Non Destructive Tests (Penetrating Inks) on tested pieces.References:Eng. Claudio M. Rimoldi (Former Laboratory Member and Teacher)E-mail: crimoldi@ing.unlp.edu.arEng. Pablo L. Ringegni (Director of the Laboratory and Teacher)E-mail: ringegni@ing.unlp.edu.arCel: +54 9 2214764335Eng. Damián Lunardelli (Member of the Laboratory)E-mail: dlunardelli@ing.unlp.edu.arCel: +54 9 1139516247U.I.D. G.E.M.A Tel: +54 221 4258911 Int 145 Show more Show less
-
-
Education
-
-
Universidad Nacional de La Plata
-
-
E.E.T. nº1 "Libertador Simón Bolivar"
Community
