Shahab Owlia
Customer Manager at Tula Technology- Claim this Profile
Click to upgrade to our gold package
for the full feature experience.
-
English Native or bilingual proficiency
-
French Native or bilingual proficiency
Topline Score
Bio
Anton De Ruiter
I had the pleasure of supervising Shahab Owlia's studies toward a Master of Applied Science degree at Carleton University. As part of this work, he developed an autonomous obstacle avoidance method for a fixed-wing UAV. He showed great initiative, and was highly self-motivated. Not only did he have a solid grasp of the required mathematics and engineering sciences, he was also very capable on the practical side, writing simulation code, and fitting a radio-controlled aircraft with an autopilot, tuning it and getting it flying well. In addition, he has very good written and oral communication skills. His thesis was very well written. Overall, he produced excellent work. I very much enjoyed working with him.
Paul V Straznicky
Shahab is a highly motivated aerospace engineering student with excellent aptitude for research and development. He is results oriented and gets things done. It has been a pleasure to work with him.
Anton De Ruiter
I had the pleasure of supervising Shahab Owlia's studies toward a Master of Applied Science degree at Carleton University. As part of this work, he developed an autonomous obstacle avoidance method for a fixed-wing UAV. He showed great initiative, and was highly self-motivated. Not only did he have a solid grasp of the required mathematics and engineering sciences, he was also very capable on the practical side, writing simulation code, and fitting a radio-controlled aircraft with an autopilot, tuning it and getting it flying well. In addition, he has very good written and oral communication skills. His thesis was very well written. Overall, he produced excellent work. I very much enjoyed working with him.
Paul V Straznicky
Shahab is a highly motivated aerospace engineering student with excellent aptitude for research and development. He is results oriented and gets things done. It has been a pleasure to work with him.
Anton De Ruiter
I had the pleasure of supervising Shahab Owlia's studies toward a Master of Applied Science degree at Carleton University. As part of this work, he developed an autonomous obstacle avoidance method for a fixed-wing UAV. He showed great initiative, and was highly self-motivated. Not only did he have a solid grasp of the required mathematics and engineering sciences, he was also very capable on the practical side, writing simulation code, and fitting a radio-controlled aircraft with an autopilot, tuning it and getting it flying well. In addition, he has very good written and oral communication skills. His thesis was very well written. Overall, he produced excellent work. I very much enjoyed working with him.
Paul V Straznicky
Shahab is a highly motivated aerospace engineering student with excellent aptitude for research and development. He is results oriented and gets things done. It has been a pleasure to work with him.
Anton De Ruiter
I had the pleasure of supervising Shahab Owlia's studies toward a Master of Applied Science degree at Carleton University. As part of this work, he developed an autonomous obstacle avoidance method for a fixed-wing UAV. He showed great initiative, and was highly self-motivated. Not only did he have a solid grasp of the required mathematics and engineering sciences, he was also very capable on the practical side, writing simulation code, and fitting a radio-controlled aircraft with an autopilot, tuning it and getting it flying well. In addition, he has very good written and oral communication skills. His thesis was very well written. Overall, he produced excellent work. I very much enjoyed working with him.
Paul V Straznicky
Shahab is a highly motivated aerospace engineering student with excellent aptitude for research and development. He is results oriented and gets things done. It has been a pleasure to work with him.
Experience
-
Tula Technology
-
United States
-
Software Development
-
1 - 100 Employee
-
Customer Manager
-
Dec 2022 - Present
-
-
Staff Research Engineer
-
Nov 2021 - Present
EV Battery Research
-
-
Senior Calibration Engineer
-
Aug 2018 - Nov 2021
EV drive cycle operation for Dynamic Motor Drive (DMD)EV battery researchMiller engine Dynamic Skip Fire (mDSF)
-
-
-
General Motors
-
United States
-
Motor Vehicle Manufacturing
-
700 & Above Employee
-
Calibration Specialist
-
Dec 2016 - Sep 2018
- Driver Torque Request and Engine Speed Control. - Closed-loop fuel control and diagnostics, 2.0 L Turbo RWD. - Driver Torque Request and Engine Speed Control. - Closed-loop fuel control and diagnostics, 2.0 L Turbo RWD.
-
-
-
FCA Fiat Chrysler Automobiles
-
United Kingdom
-
Motor Vehicle Manufacturing
-
700 & Above Employee
-
Engine Controls/Calibration
-
Oct 2015 - Dec 2016
● SRT Hellcat 6.2L Supercharged HEMI V8 thermal controls.
-
-
Engine Controls/Calibration
-
Feb 2014 - Dec 2016
● GMET4 2.0L Turbocharged controls/calibration.
-
-
-
IAV Automotive Engineering, Inc.
-
United States
-
Professional Services
-
200 - 300 Employee
-
Powertrain Controls Engineer
-
Dec 2013 - Dec 2016
-
-
-
Carleton University
-
Higher Education
-
700 & Above Employee
-
Research Assistant
-
Sep 2010 - Mar 2013
● Worked in a multi-disciplinary group performing research to develop an autonomous UAV for geophysical surveys.● Conducted research in the field of UAV autonomous operations, focusing on real-time obstacle avoidance and tailored academic research to end-product requirements.● Assisted research team to further investigate specific UAV requirements based on expected encounter scenarios.● Developed an autonomous UAV testbed which facilitates further guidance research. - Integrated an MP2028 autopilot on a selected airframe and tuned it to cope with the used airframe. In result, extensive hands-on experience was gained with PID controllers. - Integrated custom telemetry on the UAV testbed for online communication with the GCS and realtime remote guidance.● Trained to fly R/C aircrafts to enhance understanding of aircraft dynamics.● Scheduled and managed UAV fieldwork to maximize flight test efficiency.● Supervised an undergraduate volunteer that helped in the autopilot integration process. Show less
-
-
Teacher Assistant
-
Sep 2010 - Apr 2012
● Introduction to engineering, ECOR1010 - Ran laboratories where Excel, ProE, Matlab and Maple were introduced and taught. - Project TA position: Coordinated over 900 students' term project ● Thermodynamics laboratory, Solid Mechanics laboratory
-
-
-
-
Part-Time Engineer Assistant
-
2006 - 2010
● Participated in numerous automation projects in several different industries such as packaging, food and printing. ● Assisted lead engineer in programming and installing PLCs, HMIs, AC servo motors and stepper motors. ● Troubleshooted and provided technical support for automation products sold independently to quickly solve minor problems over the phone. ● Showcased company's products and services in several international fairs to attract new customers. ● Helped develop setup manuals for servo motors and stepper motors. ● Received recognition upon leaving the company for outstanding commitment to ServoTech. Show less
-
-
Education
-
2010 - 2012
Carleton University
M.A.Sc, Mechanical & Aerospace Engineering -
Ferdowsi University of Mashhad
Bachelor of Science (B.Sc.), Solid Mechanics
Community
